AUTHOR=Hägglund Carl TITLE=Multiscale Optical Modeling of Perovskite-Si Tandem Solar Cells JOURNAL=Frontiers in Photonics VOLUME=3 YEAR=2022 URL=https://www.frontiersin.org/journals/photonics/articles/10.3389/fphot.2022.921438 DOI=10.3389/fphot.2022.921438 ISSN=2673-6853 ABSTRACT=

With the success of silicon (Si) solar cell technology, research and development on higher efficiency multijunction solar cells is gaining much attention. Tandem cells with a perovskite top cell and a Si bottom cell show particular potential. However, the optical modeling of such devices is complicated by the broad range of length scales involved; the optically thin layers and nanoscale features of a perovskite solar cell require some version of wave optics or even full field electromagnetic (EM) calculations, while the micrometer scale structuring and large dimensions of Si cells are much more manageable using geometrical (ray) optics. In the present work, a method for combining EM and ray optical calculations is developed and described in detail, with examples provided in the software Comsol Multiphysics. For regions with thin films or nanoscale features, EM wave calculations are performed using the finite element method. These calculations provide the phase and amplitude of the waves diffracted into different orders, of which only the regular reflection and transmission are typically of relevance for nanoscale periodicity. In the ray optics simulation, the corresponding regions are implemented as diffracting interfaces, with deterministic transformations of the Stokes vector components according to the EM wave calculations. Meanwhile, the absorbed intensity of intersecting rays is recorded. The method is applied to separate perovskite and Si solar cells and to a few tandem solar cells of relevance for two- versus four-terminal configurations. Corrections for strongly absorbing media in the ray tracing algorithm, which use generalized versions of the Fresnel coefficients, Snell’s law and the Beer-Lambert law, are also evaluated. In a typical Si solar cell with a front surface structure of inverted pyramids, such corrections are found to reduce the absorption by up to 0.5 percentage units compared to a conventional ray tracing calculation. The difference is concluded to originate mainly from reduced absorption rates of inhomogeneous waves, rather than from enhanced escape probabilities for (quasi-) trapped rays at the Si front surface. The method is further applied to evaluate the effects of a plasmonic nanoparticle array, embedded in a perovskite solar cell stack that is located directly on the microstructured Si surface.