Evolutionary computation-based machine learning and its applications for multi-robot systems

Communication infrastructure is damaged by disasters and it is difficult to support communication services in affected areas. UAVs play an important role in the emergency communication system. Due to the limited airborne energy of a UAV, it is a critical technical issue to effectively design flight routes to complete rescue missions. We fully consider the distribution of the rescue area, the type of mission, and the flight characteristics of the UAV. Firstly, according to the distribution of the crowd, the PSO algorithm is used to cluster the target-POI of the task area, and the neural collaborative filtering algorithm is used to prioritize the target-POI. Then we also design a Trans-UTPA algorithm. Based on MAPPO 's policy network and value function, we introduce transformer model to make Trans-UTPA's policy learning have no action space limitation and can be multi-task parallel, which improves the efficiency and generalization of sample processing. In a three-dimensional space, the UAV selects the emergency task to be performed (data acquisition and networking communication) based on strategic learning of state information (location information, energy consumption information, etc.) and action information (horizontal flight, ascent, and descent), and then designs the UAV flight path based on the maximization of the global value function. The experimental results show that the performance of the Trans-UTPA algorithm is further improved compared with the USCTP algorithm in terms of the success rate of each UAV reaching the target position, the number of collisions, and the average reward of the algorithm. Among them, the average reward of the algorithm exceeds the USCTP algorithm by 13%, and the number of collisions is reduced by 60%. Compared with the heuristic algorithm, it can cover more target-POIs, and has less energy consumption than the heuristic algorithm.

Cable-driven continuum robots (CDCRs) can flexibly travel through narrow space for complex workspace tasks. However, it is challenging to design the trajectory tracking algorithm for CDCRs due to their nonlinear dynamic behaviors and cable hysteresis characteristics. In this contribution, a model predictive control (MPC) tracking algorithm based on quantum particle swarm optimization (QPSO) is designed for CDCRs to realize effective trajectory tracking under constraints. In order to make kinematic analysis of a CDCR, the forward and inverse mapping among actuation space, joint space and work space is analyzed by using the piecewise constant curvature method and the homogeneous coordinate transformation. To improve the performance of conventional MPC for complex tracking tasks, QPSO is adopted in the rolling optimization of MPC for its global optimization performance, robustness and fast convergence. Both simulation and operational experiment results demonstrate that the designed QPSO-MPC presents high control stability and trajectory tracking precision. Compared with MPC and particle swarm optimization (PSO) based MPC, the tracking error of QPSO-MPC is reduced by at least 43 and 24%, respectively.