AUTHOR=Gibb Fergus , Beswick John , Travis Karl TITLE=Borehole disposal of spent fuel and other high-level wastes: the case for deep, vertical, fully cased holes in saturated “hard” rock JOURNAL=Frontiers in Nuclear Engineering VOLUME=3 YEAR=2024 URL=https://www.frontiersin.org/journals/nuclear-engineering/articles/10.3389/fnuen.2024.1470443 DOI=10.3389/fnuen.2024.1470443 ISSN=2813-3412 ABSTRACT=

Driven by major advances in deep drilling technology and the geological understanding of the deep continental crust over the past 70 years, disposal in deep boreholes has moved from being technically unachievable to the point that it now offers a viable solution for the most hazardous nuclear wastes that could effectively be implemented “tomorrow”—i.e., within a few years. Moreover, disposal in deep boreholes is arguably superior in almost every respect to the mined and engineered repositories being pursued for high level waste by most countries. During the first 50 years of their evolution, almost all deep borehole disposal concepts shared five key aspects: (i) the hole was as deep as possible, (ii) it was vertical, (iii) it was fully cased, and (iv) it was in “hard” basement rock (v) saturated with aqueous fluid (groundwater). Technical advances in drilling over the last 20 years have encouraged proposed versions of the concept which depart from one or more of these aspects, but it is our contention that all five fundamental aspects should be retained. This paper summarises the more important arguments supporting this view. In order to meet the necessary post-closure (radiological) safety requirements, engineer out possible operational problems during construction and waste-package deployment, and capitalise on the main benefits of borehole disposal, the hole itself must be over 3 km deep, vertical, fully cased, and in suitably hard (ideally granitic) host rock saturated with aqueous fluid.