AUTHOR=Cai Angzu , Zhang Haixia , Zhao Yawei , Wang Xiaojian , Wang Litao , Zhao Hui TITLE=Quantitative source apportionment of heavy metals in atmospheric deposition of a typical heavily polluted city in Northern China: Comparison of PMF and UNMIX JOURNAL=Frontiers in Environmental Science VOLUME=10 YEAR=2022 URL=https://www.frontiersin.org/journals/environmental-science/articles/10.3389/fenvs.2022.950288 DOI=10.3389/fenvs.2022.950288 ISSN=2296-665X ABSTRACT=

Receptor models are rarely utilized in atmospheric deposition but are often used to identify pollutant sources and quantify their contributions. This article focuses on the soil in atmospheric deposition in a typical polluted city. Atmospheric deposition has become an important route for exogenous heavy metals’ input into ecosystems. In this study, the heavy metals in atmospheric deposition were determined in three monitoring points arranged in Handan City. According to the functional area, fluxes, sources, and accumulation in the soil were explored. The sources of heavy metals were identified by PMF (positive matrix factorization) and UNMIX. The accumulation of heavy metals in the soil was predicted. The results showed that the deposition fluxes in industrial areas were higher than other functional areas. The mean concentrations of 8 heavy metals (Cd, Cr, Cu, Mn, Ni, Pb, Zn, and As) in the atmospheric deposition exceed their background values. PMF identified five major sources and UNMIX analyzed four sources. Similar source apportionment results were acquired via PMF and UNMIX, which were the combustion of fossil fuels, steel-smelting emission, road dust, and industrial sources. Steel-smelter emission was the highest source contributor. Therefore, combining these two models was the most effective approach, and more attention should be paid to mitigating the pollution caused by the industrial activities. The prediction indicated that the accumulation of heavy metals from atmospheric deposition to the soil would increase in 30 years, the growth rate of Cd increased significantly. The results of this study could provide reference in reduction of heavy metal pollution in atmospheric deposition.