ORIGINAL RESEARCH
Published on 17 Nov 2022
Assessment of a novel patient-specific 3D printed multi-material simulator for endoscopic sinus surgery
doi 10.3389/fbioe.2022.974021
- 2,345 views
- 14 citations
- Frontiers in Medical Technology
- Regenerative Technologies
- Research Topics
- 3D Printing for Surgical Simulation and Training: Innovative Materials and Approaches
3D Printing for Surgical Simulation and Training: Innovative Materials and Approaches
5,309
Total downloads
22k
Total views and downloads
Submit your idea
Select the journal/section where you want your idea to be submitted:
Articles
ORIGINAL RESEARCH
Published on 16 Nov 2022
Augmented reality hologram combined with pre-bent distractor enhanced the accuracy of distraction vector transfer in maxillary distraction osteogenesis, a study based on 3D printed phantoms
doi 10.3389/fsurg.2022.1018030
- 1,776 views
- 3 citations
ORIGINAL RESEARCH
Published on 08 Nov 2022
Reconstruction of chronic radiation-induced ulcers in the chest wall using free and pedicle flaps
doi 10.3389/fsurg.2022.1010990
- 1,275 views
- 3 citations
METHODS
Published on 22 Sep 2022
A three-dimensional visualization of the full-field surgical region based on thin-slice MRI: A helpful approach for simultaneously guiding tumor resection and perforator flap elevation
doi 10.3389/fsurg.2022.984892
- 817 views
- 4 citations
SYSTEMATIC REVIEW
Published on 20 Jul 2022
Simulation models for learning local skin flap design and execution: A systematic review of the literature
doi 10.3389/fsurg.2022.918912
- 2,713 views
- 1 citation
ORIGINAL RESEARCH
Published on 09 Jun 2022
Innovative Application of Three-Dimensional-Printed Breast Model-Aided Reduction Mammaplasty
doi 10.3389/fsurg.2022.890177
- 2,024 views
- 1 citation
ORIGINAL RESEARCH
Published on 22 Mar 2022
The Application of Three-Dimensional Technologies in the Improvement of Orthopedic Surgery Training and Medical Education Quality: A Comparative Bibliometrics Analysis
doi 10.3389/fbioe.2022.852608
- 2,324 views
- 5 citations
ORIGINAL RESEARCH
Published on 17 Feb 2022
Additive Manufacturing of a Miniature Functional Trocar for Eye Surgery
doi 10.3389/fmedt.2022.842958
- 3,206 views
- 2 citations
ORIGINAL RESEARCH
Published on 10 Dec 2021
Factors Associated with Energy Efficiency of Focused Ultrasound Through the Skull: A Study of 3D-Printed Skull Phantoms and Its Comparison with Clinical Experiences
doi 10.3389/fbioe.2021.783048
- 2,123 views
- 4 citations
Published in
Frontiers in Medical Technology
- Regenerative Technologies
- Diagnostic and Therapeutic Devices
- Bionics and BiomimeticsOffline
Participating Journals
Frontiers in Bioengineering and Biotechnology
Bionics and BiomimeticsOffline
- 4.3 impact factor
- 8.3 citescore
Frontiers in Robotics and AI
Bionics and BiomimeticsOffline
- 2.9 impact factor
- 6.5 citescore
Frontiers in Surgery
- 1.6 impact factor
- 1.9 citescore
Impact
- 22kTopic views
- 15kArticle views
- 5,309Article downloads