Skip to main content

ERRATUM article

Front. Microbiol., 04 April 2023
Sec. Fungi and Their Interactions
Volume 14 - 2023 | https://doi.org/10.3389/fmicb.2023.1193234

Erratum: A 3D printed device for easy and reliable quantification of fungal chemotropic growth

This article is an erratum on:

  1. A 3D Printed Device for Easy and Reliable Quantification of Fungal Chemotropic Growth

    1. Read original article
\n Frontiers Production Office Frontiers Production Office*
  • Frontiers Media SA, Lausanne, Switzerland

An Erratum on
A 3D printed device for easy and reliable quantification of fungal chemotropic growth

by Schunke, C., Pöggeler, S., and Nordzieke, D. E. (2020). Front. Microbiol. 11:584525. doi: 10.3389/fmicb.2020.584525

Due to a production error, in the Methods section, sub-section “Evaluation of Directed Growth Patterns,” the equations were incorrectly displayed. The correct equations are given below.

chemotropic index [%]=({(number of attracted fungal tipssum of all fungal tips)*100}-50)*2
chemotropic rate [%]=(number of attracted fungal tipssum of all fungal tips)*100

The publisher apologizes for this mistake. The original article has been updated.

Keywords: chemotropism, 3D printed device, glucose, Colletotrichum graminicola, filamentous fungi

Citation: Frontiers Production Office (2023) Erratum: A 3D printed device for easy and reliable quantification of fungal chemotropic growth. Front. Microbiol. 14:1193234. doi: 10.3389/fmicb.2023.1193234

Received: 24 March 2023; Accepted: 24 March 2023;
Published: 04 April 2023.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2023 Frontiers Production Office. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Frontiers Production Office, production.office@frontiersin.org

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.