Skip to main content

ERRATUM article

Front. Mater., 13 December 2024
Sec. Computational Materials Science

Erratum: Prediction and analysis of strength and economic feasibility of filling materials under the influence of mix proportion and curing age

  • Frontiers Media SA, Lausanne, Switzerland

Due to a production error, there was a mistake in Figure 1 as published. The corrected Figure 1 appears below.

Figure 1
www.frontiersin.org

Figure 1. Technical route.

The publisher apologizes for this mistake.

The original version of this article has been updated.

Keywords: curing age, MLP, LSTM, strength, prediction, economic analysis

Citation: Frontiers Production Office (2024) Erratum: Prediction and analysis of strength and economic feasibility of filling materials under the influence of mix proportion and curing age. Front. Mater. 11:1532906. doi: 10.3389/fmats.2024.1532906

Received: 22 November 2024; Accepted: 22 November 2024;
Published: 13 December 2024.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2024 Frontiers Production Office. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Frontiers Production Office, cHJvZHVjdGlvbi5vZmZpY2VAZnJvbnRpZXJzaW4ub3Jn

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.