This article is a correction to:
Lithology-Based 3D Modeling of Urban Geological Attributes and Their Engineering Application: A Case Study of Guang’an City, SW China
Fang Zhou
Minghui Li1*- 1Department of Geological Information, Chengdu Center, China Geological Survey, Chengdu, China
- 2Department of Fundamental Geological, Natural Resources Aerial Geophysical and Remote Sensing Center of China Geological Survey, Beijing, China
- 3Department of Geological Information, Research Center of Applied Geology of China Geological Survey, Chengdu, China
A Corrigendum on
Lithology- based 3D modeling of urban geological attributes and their engineering application: A case study of Guang’an city, SW China
by Zhou F, Li M, Huang C, Liang H, Liu Y, Zhang J, Wang B and Hao M (2022). Front. Earth Sci. 10:918285. doi: 10.3389/feart.2022.918285
In the published article, there were several errors in the captions for Figures 2–6. The correct captions appear below:
“FIGURE 2 | Semi-variogram model of sand.”
“FIGURE 3 | Workflow of 3D geological modeling.”
“FIGURE 4 | Simplified geological map of study area.”
“FIGURE 5 | Geotechnical units classification of Shaximiao formation (J2s) in study area.”
“FIGURE 6 | 3D geological model of Guang’an city (A) and fences diagram (B).”
The authors apologize for these errors and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.
Publisher’s note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Keywords: urban geological modeling, urban underground space, sequential simulation interpolation, geotechnical attribute model, Guang’an city
Citation: Zhou F, Li M, Huang C, Liang H, Liu Y, Zhang J, Wang B and Hao M (2022) Corrigendum: Lithology-based 3D modeling of urban geological attributes and their engineering application: A case study of Guang’an city, SW China. Front. Earth Sci. 10:1010503. doi: 10.3389/feart.2022.1010503
Received: 03 August 2022; Accepted: 04 August 2022;
Published: 05 September 2022.
Approved by:
Frontiers Editorial Office, Frontiers Media SA, SwitzerlandCopyright © 2022 Zhou, Li, Huang, Liang, Liu, Zhang, Wang and Hao. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Fang Zhou, 791630163@qq.com; Minghui Li, Lmh680408@163.com