AUTHOR=Qin Yifeng , Chen Mingshen , Liu Shuchang , Fang Yunqing , Li Xudong , Qiu Jiangpin TITLE=Runoff regulation and nitrogen and phosphorus removal performance of a bioretention substrate with HDTMA-modified zeolite JOURNAL=Frontiers in Environmental Science VOLUME=10 YEAR=2023 URL=https://www.frontiersin.org/journals/environmental-science/articles/10.3389/fenvs.2022.918259 DOI=10.3389/fenvs.2022.918259 ISSN=2296-665X ABSTRACT=

As a commonly used material in bioretention substrates, natural zeolite (NZ) provides decent adsorption capacity for cation pollutants and heavy metals, but limited ability to remove anion pollutants. Hexadecyltrimethylammonium bromide (HDTMA)-modified zeolite (MZ) was used as the bioretention substrate material. The performance of the media including runoff reduction, nitrate nitrogen (NO3-N) removal, ammonium nitrogen (NH4+-N) removal, and total phosphorus (TP) removal was assessed by the column experiment. The effects of different levels of modification, ratio of zeolite in the substrate, and rainfall intensity on media performance were investigated. The results indicate that HDTMA-modified zeolite significantly improves the NO3-N (up to 38.2 times of NZ) and TP (up to17.5 times of NZ) removal rate of media and slightly increases the NH4+-N (up to 1.5 times of NZ) purification performance of the substrate. Compared with the media with NZ, decline on both runoff volume reduction (maximum decline up to 32.9%) and flow rate reduction (maximum decline up to 29.9%) of the media with MZ were observed. Based on multiple regression analysis, quantitative relationship models between influencing factors and response variables were established (R2 > 0.793), the level of the effect of influencing factors on response variables was investigated, and the interactions between influencing factors were explored. The main effect analysis found that the degree of modification affects NO3-N and TP removal rate of the substrate the most, and when the amount of HDTMA molecules loaded on the zeolite surface exceeds 0.09meq/g, the modification can no longer improve NO3-N removal efficiency.