Skip to main content

ORIGINAL RESEARCH article

Front. Energy Res.
Sec. Smart Grids
Volume 12 - 2024 | doi: 10.3389/fenrg.2024.1453715
This article is part of the Research Topic Integrated Energy System Planning, Optimization, Trading and Benefit Assessment View all 6 articles

Multi-Objective DG Placement in Radial Distribution System using IbI Logic Algorithm

Provisionally accepted
Nitin Saxena Nitin Saxena 1*M Pandit M Pandit 2L Srivastava L Srivastava 2
  • 1 Jabalpur Engineering College, Jabalpur, Madhya Pradesh, India
  • 2 Madhav Institute of Technology & Science Gwalior, Gwalior, Madhya Pradesh, India

The final, formatted version of the article will be published soon.

    This paper presents a unique optimisation method based on the incomprehensible but intelligiblein-time (IbI) logic algorithm to optimally place dispersed generators in small, medium, large and very large (16-, 33-, 69-and 118-bus) radial distribution power networks to reduce power losses, the total operating cost and the voltage deviation and to improve the voltage level. Two types of multiple distributed generators (DGs) are employed in this study, one working at unity power factor and the other at 0.866 p.f. The IbI logic algorithm works on understanding logic that are currently not logic but would be so over time. The proposed approach was used to address a multi-objective multi DG placement problem. The results generated through this method were compared with those generated by other methods and were observed to be comparatively remarkable.

    Keywords: distributed generation, Optimal placement of DG, Radial distribution network, Incomprehensible but Intelligibleintime (IbI) logics, Load models, Power loss reduction, Voltage profile improvement, Voltage deviation index

    Received: 23 Jun 2024; Accepted: 29 Aug 2024.

    Copyright: © 2024 Saxena, Pandit and Srivastava. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

    * Correspondence: Nitin Saxena, Jabalpur Engineering College, Jabalpur, 482011, Madhya Pradesh, India

    Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.