AUTHOR=Shanmugasundar G. , Vanitha M. , Logesh K. , Cepova Lenka , Elangovan Muniyandy TITLE=Effect of deposition temperature on the tribo-mechanical properties of nitrogen doped DLC thin film JOURNAL=Frontiers in Mechanical Engineering VOLUME=10 YEAR=2024 URL=https://www.frontiersin.org/journals/mechanical-engineering/articles/10.3389/fmech.2024.1365555 DOI=10.3389/fmech.2024.1365555 ISSN=2297-3079 ABSTRACT=

The tribomechanical characteristics of diamond-like carbon (DLC) coatings are notably superior to other hard coatings, making them highly desirable for industrial applications. This study focuses on the synthesis of nitrogen-doped DLC (N-DLC) films through chemical vapor deposition (CVD) methods, with an emphasis on varying the deposition temperature. Comprehensive characterization techniques such as atomic force microscopy (AFM), scanning electron microscopy (SEM), and nanoindentation were employed to investigate the morphological and mechanical attributes of these coatings. The thickness of the films, measured using a Dektak profilometer, demonstrated an increase from 1.9 to 2.8 µm as the deposition temperature rose. Nanoindentation testing revealed that the film deposited at 900°C exhibited the highest hardness (H) and modulus of elasticity (E), measuring 21.95 and 208.3 GPa, respectively. Conversely, the film deposited at 1,000°C showed the lowest values, with H and E at 14.23a and 141.9 GPa, respectively. The H/E ratio of the coatings initially rose from 0.096 to 0.106 as the deposition temperature increased from 800°C to 900°C. However, for deposition temperatures exceeding 900°C the H/E ratio began to decline.