AUTHOR=Ghahremani Arekhloo Negin , Wang Huxi , Parvizi Hossein , Tanwear Asfand , Zuo Siming , McKinlay Michael , Garcia Nuñez Carlos , Nazarpour Kianoush , Heidari Hadi TITLE=Motion artifact variability in biomagnetic wearable devices JOURNAL=Frontiers in Medical Technology VOLUME=6 YEAR=2024 URL=https://www.frontiersin.org/journals/medical-technology/articles/10.3389/fmedt.2024.1457535 DOI=10.3389/fmedt.2024.1457535 ISSN=2673-3129 ABSTRACT=
Motion artifacts can be a significant noise source in biomagnetic measurements when magnetic sensors are not separated from the signal source. In ambient environments, motion artifacts can be up to ten times stronger than the desired signals, varying with environmental conditions. This study evaluates the variability of these artifacts and the effectiveness of a gradiometer in reducing them in such settings. To achieve these objectives, we first measured the single channel output in varying magnetic field conditions to observe the effect of homogeneous and gradient background fields. Our analysis revealed that the variability in motion artifact within an ambient environment is primarily influenced by the gradient magnetic field rather than the homogeneous one. Subsequently, we configured a gradiometer in parallel and vertical alignment with the direction of vibration (X-axis). Our findings indicated that in a gradient background magnetic field ranging from 1 nT/mm to 10 nT/mm, the single-channel sensor output exhibited a change of 164.97 pT per mm unit increase, while the gradiometer output showed a change of only 0.75 pT/mm within the same range. Upon repositioning the gradiometer vertically (Y direction), perpendicular to the direction of vibration, the single-channel output slope increased to 196.85 pT, whereas the gradiometer output only increased by 1.06 pT/mm for the same range. Our findings highlight the influence of ambient environments on motion artifacts and demonstrate the potential of gradiometers to mitigate these effects. In the future, we plan to record biomagnetic signals both inside and outside the shielded room to compare the efficacy of different gradiometer designs under varying environmental conditions.