Skip to main content

EDITORIAL article

Front. Energy Res., 09 September 2020
Sec. Process and Energy Systems Engineering
This article is part of the Research Topic Organic Rankine Cycle for Efficiency Improvement of Industrial Processes and Urban Systems View all 7 articles

Editorial: Organic Rankine Cycle for Efficiency Improvement of Industrial Processes and Urban Systems

  • 1School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China
  • 2Clean Energy Processes Laboratory, Department of Chemical Engineering, Imperial College London, London, United Kingdom
  • 3Department of Engineering, Durham Energy Institute, Durham University, Durham, United Kingdom
  • 4Thermodynamics Laboratory, University of Liège, Liège, Belgium

Background

The organic Rankine cycle (ORC) is a particularly promising and mature technology for the utilization of low- and medium-grade thermal sources such as solar (Quoilin et al., 2011; Freeman et al., 2015; Markides, 2015), geothermal (Quoilin et al., 2013), or waste heat from industrial processes and internal combustion engines (Wang et al., 2011; Lu et al., 2017). ORCs are thermal power cycles that employ organic working fluids in order to convert low/medium-temperature thermal energy into either mechanical or electrical power. One advantage of ORCs is that the best working fluid can be chosen according to different heat sources and applications. For example, there exists a significant amount of surplus energy across industrial processes, and ORC systems can be integrated with these processes for the efficient utilization of this otherwise wasted energy. The estimated global waste heat energy in 2012 is 245 PJ, about 51.8% of the overall consumed primary energy (Forman et al., 2016). ORC technology has progressed significantly in recent years, with applications of the technology being a key component of sustainable development of a high-efficiency, low-carbon society.

This collection for Frontiers in Energy Research seeks to present the latest progress, technological development and application of ORC technology. The Research Topic covers research on systematic system design, strategies for performance optimization, design of new organic working fluids, system integration in real applications and experimental investigation on demonstrators using both simulation and experimental studies. This Frontiers Research Topic has attracted a total of six research articles from countries including China, United Kingdom, Belgium, and Iraq. The editorial team would like to thank the authors and reviewers for their excellent contributions in making this Research Topic a success.

Summary

Papers in this collection highlight different aspects of ORC technology from fluid selection, innovative system design and application, to expander development. In terms of working fluid selection, the research considers the integration of system design and parameter optimization simultaneously with the identification of the best working fluid. White and Sayma propose an optimization framework that can optimize the working fluid and cycle parameters simultaneously, and identify whether a subcritical or transcritical cycle, with or without a recuperator, is most suitable for a specific application based on a non-linear turbine model and Peng-Robinson equation of state. The optimal cycles if a performance map is used for the expander efficiency are quite different from that assuming a constant turbine efficiency. Castelli et al. employ a cycle optimization approach to identify the most promising working fluid from 102 candidates including both pure fluids and zeotropic mixtures. The cycle variables are optimized for maximum thermodynamic performance. For waste-heat recovery in an aluminum production plant as a case study, HFE-347mcc and isobutane-isopentane are found to be two particularly suitable working fluids with a high exergy efficiency. Multi-objective optimization is also adopted in both studies to evaluate thermodynamic as well as economic performance comprehensively.

Three contributions in this Research Topic focus on system design and innovative applications of ORC technology. Al-Tameemi et al. design a gas-powered heating system, integrating an ORC system with a heat pump. The performance and operation of the combined ORC and heat pump system are discussed, and optimal control strategies are considered using Aspen Plus in response to variations in the ambient conditions. The cold water first flows into the heat pump system and then to the ORC system is a better design. Zhang et al. put forward a power and ejector-refrigeration system using zeotropic mixture R134a/R123 as the working fluid. The relationship between the input heat of the ejector, the net power changes and the power saved by ejector is analyzed. The power saved by the ejector is larger than the net power reduction. Song et al. investigate the thermo-economic performance of subcritical and transcritical geothermal ORC power-plants with or without superheating and recuperation. Non-recuperated transcritical cycle systems using working fluids whose critical temperature are close to the heat source temperature are reported as being favorable in this large-scale application. These studies suggest that ORC technology has a great potential in various industrial and renewable-heat processes. A high exergy efficiency can be achieved as around 60% with a profitable economic performance.

In ORC systems, especially in small-scale systems, the expander is a key component that can strongly determine thermodynamic performance and affect the overall cost. The development of new, high-efficiency expanders is a critical element of the mass deployment of small-scale ORC systems. Oudkerk and Lemort present an experimental study of a swash-plate piston expander. The influences of the rotational speed and levels of pressure on the power output and the expander isentropic efficiency are investigated. The importance of different sources of losses is analyzed based on a detailed mathematical model. The results show that the maximal power output and isentropic efficiency of the expander are 2.8 kW and 53%, respectively.

Outlook

ORC technology shows great potential for the effective utilization of low-to-medium temperature waste heat in industrial applications. The thermal efficiency of an ORC system can be a few percentages to over 20% according to the temperature of the heat source. Huge amount of additional power can be generated by ORC systems if global waste heat is utilized comprehensively. However, significant challenges exist, and further progress is needed before successful, widespread ORC system deployment. An issue of increasing importance and urgency in this regard concerns the development of new and efficient working fluids with environmentally friendly properties. New working fluids such as HFOs and HFEs appear poised to become the next-generation working fluids for ORC systems, whereas more novel working fluids need to be developed in further research. Meanwhile, research and development into even more innovative ORC systems remain crucial to improving performance and economic viability. Designing suitable ORC systems tailored to various industrial applications is key, as is the requirement to optimize these systems while considering the full details of their integration within wider energy systems.

Author Contributions

All authors listed have made a substantial, direct and intellectual contribution to the work, and approved it for publication.

Conflict of Interest

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

References

Forman, C., Muritala, I. K., Pardemann, R., and Meyer, B. (2016) Estimating the global waste heat potential. Renew. Sustain. Energy Rev. 57, 1568–1579. doi: 10.1016/j.rser.2015.12.192

CrossRef Full Text | Google Scholar

Freeman, J., Hellgardt, K., and Markides, C. N. (2015). An assessment of solar-powered organic Rankine cycle systems for combined heating and power in UK domestic applications. Appl. Energy 138, 605–620. doi: 10.1016/j.apenergy.2014.10.035

CrossRef Full Text | Google Scholar

Lu, Y., Roskilly, A. P., Yu, X., Tang, K., Jiang, L., Smallbone, A., et al. (2017). Parametric study for small scale engine coolant and exhaust heat recovery system using different organic Rankine cycle layouts. Appl.Thermal Eng. 127, 1252–1266. doi: 10.1016/j.applthermaleng.2017.08.128

CrossRef Full Text | Google Scholar

Markides, C. N. (2015). Low-concentration solar-power systems based on organic Rankine cycles for distributed-scale applications: overview and further developments. Front. Energy Res. 3:00047. doi: 10.3389/fenrg.2015.00047

CrossRef Full Text | Google Scholar

Quoilin, S., Broek, M. V. D., Declaye, S., Dewallef, P., and Lemort, V. (2013). Techno-economic survey of Organic Rankine Cycle (ORC) systems. Renew. Sustain. Energy Rev. 22, 168–186. doi: 10.1016/j.rser.2013.01.028

CrossRef Full Text | Google Scholar

Quoilin, S., Orosz, M., Hemond, H., and Lemort, V. (2011). Performance and design optimization of a low-cost solar organic Rankine cycle for remote power generation. Solar Energy 85, 955–966. doi: 10.1016/j.solener.2011.02.010

CrossRef Full Text | Google Scholar

Wang, E. H., Zhang, H. G., Fan, B. Y., Ouyang, M. G., Zhao, Y., and Mu, Q. H. (2011). Study of working fluid selection of organic Rankine cycle (ORC) for engine waste heat recovery. Energy 36, 3406–3418. doi: 10.1016/j.energy.2011.03.041

CrossRef Full Text | Google Scholar

Keywords: organic rankine cycle, heat recovery, expansion machine, thermal energy system, fluid selection, multi-objective optimization, zeotropic mixture, geothermal

Citation: Wang E, Markides CN, Lu Y and Lemort V (2020) Editorial: Organic Rankine Cycle for Efficiency Improvement of Industrial Processes and Urban Systems. Front. Energy Res. 8:569868. doi: 10.3389/fenrg.2020.569868

Received: 05 June 2020; Accepted: 14 August 2020;
Published: 09 September 2020.

Edited and reviewed by: Ellen B. Stechel, Arizona State University, United States

Copyright © 2020 Wang, Markides, Lu and Lemort. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Enhua Wang, enhua.wang@yahoo.com

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.