AUTHOR=Wu Yizhi , Zhang Yu , Wang Jian , Ma Yongda , Song Zhichao , Zeng Xianghui , Cao Aiqng TITLE=Study on the mechanism of improved oil recovery by nitrogen foam flooding in bottom water reservoirs JOURNAL=Frontiers in Energy Research VOLUME=11 YEAR=2023 URL=https://www.frontiersin.org/journals/energy-research/articles/10.3389/fenrg.2023.1120635 DOI=10.3389/fenrg.2023.1120635 ISSN=2296-598X ABSTRACT=

There are abundant bottom water reservoirs in China. Unlike conventional oil reservoirs, bottom water reservoirs have various problems, such as early water breakthrough, short water-free oil recovery period, and rapid water cut increase. For example, during water flooding, the injected water easily breaks into the bottom water and does not effectively displace the upper crude oil. The recovery rate is generally low. Based on this phenomenon, an experimental study of nitrogen foam flooding in bottom water reservoirs is conducted in this paper. The seepage characteristics of nitrogen foam in oil and water layers are studied through one-dimensional core tube experiments. Through two-dimensional plate oil displacement experiments, we have revealed the fluid migration and distribution characteristics in the plane and vertical directions during nitrogen foam flooding in bottom water reservoirs; additionally, we have summarized the mechanisms of nitrogen foam in bottom water reservoirs involved in improving oil recovery characteristics. The research results show that the seepage resistance of foam in the water layer is much greater than that in the oil layer, effectively increasing the displacement strength of the oil layer. During the development stage of bottom water flooding in bottom water reservoirs, the water cut increases rapidly, the bottom water coning is obvious, and the residual oil is mainly distributed between the oil wells and the upper part of the oil layer near the wellbore. During nitrogen foam flooding, the foam enters the water layer to form an effective plug so that the subsequent foam is diverted into the oil layer; additionally, the oil is displaced laterally to the production well for production. When the foam enters the oil layer, it defoams and floats to form a secondary gas cap; this effect causes displacement of the residual oil at the top and effectively improves the displacement efficiency by weeping volume of the injected fluid”