Skip to main content

ORIGINAL RESEARCH article

Front. Fuels
Sec. Biofuels
Volume 2 - 2024 | doi: 10.3389/ffuel.2024.1404052
This article is part of the Research Topic Women in Fuel Science and Technology View all 3 articles

A technology integration approach for optimising biohydrogen production from food waste

Provisionally accepted
  • 1 University of Leeds, Leeds, United Kingdom
  • 2 Olleco, Liverpool, United Kingdom

The final, formatted version of the article will be published soon.

    The present study proposes a novel approach of combined inoculum and food waste heat shock pretreatment for biohydrogen production through dark fermentation. It evaluates the effect of the heating duration (at 115 ̊C) and starting pH on the biohydrogen yield and system profiles in two stages, namely Exp1 and Exp2. Exp1 investigated the optimal heating duration and starting pH for a combined inoculum/food waste heat shock pretreatment. A 24-hour biohydrogen production test at four heating durations (15, 30, 45 and 60 minutes) was assayed at acidic and alkaline starting pH ranges (4, 5, 6 and 8, 9, 10). The optimal starting pH from these experiments across all four heating durations was pH 5. An optimal level was not reached for the assayed heating durations. Biohydrogen yield increased linearly from 37.4 to 63.8 mL/gVS, with an increase in heating duration from 15 to 60 minutes at pH 5. Therefore, additional tests were conducted at pH 5 for extended heating durations of 75 to 120 minutes. Biohydrogen yield was similar at 75, 90 and 105-minute heating durations in a range of 69.7 to 73.5 mL/gVS. Above 105 minutes of heating duration, the overall gas production starts to decline, making it the maximum allowable heating duration. In Exp2, a comparative analysis of the system profiles between the combined inoculum/food waste pretreatment (Test) and inoculum-only pretreatment (Control) was investigated using the optimal heating duration range (75 and 105 minutes) and starting pH of 5. The peak biohydrogen yield from the Control was achieved following a 75-minute heating duration (84.5 mL/gVS, 58.6%), while this was achieved following a 90-minute heating duration for the Test (81.3 mL/gVS, 53.3%). Higher volatile fatty acids fermentation and pH recovery were achieved in the Test in addition to potential economic savings compared to the Control. This is particularly important where anaerobic digestion is deployed for downstream effluent processing. Therefore, this innovative approach of combined food waste/inoculum heat shock pretreatment presents opportunities to integrate dark fermentation into existing anaerobic digestion systems as a step to scale up the dark fermentation technology from lab to real-life application.

    Keywords: dark fermentation, biohydrogen, Food waste, Inoculum pretreatment, pH, anaerobic digestion

    Received: 20 Mar 2024; Accepted: 07 Aug 2024.

    Copyright: © 2024 Okoro-Shekwaga and Wilmshurst. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

    * Correspondence: Cynthia K. Okoro-Shekwaga, University of Leeds, Leeds, United Kingdom

    Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.