Skip to main content

ERRATUM article

Front. Robot. AI, 13 June 2023
Sec. Robotic Control Systems

Erratum: Flexible sensor concept and an integrated collision sensing for efficient human-robot collaboration using 3D local global sensors

Frontiers Production Office
Frontiers Production Office*
  • Frontiers Media SA, Lausanne, Switzerland

An Erratum on
Flexible sensor concept and an integrated collision sensing for efficient human-robot collaboration using 3D local global sensors

by Rashid A, Alnaser I, Bdiwi M and Ihlenfeldt S (2023). Front. Robot. AI 10:1028411. doi: 10.3389/frobt.2023.1028411

Due to a production error, there was an error in the figures as published. The correct Figures 29, Figures 11, 12 appear below.

The article title was revised to read “Flexible sensor concept and an integrated collision sensing for efficient human-robot collaboration using 3D local global sensors”.

The publisher apologizes for these mistakes. The original version of this article has been updated.

FIGURE 2
www.frontiersin.org

FIGURE 2. Proposed flexible and efficient sensor system.

FIGURE 3
www.frontiersin.org

FIGURE 3. Simplified co-existence cell.

FIGURE 4
www.frontiersin.org

FIGURE 4. Different types of occlusions.

FIGURE 5
www.frontiersin.org

FIGURE 5. LiDAR sensor concept.

FIGURE 6
www.frontiersin.org

FIGURE 6. Constrained occlusion with sensor at middle of fence.

FIGURE 7
www.frontiersin.org

FIGURE 7. Constrained occlusion with sensor at the entrance.

FIGURE 8
www.frontiersin.org

FIGURE 8. Data Capturing experiment for safety parameter estimation.

FIGURE 9
www.frontiersin.org

FIGURE 9. Complete trajectory for collision sensing and stop trigger for a single iteration.

FIGURE 11
www.frontiersin.org

FIGURE 11. Box plot on multiple iterations at multiple robot velocities.

FIGURE 12
www.frontiersin.org

FIGURE 12. Safety distance and robot velocity for local (co-moving) and global collision sensing.

Keywords: collision avoidance, human–robot collaboration, intrusion distance, sensor concept, distance sensors

Citation: Frontiers Production Office (2023) Erratum: Flexible sensor concept and an integrated collision sensing for efficient human-robot collaboration using 3D local global sensors. Front. Robot. AI 10:1228130. doi: 10.3389/frobt.2023.1228130

Received: 24 May 2023; Accepted: 24 May 2023;
Published: 13 June 2023.

Approved by

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2023 Frontiers Production Office. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Frontiers Production Office, production.office@frontiersin.org

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.