AUTHOR=Schroeder Richard , Fleige Heiner , Hoffmann Carsten , Vogel Hans Joerg , Horn Rainer TITLE=Mechanical Soil Database—Part I: Impact of Bulk Density and Organic Matter on Precompression Stress and Consequences for Saturated Hydraulic Conductivity JOURNAL=Frontiers in Environmental Science VOLUME=10 YEAR=2022 URL=https://www.frontiersin.org/journals/environmental-science/articles/10.3389/fenvs.2022.793625 DOI=10.3389/fenvs.2022.793625 ISSN=2296-665X ABSTRACT=

The mechanical strength of agricultural soils depends on many soil properties and functions. The database, “soil strength and consequences for sustainable land use and soil management SOILMECHDAT-Kiel”, originates from the “Horn Research Group” includes analyses of undisturbed soil samples taken from more than 460 profiles in and is developed in collaboration with BONARES, a funding initiative of the German Federal Ministry for Education and Research that focuses on the sustainable use of soils. For over 40 years, over 42 different authors recorded 59 physical and 29 chemical parameters for complete soil profiles. In order to the aim of the initial analyses of this data is to determine the influence of bulk density (BD) organic matter (OM) and time (year) on precompression stress (Pc) and saturated hydraulic conductivity (ks) as a function of Pc. Three main textural groups sand, loam, and silt for both topsoils and subsoils (SS) were studied. In loamy and silty subsoils BD and OM are not related to Pc (R2 = 0.17 and R2 = 0.25). OM and bulk density are more related to Pc in sandy soils (R2 0.55–0.59). The link between ks and Pc showed that sandy soils have a significantly higher Pc (>150 kPa) and conductivities did not change much. In loamy soils, with a Pc > 90 kPa, 50% of the ks fell below the critical value of 10 cm d−1. For silty soils, at a Pc of 60 kPa, 50% of the data fall below the critical value of ks. These findings suggest that the stability of loamy and silty soils not only depends on OM and BD, but requires further data to explain the variation in the measurements. With respect to ks, the results show that fertile silty soils are more sensitive than formerly defined.