Original Research
Accepted on 17 Sep 2025
Dynamic response of ultra-high performance concrete hollow beam under impact loading
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1684084
Type at least 3 characters
3,747 articles
Original Research
Accepted on 17 Sep 2025
The influence of scale effect on the deformation parameters of the Duncan-Chang E-μ model for coarse-grained soils: An experimental study
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1685690
Original Research
Published on 17 Sep 2025
Performances of SBS and Nano-TiO2 composite modified asphalt and mixture after repetitive aging and regeneration
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1657286
- 392 views
Original Research
Accepted on 16 Sep 2025
Conduct an Advanced Numerical Simulation Investigation on the Rutting Performance of Coal Liquefaction Residue Asphalt Mixture
in Carbon-Based Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1638678
Original Research
Accepted on 16 Sep 2025
Evaluation of Rock Burst Hazard in Fully Mechanized Mining Face and Separate Source Prevention and Control Technology
in Mechanics of Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1676801
Original Research
Accepted on 15 Sep 2025
Effect of Cavitation Inducers on Slurry Erosion Resistance of HVOF-Sprayed Stainless-Steel Coatings
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1671031
- 117 views
Original Research
Accepted on 15 Sep 2025
Prediction of compressive strength of high-performance concrete based on multiple machine learning models
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1698248
Original Research
Accepted on 15 Sep 2025
Assembly of vermiculite/SnO2 composite membranes with high ion selectivity for enhancing osmotic energy conversion performance
in Energy Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1648638
Original Research
Accepted on 15 Sep 2025
Pre-qualification of additively manufactured 316L stainless steel using Small Punch and Uniaxial Creep testing
in Environmental Degradation of Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1609564
Original Research
Published on 15 Sep 2025
A new criterion for peak shear strength of rock joints based on shear-direction-related morphology description
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1662066
- 422 views
Original Research
Accepted on 12 Sep 2025
Influence of Polarization Engineering in InₓAlᵧGaN₍₁₋ₓ₋ᵧ₎ Back-Barrier on AlGaN Coupled Channel MOS-HEMT with HfO₂ Gate Dielectric for Millimeter-Wave Application
in Semiconducting Materials and Devices
Frontiers in Materials
doi 10.3389/fmats.2025.1666203
- 209 views
Editorial
Published on 12 Sep 2025
Editorial: Asphalt pavement performance under complex service conditions
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1697740
- 1,194 views
Original Research
Published on 11 Sep 2025
Green-synthesized Mg-substituted PrFeO3 perovskites via waste-derived precursors for acetone gas sensing
in Colloidal Materials and Interfaces
Frontiers in Materials
doi 10.3389/fmats.2025.1655749
- 971 views
Original Research
Accepted on 10 Sep 2025
Sub-Severe Hail: The Missing Piece in Assessing Asphalt Shingle Risk in North America
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1603074
- 323 views
Original Research
Published on 10 Sep 2025
Integrated approaches to selection control, microstructural analysis, and reliability assessment for bare dies
in Semiconducting Materials and Devices
Frontiers in Materials
doi 10.3389/fmats.2025.1623918
- 622 views
Original Research
Published on 10 Sep 2025
Experimental and numerical analysis on frost heave cracking of prestressed high-strength concrete (PHC) pipe piles in cold regions
in Structural Materials
Frontiers in Materials
doi 10.3389/fmats.2025.1670409
- 843 views