Skip to main content

CORRECTION article

Front. Mater., 05 July 2024
Sec. Colloidal Materials and Interfaces

Corrigendum: Fabrication, properties and biological activity of a titanium surface modified with zinc via plasma electrolytic oxidation

Rui Luo&#x;Rui Luo1Yang Jiao&#x;Yang Jiao2Sujiajun ZhangSujiajun Zhang3Jieshi WuJieshi Wu3Xingling WuXingling Wu1Kaihang LuKaihang Lu1Pengpeng ZhangPengpeng Zhang1Yankun LiYankun Li1Xiaohui NiXiaohui Ni4Quanming Zhao
Quanming Zhao4*
  • 1Department of Orthopedics, Guizhou Provincial People’s Hospital, Guiyang, Guizhou, China
  • 2Department of Stomatology, The Seventh Medical Center of PLA General Hospital, Beijing, China
  • 3Department of Orthopaedics, Affiliated Hospital of Jiangnan University, Wuxi, Jiangsu, China
  • 4Department of Orthopedics, Dafeng People’s Hospital, Yancheng, Jiangsu, China

A Corrigendum on:
Fabrication, properties and biological activity of a titanium surface modified with zinc via plasma electrolytic oxidation

by Luo R, Jiao Y, Zhang S, Wu J, Wu X, Lu K, Zhang P, Li Y, Ni X and Zhao Q (2023). Front. Mater. 10:1202110. doi: 10.3389/fmats.2023.1202110

In the published article, there was an error in Quanming Zhao’s affiliation. Instead of “1 Department of Orthopedics, Guizhou Provincial People’s Hospital, Guiyang, Guizhou, China”, it should be “4 Department of Orthopedics, Dafeng People’s Hospital, Yancheng, Jiangsu, China”.

There was also an error in the Funding statement. The following incorrect funding number were included: Guizhou Provincial Science and Technology Projects (ZK [2022] general 267) and Guiyang Science and Technology Plan Project [grant number (2023) 48-23]. The correct Funding statement appears below.

Funding

This work was supported by the Key Research and Development (Key R and D) plan of Jiangsu Province—social development (BE2021683), National Science Foundation of China (82160415), Guizhou Province Excellent Young Science and Technology Talents Project (YQK[2023] 022) and Guizhou Provincial Science and Technology Projects (ZK [2024] general 475), and Guizhou Provincial People’s Hospital fund [grant numbers GZSYBS (2022) 01].

The authors apologize for these errors and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Keywords: plasma electrolytic oxidation, titanium, surface properties, zinc-doped porous coating, biological activity

Citation: Luo R, Jiao Y, Zhang S, Wu J, Wu X, Lu K, Zhang P, Li Y, Ni X and Zhao Q (2024) Corrigendum: Fabrication, properties and biological activity of a titanium surface modified with zinc via plasma electrolytic oxidation. Front. Mater. 11:1446070. doi: 10.3389/fmats.2024.1446070

Received: 08 June 2024; Accepted: 10 June 2024;
Published: 05 July 2024.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2024 Luo, Jiao, Zhang, Wu, Wu, Lu, Zhang, Li, Ni and Zhao. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Quanming Zhao, doctor8583@163.com

These authors have contributed equally to this work and share first authorship

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.