AUTHOR=Tao Chuansijia , Du Xin , Zhou Xun , Luo Yizhou , Xu Wenjuan , Wang Songtao , Wang Zhongqi TITLE=Effect of compound lean blades on separation structures in high loaded compressor cascades under high subsonic condition JOURNAL=Frontiers in Energy Research VOLUME=10 YEAR=2022 URL=https://www.frontiersin.org/journals/energy-research/articles/10.3389/fenrg.2022.974508 DOI=10.3389/fenrg.2022.974508 ISSN=2296-598X ABSTRACT=

Three-dimensional separation is an inherent flow feature in the blade-end corner of compressors passage, which is a primary source of entropy generation and loss. This paper researches the effect of key geometrical parameters (camber angle, solidity, dihedral angle of compound lean blade) and incoming condition (Mach number) on the evolution of corner separation in a low aspect ratio linear cascade. The underlying flow mechanism is explored in detail. The evolution of typical flow characteristics with the variation of inlet Mach number, camber angle and solidity is interpreted. For different blade loading levels, there are different corner separation forms and vortex structures. The influence of dihedral angle on the flow field structure and flow loss is analyzed, thus the effect mechanism of the compound lean blade in different flow environment is explored. Without the trailing edge shedding vortex, positive dihedral angle alleviates the low momentum fluid accumulation and corner separation at the incidence angle about 0°, but exacerbates the deteriorating corner separation at large positive incidence angle. When the trailing edge shedding vortex and the suction surface separating vortex exist together, positive dihedral angle promotes the upstream migration of the trailing edge shedding vortex, which helps to truncate the suction surface separating vortex. This variation of vortex structures is conducive to weaken the development of corner separation and delay corner stall.