Human-in-the-loop System Design and Control Adaptation for Behavior-Assistant Robots

  • 6,012

    Total downloads

  • 28k

    Total views and downloads

Download PDFDownload EPUB

Submit your idea

You will be redirected to our submission process.

Submit your manuscript summarySubmit your manuscript

About this Research Topic

Submission closed

Background

With the progress and development of human-robot systems, the coordination among humans, robots, and environments has become increasingly sophisticated. In this Research Topic, we focus on an important field in robotics and automation disciplines, which is commonly defined as behavior-assistant robots. The scope includes but is not limited to: (1) rehabilitation assistive devices, such as rigid/soft exoskeletons, prosthetic systems, orthoses, and intelligent wheelchairs; (2) intelligent medical systems, such as endoscopic robots, surgical robots, and the navigation systems; (3) industrial application devices, such as collaborative manipulators, load-bearing exoskeletons, supernumerary robotic limbs; (4) intelligent domestic devices, such as mobile robots, elderly-care robots, walking-aids robots and so on. The emergence of robot-assisted daily behaviors, based on aforementioned devices, is gradually becoming part of our social lives, which can improve weak motor abilities, enhance physical functionalities, and enable various other benefits.

For the effective operation of a behavior-assistant robot, one of the most commonly used control strategies is the human-in-the-loop (HIL) control architecture. As widely recognized, the analysis of technological pathways for behavior-assistant robots could be approached from two perspectives: one is “robot and automation”, where we focus on mechanism and design, actuation, control, hardware and integration; of the other is “human and environment”, where we focus on sensors, data, information fusion, pattern recognition, decision and interaction. Further connection of these core technologies forms HIL systems, and has achieved significant progress so far.

However, the majority of HIL-based robots have not yet achieved stable closed-loop system design, and the integration of human-robot interaction remains a challenge. For example: in recent years, rigid/soft exoskeletons have gained significant attention. HIL control using physiological and image information has been realized in Hybrid Assistive Limb exoskeleton (HAL) and the Exosuit system (Wyss Institute, Harvard University). However, there is still a considerable gap to be bridged before advanced technologies can be widely applied in clinical rehabilitation settings, especially for improving the safety of HIL systems and neural interaction control. For surgical robots and manipulator arms, they have exhibited high precision in repetitive positioning and accurate force control. However, there is ongoing research on how to create a more comfortable and user-friendly environment for surgeons to perform robot-assisted surgeries. Meanwhile, the application scenarios for domestic robots are more diverse. It is crucial to explore how to make devices more user-friendly for the elderly, patients, and people with disabilities. Further research is needed to enhance the practicality of automation devices in these contexts. In summary, how to design stable HIL systems for behavior-assistant robots still requires further investigation.

In addition, there is little research work at this stage to truly realize the intelligence of HIL systems from theoretical, technical, and application perspectives. One important reason is the adaptation issue. Indeed, the most common characteristics of behavior-assistant robots are that the participants/users are diverse, and the devices are generally designed to be adaptable to different individuals. Thus, how to ensure stable adaptation for different individuals is a highly challenging problem. Additionally, human-robot systems also face challenges from environmental factors. For instance, rehabilitation devices such as prostheses, exoskeletons and orthoses, often encounter various walking environments (such as stairs, slopes, etc.). Collaborative manipulators such as surgical robots and similar devices, often face uncertainties in terms of objects and control tasks. In summary, how to realize an adaptive HIL robotic system and to robustly cope with uncertainties, is a newly emerging research area and could generate breakthrough results.

We cordially welcome authors to submit their primary/original research papers and reviews to contribute to this Research Topic. Research Report, Mini Reviews, Opinion, and other types are also fine. Topic areas include but are not limited to:
• Sensors development, multimodal information fusion, and pattern recognition for mechanical/ physiological electrical/image information;
• Innovative structural design, hardware development, system integration, interaction control, and verification of behavior-assistant robot;
• Human-robot interaction control for behavior-assistant robots;
• Human-robot-environment fusion for behavior-assistant robots;
• Adaptive methods and technologies in HIL systems;
• Practical applications of HIL robotic control systems.

Keywords: human-in-the-loop system, behavior-assistant robots, human-robot interaction, human-robot-environment fusion, control system, uncertainties, adaptation, applications

Important note: All contributions to this Research Topic must be within the scope of the section and journal to which they are submitted, as defined in their mission statements. Frontiers reserves the right to guide an out-of-scope manuscript to a more suitable section or journal at any stage of peer review.

Topic editors

Frequently asked questions

  • Frontiers' Research Topics are collaborative hubs built around an emerging theme.Defined, managed, and led by renowned researchers, they bring communities together around a shared area of interest to stimulate collaboration and innovation.

    Unlike section journals, which serve established specialty communities, Research Topics are pioneer hubs, responding to the evolving scientific landscape and catering to new communities.

  • The goal of Frontiers' publishing program is to empower research communities to actively steer the course of scientific publishing. Our program was implemented as a three-part unit with fixed field journals, flexible specialty sections, and dynamically emerging Research Topics, connecting communities of different sizes and maturity.

    Research Topics originate from the scientific community. Many of our Research Topics are suggested by existing editorial board members who have identified critical challenges or areas of interest in their field.

  • As an editor, Research Topics will help you build your journal, as well as your community, around emerging, cutting-edge research. As research trailblazers, Research Topics attract high-quality submissions from leading experts all over the world.

    A thriving Research Topic can potentially evolve into a new specialty section if there is sustained interest and a growing community around it.

  • Each Research Topic must be approved by the specialty chief editor, and it falls under the editorial oversight of our editorial boards, supported by our in-house research integrity team. The same standards and rigorous peer review processes apply to articles published as part of a Research Topic as for any other article we publish.

    In 2023, 80% of the Research Topics we published were edited or co-edited by our editorial board members, who are already familiar with their journal's scope, ethos, and publishing model. All other topics are guest edited by leaders in their field, each vetted and formally approved by the specialty chief editor.

  • Publishing your article within a Research Topic with other related articles increases its discoverability and visibility, which can lead to more views, downloads, and citations. Research Topics grow dynamically as more published articles are added, causing frequent revisiting, and further visibility.

    As Research Topics are multidisciplinary, they are cross-listed in several fields and section journals – increasing your reach even more and giving you the chance to expand your network and collaborate with researchers in different fields, all focusing on expanding knowledge around the same important topic.

    Our larger Research Topics are also converted into ebooks and receive social media promotion from our digital marketing team.

     

  • Frontiers offers multiple article types, but it will depend on the field and section journals in which the Research Topic will be featured. The available article types for a Research Topic will appear in the drop-down menu during the submission process.

    Check available article types here 

  • Yes, we would love to hear your ideas for a topic. Most of our Research Topics are community-led and suggested by researchers in the field. Our in-house editorial team will contact you to talk about your idea and whether you’d like to edit the topic. If you’re an early-stage researcher, we will offer you the opportunity to coordinate your topic, with the support of a senior researcher as the topic editor. 

    Suggest your topic here 

  • A team of guest editors (called topic editors) lead their Research Topic. This editorial team oversees the entire process, from the initial topic proposal to calls for participation, the peer review, and final publications.

    The team may also include topic coordinators, who help the topic editors send calls for participation, liaise with topic editors on abstracts, and support contributing authors. In some cases, they can also be assigned as reviewers.

  • As a topic editor (TE), you will take the lead on all editorial decisions for the Research Topic, starting with defining its scope. This allows you to curate research around a topic that interests you, bring together different perspectives from leading researchers across different fields and shape the future of your field. 

     

    You will choose your team of co-editors, curate a list of potential authors, send calls for participation and oversee the peer review process, accepting or recommending rejection for each manuscript submitted.

  • As a topic editor, you're supported at every stage by our in-house team. You will be assigned a single point of contact to help you on both editorial and technical matters. Your topic is managed through our user-friendly online platform, and the peer review process is supported by our industry-first AI review assistant (AIRA).

  • If you’re an early-stage researcher, we will offer you the opportunity to coordinate your topic, with the support of a senior researcher as the topic editor. This provides you with valuable editorial experience, improving your ability to critically evaluate research articles and enhancing your understanding of the quality standards and requirements for scientific publishing, as well as the opportunity to discover new research in your field, and expand your professional network.

  • Yes, certificates can be issued on request. We are happy to provide a certificate for your contribution to editing a successful Research Topic.

  • Research Topics thrive on collaboration and their multi-disciplinary approach around emerging, cutting-edge themes, attract leading researchers from all over the world.

  • As a topic editor, you can set the timeline for your Research Topic, and we will work with you at your pace. Typically, Research Topics are online and open for submissions within a few weeks and remain open for participation for 6 – 12 months. Individual articles within a Research Topic are published as soon as they are ready.

    Find out more about our Research Topics

  • Our fee support program ensures that all articles that pass peer review, including those published in Research Topics, can benefit from open access – regardless of the author's field or funding situation.

    Authors and institutions with insufficient funding can apply for a discount on their publishing fees. A fee support application form is available on our website.

  • In line with our mission to promote healthy lives on a healthy planet, we do not provide printed materials. All our articles and ebooks are available under a CC-BY license, so you can share and print copies.

     

Participating Journals

Impact

  • 28kTopic views
  • 20kArticle views
  • 6,012Article downloads
View impact