
94% of researchers rate our articles as excellent or good
Learn more about the work of our research integrity team to safeguard the quality of each article we publish.
Find out more
CORRECTION article
Front. Mech. Eng., 01 December 2016
Sec. Indoor Environment
Volume 2 - 2016 | https://doi.org/10.3389/fmech.2016.00010
This article is a correction to:
A Review of the Energy Performance Gap and Its Underlying Causes in Non-Domestic Buildings
A corrigendum on
Reason for Corrigendum:
Correction 1: The original article is missing a co-author who contributed to this work, I apologize for this oversight. We would like to see him included after M. Dowson, as follows:
Chris van Dronkelaar1,2*, Mark Dowson2, E. Burman1, Catalina Spataru3, Dejan Mumovic1
1Institute for Environmental Design and Engineering, University College London, London, UK
2BuroHappold Engineering, London, UK
3Energy Institute, University College London, London, UK
Correction 2: Additionally his work has not been acknowledged in the paragraph “Classification of the gap.” In the original article, this section reads:
“These are the gap between compliance modeling and measured energy use, performance modeling and measured energy use and calibration and energy use with a longitudinal perspective:
1. Regulatory performance gap, comparing predictions from compliance modeling to measured energy use.
2. Static performance gap, comparing predictions from performance modeling to measured energy use.
3. Dynamic performance gap, utilizing calibrated predictions from performance modeling with measured energy use taking a longitudinal perspective to diagnose underlying issues and their impact on the performance gap.”
This should be:
“These are the gap between compliance modeling and measured energy use, performance modeling and measured energy use and calibration and energy use with a longitudinal perspective (Burman, 2016):
1. Regulatory performance gap, comparing predictions from compliance modeling to measured energy use.
2. Static performance gap, comparing predictions from performance modeling to measured energy use.
3. Dynamic performance gap, utilizing calibrated predictions from performance modeling with measured energy use taking a longitudinal perspective to diagnose underlying issues and their impact on the performance gap.”
Correction 3: His contribution to the article.
EB is CD’s academic supervisor during his doctoral studies and has reviewed the paper and provided feedback on the work, including direct insights from his own work.
Correction 4: Change of title as suggested by co-author, removing the word “regulatory,” new title:
A review of the energy performance gap and its underlying causes in non-domestic buildings.
The running title has been updated accordingly to: Review of the Performance Gap.
The original files of the article have been updated.
CD, the main author, is a doctoral researcher and is the main contributor to this review paper, having done the literature research and writing. MD is CD’s industrial supervisor during his doctoral studies and has reviewed the paper and provided feedback for initial revision. EB is CD’s academic supervisor during his doctoral studies and has reviewed the paper and provided feedback on the work, including direct insights from his own work. CS is CD’s secondary academic supervisor during his doctoral studies and has reviewed the paper and provided feedback for initial revision. DM is CD’s first academic supervisor during his doctoral studies and has reviewed the paper and provided feedback for initial revision; DM is an Associate Editor for the HVAC Journal.
The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
Keywords: energy performance gap, energy use in buildings, predictions, measurements, feedback, post-occupancy evaluation
Citation: van Dronkelaar C, Dowson M, Burman E, Spataru C and Mumovic D (2016) Corrigendum: A Review of the Energy Performance Gap and Its Underlying Causes in Non-Domestic Buildings. Front. Mech. Eng. 2:10. doi: 10.3389/fmech.2016.00010
Received: 27 October 2016; Accepted: 31 October 2016;
Published: 01 December 2016
Edited by:
Hasim Altan, University of Sharjah, United Arab EmiratesReviewed by:
Andrew John Wright, De Montfort University, UKCopyright: © 2016 van Dronkelaar, Dowson, Burman, Spataru and Mumovic. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Chris van Dronkelaar, Y2hyaXN2YW5kckBnbWFpbC5jb20=
Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Research integrity at Frontiers
Learn more about the work of our research integrity team to safeguard the quality of each article we publish.