Skip to main content

CORRECTION article

Front. Mater., 11 January 2023
Sec. Carbon-Based Materials

Corrigendum: Nanostructured carbon electrocatalysts for clean energy conversion and storage: A mini review on the structural impact

Mengqing Yang,Mengqing Yang1,2Mengjie Wang,Mengjie Wang1,2Minna ZhangMinna Zhang3Xun Sun,Xun Sun1,2Xiaoxu Xuan,,
Xiaoxu Xuan1,2,4*
  • 1Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, Jinan, China
  • 2National Demonstration Center for Experimental Mechanical Engineering Education, Shandong University, Jinan, China
  • 3Shandong Key Laboratory for Special Silicon-containing Material, Advanced Materials Institute, Qilu University of Technology (Shandong Academy of Sciences), Jinan, China
  • 4Suzhou Research Institute of Shandong University, Suzhou, China

A Corrigendum on
Nanostructured carbon electrocatalysts for clean energy conversion and storage: A mini review on the structural impact

by Yang M, Wang M, Zhang M, Sun X and Xuan X (2022). Front. Mater. 9:1090412. doi: 10.3389/fmats.2022.1090412

In the published article, there was an error in the article title. Instead of “Nanostructured carbon electrocatalysts for clean energy conversion and storage: A mini review on the structural impactA”, it should be “Nanostructured carbon electrocatalysts for clean energy conversion and storage: A mini review on the structural impact.

In the published article, there was an error. There is redundant punctuation in the sentences.

A correction has been made to Introduction, Paragraph 2. This sentence previously stated:

“Typical CDs, consisting of an sp2−/sp3 hybrid carbon core and an outer layer rich in hydroxyl (OH), carboxyl (COOH), and amine (NH2) functional groups, can be divided into graphene quantum dots (GQDs), carbon nanodots (CNDs), carbon quantum dots (CQDs), and polymer dots (PDs) according to structure”

The corrected sentence appears below:

“Typical CDs, consisting of an sp2/sp3 hybrid carbon core and an outer layer rich in hydroxyl (OH), carboxyl (COOH), and amine (NH2) functional groups, can be divided into graphene quantum dots (GQDs), carbon nanodots (CNDs), carbon quantum dots (CQDs), and polymer dots (PDs) according to structure”

The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Keywords: carbon nanomaterials, electrochemical, water splitting, ORR, CO2RR, NRR

Citation: Yang M, Wang M, Zhang M, Sun X and Xuan X (2023) Corrigendum: Nanostructured carbon electrocatalysts for clean energy conversion and storage: A mini review on the structural impact. Front. Mater. 9:1131651. doi: 10.3389/fmats.2022.1131651

Received: 25 December 2022; Accepted: 30 December 2022;
Published: 11 January 2023.

Edited and reviewed by:

Zaka Ullah, University of Education, Pakistan

Copyright © 2023 Yang, Wang, Zhang, Sun and Xuan. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Xiaoxu Xuan, xiaoxuxuan@sdu.edu.cn

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.