Estimation of bed shear stress and settling velocity with inertial dissipation method of suspended sediment concentration in cohesive sediment environments
CORRECTION article
Corrigendum: Estimation of bed shear stress and settling velocity with inertial dissipation method of suspended sediment concentration in cohesive sediment environments
Provisionally accepted- 1 Inha University, Incheon, Republic of Korea
- 2 Key Laboratory of Marine Geology and Environment, Institute of Oceanology, Chinese Academy of Sciences (CAS), Qingdao, Shandong Province, China
Corrigendum on: Chang J, Lee G-h, Ajama OD and Li W (2024) Estimation of bed shear stress and settling velocity with inertial dissipation method of suspended sediment concentration in cohesive sediment environments. Front. Mar. Sci. 11:1475565. doi: 0.3389/fmars.2024.1475565 In the published article, there was an error in Figure 6 as published. An earlier version of Figure 6 was mistakenly included. The corrected Figure 6 and its caption appear below.The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.
Keywords: Bed shear stress, Settling velocity, Inertial dissipation method, Suspended sediment concentration, Cohesive sediment
Received: 09 Jan 2025; Accepted: 27 Jan 2025.
Copyright: © 2025 Chang, Lee, AJAMA and Li. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
* Correspondence:
Guan-hong Lee, Inha University, Incheon, 402-751, Republic of Korea
Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.