Perovskite and Organic Materials for Radiation Detectors

Perovskite-based X-ray detector, which is widely applied in fields of scientific research and medical diagnosis, has drawn much attention for its superior optoelectrical properties. To improve the detection performance, band engineering is becoming the hot topic for perovskite properties modulation. In this article, we review the recent progress of perovskite-based X-ray detectors with band engineering process from three aspects, which are background introduction, band theory of heterojunction devices, and optimized electrode contact devices. Lastly, research status and strategies are summarized and perspectives of future progress are analyzed. We hope this review can provide constructive instructions and suggestions for future development of band engineering for perovskite-based high-performance X-ray detector.

Introduction: This paper deals with the class of versatile semiconducting materials called perovskites, which have been deposited for the first time on flexible substrates and then tested for radiation detection monitoring applications.

Methods: Lead halide inorganic perovskite, CsPbCl₃, 0.4–1 μm-thick films have been grown on plastic flexible substrates equipped with interdigitated electrodes (IDEs) by magnetron sputtering at room temperature.

Results: First measurements in realtime configuration are reported for a 1–µm thick prototype under proton beams with energy in the range 100–228 MeV and 1–10 nA extraction currents, of interest for protontherapy applications.

Discussion: Experimental results evidence good performances of our sample as a real-time monitoring device. Current stability under UV and proton beam exposure has been tested in the range 0.1–120 s, as well as reproducibility under multiple exposures. The measured current signal proved to be linearly dependent on the extraction currents at a given proton energy. Linearity of the current signal of the device with proton fluxes was also proved within two order of magnitude range, about 10⁷–10⁹ p/s. These promising results, when coupled with easyness of fabrication, low processing costs and high versatility of electrode configurations, all features characterizing the manufacturing process, put into evidence lead halide perovskites as promising candidates for real-time radiation detection in protontherapy.