Kai Yan- Guangdong Provincial Key Laboratory of Environmental Pollution and Remediation Technology, School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou, China
Editorial on the Research Topic
Biomass Resources Utilization
Biomass utilization is one of the pivotal loops in many biorefinery schemes for the production of value-added chemicals and biofuels (Huber et al., 2006; Alonso et al., 2012; Hu et al., 2021). The effective utilization of biomass resources including the understanding of complex structures and mild fractionation into individual components is a profound challenge for the development of biorefinery (Climent et al., 2010; Hu et al., 2019; Abu-Omar et al., 2020). Challenges are often associated with secondary pollution in the pretreatment as well as the utilization process, whereas harsh reaction conditions, low product selectivity, and poor catalyst stability are also major headaches (Climent et al., 2014; Liu et al., 2021a; Yan et al., 2021). Developing a green and efficient catalytic system to improve conversion efficiency and reduce environmental pollution is crucial (Akhtar and Amin 2011; Alonso et al., 2013; Wang et al., 2019; Yi et al., 2019; Liu et al., 2021b). Moreover, using a biorefinery approach to achieve the integration of the process of biomass conversion with the production of biofuels and chemicals is more practical (Gallezot 2012; Huang et al., 2020; Li et al., 2021; Li et al., 2022a; Li et al., 2022b). This special issue mainly focuses on the pretreatment of biomass, conversion of biomass waste or biomass-based sources or platform chemicals to value-added products and biofuels, highly valued materials in various environmental remediation.
Biomass Pretreatment
Dong et al. firstly used a two-step pretreatment process to increase the digestibility of Brewer’s spent grains (BSG), high-fiber meal (HFM), and dry distillers grains and solubles (DDGS). BSG, HFM, and DDGS were treated with alkali at 100°C for breaking the ester linkages, followed by an ammonia fiber expansion (AFEX) process. The effect of the alkali amount was investigated, and the use of 4% alkali was favorable to de-esterify biomass. It was of greater importance that the content of carboxamide was similar to the untreated biomass, which was 0.04 mg/g. In addition, the two-step pretreatment process enhanced the glucan conversion. It provided a feasible idea for the treatment of industrial lignocellulosic biomass byproducts.
Tan et al. reviewed various methods (chemical, physical, biological, and combined treatments) for the pretreatment of straw biomass for fermentable sugars production. They evaluated each treatment method in detail, and their advantages and disadvantages were given. Chemical pretreatment was economic but harmful to the environment. Biological pretreatment was environmentally benign but the process was too long. The combined treatments were more efficient than the single method due to synergies. They suggested that the future pretreatments should focus on the following traits: 1) strengthening the basic research on the structure of lignocellulosic biomass at the molecular level, 2) Identifying and analyzing the unknown inhibitory components in the biomass for decreasing the pretreatment cost, 3) using computational tools to optimize the pretreatment process, 4) exploring the novel treatment approaches to improving the conversion of lignocellulosic biomass, 5) investigating the reaction mechanism of emerging methods for the treatment of biomass.
Bio-Oil Production
Zhao et al. reported that phenol-rich bio-oil was selectively generated by the thermal pyrolysis of corn straw in a homemade microwave. A measure of 46.7 wt% bio-oils was selectively produced and the experimental results confirmed temperature versus heating rate had deciding effects on the selectivity of phenolic oil with the optimal selectivity of 49.4 area%. Photocatalysis was an environmentally friendly and energy-saving biodiesel production method. Huang et al. reviewed the latest progress in photocatalytic biodiesel production from three aspects: transesterification mechanism, photocatalytic type, and modification strategy. At the same time, some problems in the production of biodiesel by the photocatalytic method are highlighted. For example, the mechanism of photocatalytic (trans) esterification had not been systematically studied, and photocatalysts usually contain expensive precious metals. Overall, photocatalytic biodiesel production is still in its infancy, but opens a new door for green biofuel production.
Value-Added Chemicals
A variety of biomass-derived chemicals (e.g., furfural, 5-hydroxymethyfurfural (HMF), levulinic acid (LA)) can be selectively produced from biomass and further upgraded into highly value-added furfuryl alcohol (FOL), γ-valerolactone (GVL) and 2,5—dimethylfuran (DMF). Gao et al. prepared a bimetallic PtNi/SBA-15 catalyst for the hydrogenation of furfural and HMF by a two-step method. After calcination at 500°C in air, PtNi/SBA-15 was obtained without reduction, achieving 77.9% FOL yield and 81.9% DHMF yield. The electron-rich Ptδ− species on PtNi/SBA-15 not only favored the adsorption and activation of the carbonyls in FF/HMF but also promotes the activation of the hydrogen molecule, which was of great significance for the upgrading and transformation of aldehydes. Hu et al. developed a post-synthetic strategy to synthesize ZrY for the efficient hydrogenation of LA into fine chemical GVL, whereas over 95% yield of GVL was obtained. The parameters of acidity and the metal-support interaction were the deciding factors in the production of GVL.
Environmental Application
Liu et al. successfully recovered Ni from laterite ore efficiently by H2 reduction with sodium thiosulfate (Na2S2O3). They found that the use of 20 wt% Na2S2O3 could efficiently recover Ni from laterite ore, achieving a Ni content of 9.97% and a Ni recovery of 99.24% at 1,100°C. They investigated the effects of reaction conditions (temperature, reduction time, and Na2S2O3) on the nickel laterite reduction, and the mechanism of Na2S2O3 in promoting the reduction of laterite ore by H2 was concluded.
In the process of removing antibiotics in wastewater treatment, many factors affect the adsorption efficiency of biochar (Chen et al., 2021; Li et al., 2021). Sun et al. proved that coconut shell biochar after KOH activation and FeCl3 magnetization had a strong removal effect on sulfonamide antibiotics (SA). The maximum adsorption capacities for sulfadiazine, sulfamethazine, and sulfamethoxazole were 294.12, 400.00, and 454.55 mg g−1, respectively, five to seven times higher than those achieved with raw biochar. They found that the SAs were adsorbed on the modified biochar via hydrogen bonds between SA molecules and -OH/-COOH groups in the biochar. Mechanistic analysis showed that π+-π EDA, CAHB, electrostatic, and Lewis acid-base interactions may be the main reasons for adsorption of SAs on 50MBC-KOH2.5. It provides a new way to utilize biochar for wastewater treatment.
Author Contributions
The work is written by KY.
Conflict of Interest
The author declares that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
Publisher’s Note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Acknowledgments
The Topic Editors especially thank all authors in this special issue. The author acknowledges the support from Guangdong Basic and Applied Basic Research Foundation (2019B1515120058), the Scientific and Technological Planning Project of Guangzhou (202206010145), Key-Area Research and Development Program of Guangdong Province (2019B110209003), National Natural Science Foundation of China (22078374), and the National Ten Thousand Talent Plan.
References
Abu-Omar, M. M., Barta, K., Beckham, G. T., Luterbacher, J., Ralph, J., Rinaldi, R., et al. (2020). Guidelines for Performing Lignin-First Biorefining. Energy Environ. Sci. 14, 262–292. doi:10.1039/D0EE02870C
Akhtar, J., and Amin, N. A. S. (2011). A Review on Process Conditions for Optimum Bio-Oil Yield in Hydrothermal Liquefaction of Biomass. Renew. Sustain. Energy Rev. 15, 1615–1624. doi:10.1016/j.rser.2010.11.054
Alonso, D. M., Wettstein, S. G., and Dumesic, J. A. (2012). Bimetallic Catalysts for Upgrading of Biomass to Fuels and Chemicals. Chem. Soc. Rev. 41, 8075–8098. doi:10.1039/c2cs35188a
Alonso, D. M., Wettstein, S. G., Mellmer, M. A., Gurbuz, E. I., and Dumesic, J. A. (2013). Integrated Conversion of Hemicellulose and Cellulose from Lignocellulosic Biomass. Energy Environ. Sci. 6, 76–80. doi:10.1039/c2ee23617f
Chen, Z., Zhang, M., Wang, Y., Yang, Z., Hu, D., Tang, Y., et al. (2021). Controllable Synthesis of Nitrogen-Doped Porous Carbon from Metal-Polluted Miscanthus Waste Boosting for Supercapacitors. Green Energy Environ. 6, 929–937. doi:10.1016/j.gee.2020.07.015
Climent, M. J., Corma, A., De Frutos, P., Iborra, S., Noy, M., Velty, A., et al. (2010). Chemicals from Biomass: Synthesis of Glycerol Carbonate by Transesterification and Carbonylation with Urea with Hydrotalcite Catalysts. The Role of Acid-Base Pairs. J. Catal. 275, 236–242. doi:10.1016/j.jcat.2009.11.001
Climent, M. J., Corma, A., and Iborra, S. (2014). Conversion of Biomass Platform Molecules into Fuel Additives and Liquid Hydrocarbon Fuels. Green Chem. 16, 516–547. doi:10.1039/c3gc41492b
Gallezot, P. (2012). Conversion of Biomass to Selected Chemical Products. Chem. Soc. Rev. 41, 1538–1558. doi:10.1039/c1cs15147a
Hu, D., Xu, H., Yi, Z., Chen, Z., Ye, C., Wu, Z., et al. (2019). Green CO2-assisted Synthesis of Mono- and Bimetallic Pd/Pt Nanoparticles on Porous Carbon Fabricated from Sorghum for Highly Selective Hydrogenation of Furfural. ACS Sustain. Chem. Eng. 7, 15339–15345. doi:10.1021/acssuschemeng.9b02665
Hu, D., Zhang, M., Xu, H., Wang, Y., and Yan, K. (2021). Recent Advance on the Catalytic System for Efficient Production of Biomass-Derived 5-hydroxymethylfurfural. Renew. Sustain. Energy Rev. 147, 111253. doi:10.1016/j.rser.2021.111253
Huang, H., Yu, C., Han, X., Huang, H., Wei, Q., Guo, W., et al. (2020). Ni, Co Hydroxide Triggers Electrocatalytic Production of High-Purity Benzoic Acid over 400 mA Cm−2. Energy Environ. Sci. 13, 4990–4999. doi:10.1039/d0ee02607g
Huber, G. W., Iborra, S., and Corma, A. (2006). Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and Engineering. Chem. Rev. 106, 4044–4098. doi:10.1021/cr068360d
Li, R., Xiang, K., Peng, Z., Zou, Y., and Wang, S. (2021). Recent Advances on Electrolysis for Simultaneous Generation of Valuable Chemicals at Both Anode and Cathode. Adv. Energy Mater. 11, 2102292. doi:10.1002/aenm.202102292
Li, X., Hu, K., Huang, Y., Gu, Q., Chen, Y., Yang, B., et al. (2022a). Upcycling Biomass Waste into Fe Single Atom Catalysts for Pollutant Control. J. Energy Chem. 69, 282–291. doi:10.1016/j.jechem.2022.01.044
Li, X., Yang, Z., Wu, G., Huang, Y., Zheng, Z., Garces, H. F., et al. (2022b). Fabrication of Ultrathin Lily-like NiCo2O4 Nanosheets via Mooring NiCo Bimetallic Oxide on Waste Biomass-Derived Carbon for Highly Efficient Removal of Phenolic Pollutants. Chem. Eng. J. 441, 136066. doi:10.1016/j.cej.2022.136066
Liu, B., Xu, S., Zhang, M., Li, X., Decarolis, D., Liu, Y., et al. (2021a). Electrochemical Upgrading of Biomass-Derived 5-hydroxymethylfurfural and Furfural over Oxygen Vacancy-Rich NiCoMn-Layered Double Hydroxides Nanosheets. Green Chem. 23, 4034–4043. doi:10.1039/d1gc00901j
Liu, B., Zhang, M., Liu, Y., Wang, Y., and Yan, K. (2021b). Electrodeposited 3D Hierarchical NiFe Microflowers Assembled from Nanosheets Robust for the Selective Electrooxidation of Furfuryl Alcohol. Green Energy Environ. doi:10.1016/j.gee.2021.11.008
Wang, A., Zheng, Z., Li, R., Hu, D., Lu, Y., Luo, H., et al. (2019). Biomass-Derived Porous Carbon Highly Efficient for Removal of Pb(II) and Cd(II). Green Energy & Environ. 4, 414–423. doi:10.1016/j.gee.2019.05.002
Yan, K., Li, R., Yang, Z., Li, X., Wang, Y., and Wu, G. (2021). Biomass Waste-Derived Porous Carbon Efficient for Simultaneous Removal of Chlortetracycline and Hexavalent Chromium. iScience 24, 102421. doi:10.1016/j.isci.2021.102421
Keywords: pretreatment, bio-oil, value-added chemicals, utilization, catalysis
Citation: Yan K (2022) Editorial: Biomass Resources Utilization. Front. Chem. 10:948565. doi: 10.3389/fchem.2022.948565
Received: 20 May 2022; Accepted: 23 May 2022;
Published: 28 June 2022.
Edited and reviewed by:
Sabarathinam Shanmugam, Estonian University of Life Sciences, EstoniaCopyright © 2022 Yan. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Kai Yan, eWFuazlAbWFpbC5zeXN1LmVkdS5jbg==