About this Research Topic

Submission closed

Background

Global economic losses due to severe weather events have been growing dramatically over the past two decades. A large proportion of these are due to severe wind storms, which can cause destruction over large areas, as in the case of tropical cyclones, or relatively small areas, as in the case of tornadoes.

The primary tool of wind engineering has been the boundary layer wind tunnel. One of the earliest studies in the modern-era of wind engineering was conducted by Jack Cermak and Alan Davenport in the early 1960s for the World Trade Center towers. Since that time, wind design for tall buildings and long bridges has become reasonably standardized, with many boundary layer wind tunnels built around the world to determine wind loads and responses of these types of engineered structures. Such wind tunnels typical use length scales in the range from about 1/200 to 1/500.

Post-event damage surveys and analysis of loss data indicate that much of the damage and losses in wind-related natural disasters is to residential structures, which, in many locations of the world, are not engineered. However, even engineered buildings can sustain considerable damage, although this is typically to building envelope (e.g., cladding systems). Significant failures of structural systems are relatively rare. Non-engineered structures are complex to analyze since they often utilize materials which do not have reliable (i.e., engineered) properties but which can have a significant impact on real-world performance. Such buildings often have structural systems which are ill-defined, such as wood-frame houses in North America, where non-structural materials play a significant roll. Cladding systems on engineered buildings also present challenges, especially multi-layer systems where typical wind tunnel model scales are seldom large enough to resolve important details.

The wind field itself also presents unique challenges, particularly for the smaller, fast moving storms, such as those that occur during thunderstorms. Tornadoes, for example, have complex flow structures that are not at all suited to straight-line wind tunnels since the flow is primarily rotational and may have large vertical components. Even the straight-line flows that occur in downbursts or gust fronts may not be appropriate since such flow fields have sharp spatial and temporal gradients, with different vortical structures in the flow. While design for such types of storms has not generally occurred historically, particularly for non-engineered buildings, rising losses have lead some communities and designers to begin to consider this.

To address the growing losses, many new large-scale and full-scale laboratories have been developed to solve many of the particular issues that could not be solved with traditional boundary layer wind tunnels, testing laboratories or methods of analysis. The purpose of this Research Topic is to discuss in detail some of these issues with a particular emphasis on the large-scale and full-scale laboratory-based approaches being developed to address them.

Keywords: Natural disaster mitigation, wind loads, non-synoptic wind storms, large-scale testing, components & cladding

Important note: All contributions to this Research Topic must be within the scope of the section and journal to which they are submitted, as defined in their mission statements. Frontiers reserves the right to guide an out-of-scope manuscript to a more suitable section or journal at any stage of peer review.

Topic editors

gregory a kopp
Western University
London, Canada

Frequently asked questions

Frontiers' Research Topics are collaborative hubs built around an emerging theme.Defined, managed, and led by renowned researchers, they bring communities together around a shared area of interest to stimulate collaboration and innovation.
Unlike section journals, which serve established specialty communities, Research Topics are pioneer hubs, responding to the evolving scientific landscape and catering to new communities.
The goal of Frontiers' publishing program is to empower research communities to actively steer the course of scientific publishing. Our program was implemented as a three-part unit with fixed field journals, flexible specialty sections, and dynamically emerging Research Topics, connecting communities of different sizes and maturity.
Research Topics originate from the scientific community. Many of our Research Topics are suggested by existing editorial board members who have identified critical challenges or areas of interest in their field.
As an editor, Research Topics will help you build your journal, as well as your community, around emerging, cutting-edge research. As research trailblazers, Research Topics attract high-quality submissions from leading experts all over the world.
A thriving Research Topic can potentially evolve into a new specialty section if there is sustained interest and a growing community around it.
Each Research Topic must be approved by the specialty chief editor, and it falls under the editorial oversight of our editorial boards, supported by our in-house research integrity team. The same standards and rigorous peer review processes apply to articles published as part of a Research Topic as for any other article we publish.
In 2023, 80% of the Research Topics we published were edited or co-edited by our editorial board members, who are already familiar with their journal's scope, ethos, and publishing model. All other topics are guest edited by leaders in their field, each vetted and formally approved by the specialty chief editor.
Publishing your article within a Research Topic with other related articles increases its discoverability and visibility, which can lead to more views, downloads, and citations. Research Topics grow dynamically as more published articles are added, causing frequent revisiting, and further visibility.
As Research Topics are multidisciplinary, they are cross-listed in several fields and section journals – increasing your reach even more and giving you the chance to expand your network and collaborate with researchers in different fields, all focusing on expanding knowledge around the same important topic.
Our larger Research Topics are also converted into ebooks and receive social media promotion from our digital marketing team.
 
Frontiers offers multiple article types, but it will depend on the field and section journals in which the Research Topic will be featured. The available article types for a Research Topic will appear in the drop-down menu during the submission process.
Check available article types here 
Yes, we would love to hear your ideas for a topic. Most of our Research Topics are community-led and suggested by researchers in the field. Our in-house editorial team will contact you to talk about your idea and whether you’d like to edit the topic. If you’re an early-stage researcher, we will offer you the opportunity to coordinate your topic, with the support of a senior researcher as the topic editor. 

Suggest your topic here 
A team of guest editors (called topic editors) lead their Research Topic. This editorial team oversees the entire process, from the initial topic proposal to calls for participation, the peer review, and final publications.
The team may also include topic coordinators, who help the topic editors send calls for participation, liaise with topic editors on abstracts, and support contributing authors. In some cases, they can also be assigned as reviewers.
As a topic editor (TE), you will take the lead on all editorial decisions for the Research Topic, starting with defining its scope. This allows you to curate research around a topic that interests you, bring together different perspectives from leading researchers across different fields and shape the future of your field. 
 
You will choose your team of co-editors, curate a list of potential authors, send calls for participation and oversee the peer review process, accepting or recommending rejection for each manuscript submitted.
As a topic editor, you're supported at every stage by our in-house team. You will be assigned a single point of contact to help you on both editorial and technical matters. Your topic is managed through our user-friendly online platform, and the peer review process is supported by our industry-first AI review assistant (AIRA).
If you’re an early-stage researcher, we will offer you the opportunity to coordinate your topic, with the support of a senior researcher as the topic editor. This provides you with valuable editorial experience, improving your ability to critically evaluate research articles and enhancing your understanding of the quality standards and requirements for scientific publishing, as well as the opportunity to discover new research in your field, and expand your professional network.
Yes, certificates can be issued on request. We are happy to provide a certificate for your contribution to editing a successful Research Topic.
Research Topics thrive on collaboration and their multi-disciplinary approach around emerging, cutting-edge themes, attract leading researchers from all over the world.
As a topic editor, you can set the timeline for your Research Topic, and we will work with you at your pace. Typically, Research Topics are online and open for submissions within a few weeks and remain open for participation for 6 – 12 months. Individual articles within a Research Topic are published as soon as they are ready.
Find out more about our Research Topics
Our fee support program ensures that all articles that pass peer review, including those published in Research Topics, can benefit from open access – regardless of the author's field or funding situation.
Authors and institutions with insufficient funding can apply for a discount on their publishing fees. A fee support application form is available on our website.
In line with our mission to promote healthy lives on a healthy planet, we do not provide printed materials. All our articles and ebooks are available under a CC-BY license, so you can share and print copies.

Share on

Frontiers in Built Environment

Wind Engineering and Science

Impact

46kTopic views
34kArticle views
6,953Article downloads

View impact

Submit your idea