Asanda Mditshwa
Ghulam Khaliq
Zaharan Hussein
Shaghef Ejaz- 1Department of Horticultural Sciences, School of Agricultural, Earth and Environmental Sciences, University of KwaZulu-Natal, Pietermaritzburg, South Africa
- 2Department of Horticulture, Faculty of Agriculture, Lasbela University of Agriculture, Water and Marine Sciences, Uthal, Pakistan
- 3Department of Applied Sciences, College of Science and Technical Education, Mbeya University of Science and Technology, Mbeya, Tanzania
- 4Department of Horticulture, Bahauddin Zakariya University, Multan, Pakistan
Editorial on the Research Topic
Sustainable postharvest management practices for fresh produce
Food losses have huge environmental implications. Postharvest losses are not just the loss of food—it is the loss of water, energy, fuel, fertilizers, and many other resources. Food waste has a significant carbon footprint and makes a major contribution toward greenhouse gas emissions (Niu et al., 2022). Thus, developing sustainable and resilient food systems cannot be achieved without “arresting” postharvest food losses. The high perishability of horticultural fresh produce, particularly in underdeveloped and developing countries, requires pragmatic approaches to postharvest management. While various technologies have been developed to maintain quality and extend the shelf-life of fresh produce, the high costs and health complications associated with some postharvest techniques remain a major concern. The use of chemical treatments poses various threats both to consumers and the environment. There is a need for sustainable alternative treatments that are environmental-friendly and cost-effective. The articles in this Research Topic involve innovative methods and practices that can be employed to extend shelf-life and reduce losses along food handling, value and cold chain.
Green mold, caused by Penicillium digitatum, leads to serious economic losses at postharvest. It affects various fruits and vegetables, but it is more prevalent in citrus fruits—accounting for more than 90% of decay incidence (Cheng et al., 2020). The potential of UV-C irradiation as the postharvest treatment for controlling decay has been extensively studied (Mditshwa et al., 2017). In this Research Topic, the research of Phonyiam et al. evaluated the effect of UV-C irradiation on decay incidence caused by green mold in satsuma mandarin fruit. The research team found UV-C to be highly effective in suppressing the green mold incidence. The in vivo studies demonstrated that the efficacy of UV-C is linked to its ability to (i) maintain the cellular structure of the albedo tissues, (ii) reduce the levels of malondialdehyde, and (iii) promote the accumulation of jasmonic acid, total phenolics and flavonoids which strengthens the biochemical defense mechanisms of the treated fruit. Sripong et al. (2015) and Bambalele et al. (2021) also provided possible mechanisms used by UV-C to extend shelf-life and reduce decay incidence. Other studies have shown that UV-C elevates the expression of defense-related enzymes such as GLU and PAL, while it suppresses the respiration and ethylene-linked enzymes such as ACS and ACO (Sripong et al., 2015; George et al., 2016).
Chilling injury (CI) is an important physiological disorder largely affecting fresh produce from tropical and subtropical origins. The symptoms of CI include necrotic spots, pulp browning, and the affected produce becomes unmarketable. Affandi et al. conducted a study to investigate the role played by growth and storage temperatures on CI incidence in dwarf tomatoes. From the flowering stage, two tomatoes cultivars, “Ponchi Re” and “Tarzan', were kept 16, 22, or 28°C under controlled greenhouse conditions. At mature green stage, the tomatoes were harvested and stored at either 20°C for 20 days or 4°C for 15 days and thereafter stored at shelf-life conditions. Their findings showed that the susceptibility of fresh produce to CI is cultivar-dependent with “Tarzan” tomatoes showing higher incidence compared to “Ponchi Re”. The research team also found that “Tarzan” tomatoes grown under low temperatures had higher membrane integrity and CI tolerance, however, “Ponchi Re” showed opposite results. In addition to postharvest technologies such as hot water treatments, 1-MCP, UV-C and edible coatings used to control CI (Zhang et al., 2021), this Research Topic suggests that preharvest growth factors, especially temperature, must be managed and regulated based on the specific cultivar requirements. Harvest maturity is another critical factor influencing fruit susceptibility to CI (Rai et al., 2022), and the sensitivity depends on fruit type and cultivar. Strong defense mechanisms against postharvest physiological, pathological and mechanical disorders can be developed through proper management of the crop in the field.
The drying of fresh produce is a commonly used postharvest technique for preserving quality and extending shelf-life. There are various drying techniques such as solar drying, vacuum during and ultrasound, with varying input costs and impact on the treated produce. In this Research Topic, Zahoor et al. assessed the response of chicory herb quality and biochemical attributes to microwave-assisted fluidized bed drying (MAFBD). Based on the tested models, the optimum microwave power, temperature and velocity of 462.3 W, 70°C and 15 m/s achieved the highest consumer desirability and higher concentrations of ascorbic acid, antioxidants, carotene and total phenolics. In terms of energy use, microwave drying is considered to be highly efficient compared to its counterparts such as conventional hot air drying, which is known for longer processing time and negative impact on quality (Hu et al., 2006; Lv et al., 2016). Considering the urgent need for developing economic and sustainable postharvest practices, the decarbonization of drying systems has become a topical issue in food research (Adnouni et al., 2022). Renewable energy-based systems with relatively shorter drying duration while offering superior quality should be explored.
The management of postharvest supply chains is pivotal in reducing food losses. To ensure uncompromised quality, every step must be carefully managed, from the farmgate to the packhouse to the consumer table. Le et al. conducted a comprehensive literature review on causes of quality loss along the mango fruit supply chains. They identified improper harvest maturity, packaging, storage, distribution and pre-treatments as the major contributors to postharvest losses. This research team also provided techniques that can be employed at critical stages of the supply chain. The research team proposed that harvest date should be selected based on well-established and tested maturity indexes. Postharvest treatments such as edible coatings, 1-MCP and hot water reduce respiration rate and ethylene production thereby extending the shelf-life (Khaliq et al., 2015; Bambalele et al., 2021). The packaging has to be well-designed in order to minimize mechanical damage during transportation. Moreover, the storage conditions must be constantly monitored to avoid storage temperature abuse during supply chain. In fact, the possibility of tracking respiration rate in real-time should be explored for highly perishable fresh produce.
The articles in this Research Topic highlight the critical role played by postharvest practices in reducing food losses. All the articles provided possible mechanisms used by the treatments to suppress the array of unwanted physiological changes and disorders. The postharvest practices discussed in this issue are cost-effective with relatively low energy requirements. All the research findings in this issue could be considered for food industry application, and also used as the basis for further investigation.
Author contributions
All authors listed have made a substantial, direct, and intellectual contribution to the work and approved it for publication.
Conflict of interest
The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
References
Adnouni, M., Jiang, L., Zhang, X. J., Zhang, L. Z., Pathare, P. B., and Roskilly, A. P. (2022). Computational modelling for decarbonised drying of agricultural products: sustainable processes, energy efficiency, and quality improvement. J. Food Eng. 338:111247. doi: 10.1016/j.jfoodeng.2022.111247
Bambalele, N. L., Mditshwa, A., Magwaza, L. S., and Tesfay, S. Z. (2021). Recent advances on postharvest technologies of mango fruit: a review. Int. J. Fruit Sci. 21, 565–586. doi: 10.1080/15538362.2021.1918605
Cheng, Y., Lin, Y., Cao, H., and Li, Z. (2020). Citrus postharvest green mold: recent advances in fungal pathogenicity and fruit resistance. Microorganisms 8, 449. doi: 10.3390/microorganisms8030449
George, D. S., Razali, Z., Santhirasegaram, V., and Somasundram, C. (2016). Effect of postharvest ultraviolet-C treatment on the proteome changes in fresh cut mango (Mangifera indica L. cv. Chokanan). J. Sci. Food Agric. 96, 2851–2860. doi: 10.1002/jsfa.7454
Hu, Q. G., Zhang, M., Mujumdar, A. S., Xiao, G. N., and Jin-cai, S. (2006). Drying of edamames by hot air and vacuum microwave combination. J. Food Eng. 77, 977–982. doi: 10.1016/j.jfoodeng.2005.08.025
Khaliq, G., Mohamed, M. T. M., Ali, A., Ding, P., and Ghazali, H. M. (2015). Effect of gum arabic coating combined with calcium chloride on physico-chemical and qualitative properties of mango (Mangifera indica L.) fruit during low temperature storage. Sci. Hortic. 190, 187–194. doi: 10.1016/j.scienta.2015.04.020
Lv, W., Li, S., Han, Q., Zhao, Y., and Wu, H. (2016). Study of the drying process of ginger (Zingiber officinale Roscoe) slices in microwave fluidized bed dryer. Drying Technol. 34, 1690–1699. doi: 10.1080/07373937.2015.1137932
Mditshwa, A., Magwaza, L. S., Tesfay, S. Z., and Mbili, N. C. (2017). Effect of ultraviolet irradiation on postharvest quality and composition of tomatoes: a review. J. Food Sci. Technol. 54, 3025–3035. doi: 10.1007/s13197-017-2802-6
Niu, Z., Ng, S. J., Li, B., Han, J., Wu, X., and Huang, Y. (2022). Food waste and its embedded resources loss: a provincial level analysis of China. Sci. Total Environ. 823, 153665. doi: 10.1016/j.scitotenv.2022.153665
Rai, A., Kumari, K., and Vashistha, P. (2022). Umbrella review on chilling injuries: post-harvest issue, cause, and treatment in tomato. Sci. Hortic. 293, 110710. doi: 10.1016/j.scienta.2021.110710
Sripong, K., Jitareerat, P., Tsuyumu, S., Uthairatanakij, A., Srilaong, V., Wongs-Aree, C., et al. (2015). Combined treatment with hot water and UV-C elicits disease resistance against anthracnose and improves the quality of harvested mangoes. Crop Prot. 77, 1–8. doi: 10.1016/j.cropro.2015.07.004
Keywords: green mold, postharvest, chilling injury, UV-C, microwave-assisted drying, storage temperature
Citation: Mditshwa A, Khaliq G, Hussein Z and Ejaz S (2023) Editorial: Sustainable postharvest management practices for fresh produce. Front. Sustain. Food Syst. 7:1143759. doi: 10.3389/fsufs.2023.1143759
Received: 13 January 2023; Accepted: 30 January 2023;
Published: 13 February 2023.
Edited and reviewed by: Pankaj B. Pathare, Sultan Qaboos University, Oman
Copyright © 2023 Mditshwa, Khaliq, Hussein and Ejaz. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Asanda Mditshwa, 
bWRpdHNod2FhJiN4MDAwNDA7dWt6bi5hYy56YQ==