AUTHOR=Karasz Erin K. , Montoya Timothy D. , Taylor Jason M. , Ross Kenneth A. , Schaller Rebecca F. TITLE=Accelerated corrosion testing of cold spray coatings on 304L in chloride environments JOURNAL=Frontiers in Metals and Alloys VOLUME=1 YEAR=2022 URL=https://www.frontiersin.org/journals/metals-and-alloys/articles/10.3389/ftmal.2022.1021000 DOI=10.3389/ftmal.2022.1021000 ISSN=2813-2459 ABSTRACT=

Cold spray is an advanced metal manufacturing technique applied across many fields for a wide range of functions. Low heat input and compressive stresses induced into the substrate by the cold spray process makes it a promising choice for protective corrosion resistant coatings. One potential application for cold spray is as a protective coating against corrosion for spent nuclear fuel (SNF) interim dry storage canisters. As these canisters are currently stored at interim storage locations longer than originally intended, chloride induced stress corrosion cracking has been identified as a high priority knowledge gap, specifically with respect to prolonging or extending canister lifetimes (Teague et al., 2019). The high deployability of cold spray, for which nozzles have been developed for application in constrained spaces, in conjunction with beneficial properties inherent to cold spray makes this a good candidate for a corrosion protection coating on SNF canisters. This work explores a pathway to rapidly down-select cold spray coatings for canisters by focusing on the corrosion properties. Specifically, this study examines the corrosion protection abilities of nickel and nickel-based alloy cold spray coatings on 304 L stainless steel in chloride rich environments through electrochemical scans and ferric chloride pitting tests (ASTM G48 Method A). It was shown that the porosity of the coating, the processing gas, material selection, and deformation in the substrate all impact the corrosion behavior of cold spray coatings and are areas where optimization could reduce potential materials degradation, enabling enhanced coatings development.