Skip to main content

EDITORIAL article

Front. Energy Res., 18 October 2019
Sec. Bioenergy and Biofuels
This article is part of the Research Topic Microbial Synthesis, Gas-Fermentation and Bioelectroconversion of CO2 and other Gaseous Streams View all 13 articles

Editorial: Microbial Synthesis, Gas-Fermentation and Bioelectroconversion of CO2 and Other Gaseous Streams

  • 1e-BioCenter, Department of Environmental Science and Policy, University of Milan, Milan, Italy
  • 2Separation and Conversion Technology, Flemish Institute for Technological Research (VITO), Mol, Belgium
  • 3LEQUiA, Institute of the Environment, University of Girona, Girona, Spain

Introduction

The ongoing climate crisis, mainly caused by the emission of greenhouse gases (GHGs), gives rise to an urgent need for solutions to re-convert industrial waste gases and emissions into useful chemicals (Lal, 2005). Concentrated streams of carbon dioxide (CO2) are continuously generated and emitted by a variety of anthropogenic activities. These include both biogenic sources (e.g., organic waste and wastewater treatment plants, biogas plants, landfills, waste and biomass combustion facilities, etc.) and fossil-carbon sources (e.g., centralized fossil-based energy production facilities, engines, etc.) In recent years, several efforts have been undertaken globally that are directed toward CO2 capture and converting CO2 into storable fuels and chemicals (ElMekawy et al., 2016). This conversion can be done via living bacteria as biocatalysts (Rojas et al., 2018a), via enzymes (Chiranjeevi et al., 2019), or electrocatalytically (Gutiérrez Sánchez et al., 2019).

In light of the different possibilities for efficiently utilizing such concentrated CO2 streams, their dispersion in the atmosphere is a waste of an otherwise potentially valuable resource. In fact, only photosynthetic organisms can utilize CO2 at atmospheric concentrations (around 400 ppm) (González Del Campo et al., 2013). Plants and photosynthetic microorganisms are known to significantly increase their growth rates under higher CO2 concentrations (Brown et al., 2019). CO2 fertilization in microalgae production facilities is widely recognized as a strategy for improving biomass yields and synthesizing a variety of bioproducts and food ingredients (Eustance et al., 2016).

Alternative pathways enabling the utilization of concentrated CO2 streams to synthesize organic molecules have recently been developed using microorganisms (bacteria and archaea) as catalysts. In gas fermentation, reducing power is provided either within the gaseous stream or in the water solution. In microbial electrochemical technologies (METs), a biocatalyst (i.e., electroactive bacteria) exchanges electrons with an external circuit through a solid electrode.

Gas Fermentation

Gas fermentation is a process in which microorganisms can fix CO2 if sources of reducing power and metabolic energy are available (Liew et al., 2016). Hydrogen (H2) generated by electrochemical water-splitting is an example of an energy-rich electron carrier that can be utilized in co-fermentation with CO2. Bio-syngas streams coming from biomass gasification or pyrolysis are mainly rich in H2, carbon monoxide (CO), methane (CH4), and CO2. Their efficient utilization by gas fermentation has already been demonstrated at pilot scale for the production of high-value biocommodities (e.g., succinate, 2,3-butanediol, lactate, and acetone; Marcellin et al., 2016).

Bioelectrochemical CO2 Reduction

More recently, METs were proposed as a new strategy for furnishing electrons and metabolic energy for carbon fixation. In microbial electrosynthesis (MES) processes such as electromethanogenesis and electrofermentation, renewable electricity stimulates the metabolism of selected electro-active microbial communities to produce organic molecules [methane, short-chain fatty acids, alcohols, etc. (Kracke and Krömer, 2014; Sharma et al., 2014; Schievano et al., 2016)]. These molecules can undergo further carbon chain-elongation by heterotrophic communities to synthesize higher value biocommodities and biopolymers (Agler et al., 2012; Dennis et al., 2013).

The reduction of CO2 to organics can occur through direct electron transfer (DET) or through the intermediate production of H2, which acts as an electron transfer shuttle (as is the case with many acetogenic bacteria (Puig et al., 2017); Wenzel et al.). Until now, the main products of MES have been methane (electromethanogenesis) and acetate (homoacetogenesis), although the yield and product titers are still far from commercial application. During the last 10 years of research, several strategies have aimed at improving MES reactors and their production rates/yields. In the past 2 years, MES has been more intensively studied. Jourdin et al. proved that MES is progressing to becoming a robust clean CO2 biorecycling process, producing higher-value chemicals at increasing rates while minimizing the cost of electrode materials. Verbeeck et al. presented a reactor setup that allowed the operation of MES reactors at higher current densities. An H2/CO2 gas-fermentation column was directly coupled to extraction, allowing pure product recovery in an acidic and clean liquid, achieving simultaneous stabilization of the pH in the fermentation broth.

Another key parameter affecting MES performance is the cathode material itself. Some key-properties are essential for superior cathodic performance: high conductivity, excellent chemical stability, high mechanical strength, good biocompatibility, high surface area, and low cost (Aryal et al., 2017). Aryal et al. reported the fabrication of a cathode coated with highly conductive polystyrene sulfonate polymer for acetate production in MES. This coating allowed increased acetate production while optimizing current consumption. The biofilm of S. ovata showed increased biomass presence as compared with the plain carbon cloth surface. Another strategy is the use of granular activated carbon (GAC) and graphite granules (GG) in a packed bed as the cathode electrode. Liu et al. showed that both GAC and GG are suitable cathode materials for high methane production rates in methane-producing MESs.

Gas diffusion electrodes (GDEs) have also represented a breakthrough in the current state of the art of MES. Srikanth et al. (2018) evaluated the impact of GDEs in enhancing CO2 bioavailability for its transformation to C4-organics, especially to alcohols using selective mixed culture. A more stable current density was observed with GDE vs. submerged experiments, which significantly varied with pH and respective CO2 solubility. An interesting synergy between METs and syngas fermentation is that the bio-char resulting from biomass pyrolysis can have interesting properties for the fabrication of bio-electrodes, such as electrical conductivity and a high surface area for microbial biofilm growth (Marzorati et al., 2018; Prado et al., 2019).

The chemical energy stored in the products of MES can be seen as a potential store of renewable energy surpluses (Schievano et al., 2018). However, solar and wind energy are typically characterized by a fluctuating regime, and this may represent a threat to microbial communities in MES biocathodes that rely on continuous polarization. Mateos et al. (2020) recently showed how MES could be resilient to long-term power interruptions (6 weeks). In the same line, Rojas et al. (2018b) demonstrated that the electro-autotrophic activity of an MES system could recover after power shortages, restoring acetic acid production while recovering sufficient electron transfer at current densities of −25 A m−2.

Current State of Art (Toward Upscaling and Industrialization)

In recent years, several developments have taken place to upscale the microbial gaseous conversion technologies, and both governments and industry have taken a lead in supporting such initiatives. One of the leaders in this field is the USA-based company LanzaTech, which has made rapid strides in syngas fermentation, with several demonstration plants operating globally (LanzaTech, 2019). Their core technology is based on the acetogen Clostridium autoethanogenum, with an estimated volumetric productivity of around 10 g l−1 h−1 (Takors et al., 2018). Within Europe, LanzaTech is involved in the Steelanol project funded by the European Commission, which aims at building a demonstrator for ethanol production at the Arcelor Mittal steel mill in Ghent to convert the gases produced during the steel production process by using fermentation by microbes that secrete ethanol (Steelanol, 2019). The plant is expected to have a capacity of 62,000 t/a (Carus et al., 2019). Their other operations are in China, India, and South Africa.

Upgrading of biogas by converting the CO2 fraction of the biogas into gas-grid quality methane is also gaining significant momentum, and several pilot and industrial initiatives are currently being undertaken (Aryal et al., 2018). One of the main players in this field is the Germany-based company Electrochaea, which recently announced the commissioning of a power-to-gas demonstration facility in Foulum, Denmark, based on a 10,000-liter bioreactor (Electrochaea, 2018).

Besides these industrial applications, research on this topic is also gaining momentum, and within Europe, several projects at different technology readiness levels (TRL) are being supported by the European Commission. One of these projects is BioRECO2VER, which aims at refining biotechnological processes that can turn CO2 from industrial point sources into valuable platform chemicals such as lactate and isobutene (http://bioreco2ver.eu/). Another recently started project, Bac-To-Fuel, is developing a process to transform CO2/H2 into fuels by mimicking the photosynthetic process of plants. This approach uses novel inorganic photocatalysts that are capable of evolving H2 from photocatalytic water splitting in the presence of sunlight and enhanced bacterial strains to convert CO2 and the renewable hydrogen into biofuels (i.e., ethanol and butanol) in a novel electro-biocatalytic cell (http://bactofuel.eu/). The CelbiCon project, also funded by the European Commission under the H2020 program, attempts to combine CO2 capture and electrochemical and biochemical conversion technologies for CO2 conversion into chemicals (http://www.celbicon.org/). Yet another recent project on this topic is BIOCON-CO2, which is developing biological processes to transform raw waste CO2 from the iron, steel, cement, and electric power industries into value-added chemicals and plastics (https://biocon-co2.eu/). The above-mentioned projects are only representative examples of the research projects that are currently going on in the EU. There are several other initiatives being undertaken globally to harvest the potential of microorganisms in converting gaseous feedstocks into valuable chemicals.

Conclusions

To summarize, microbial conversion of waste gases, industrial off-gases, and CO2-rich streams is gaining momentum, with interest coming from the industrial users, governments giving support, and researchers working toward upscaling these systems. A multidisciplinary approach is needed to develop new metabolic pathways and to optimize existing processes. Synthetic biology and microbial community selection should play a major role in constructing strains or communities for commercial operations. Metatranscriptomics, metabolomics, and proteomics, as well as metabolic engineering, are fundamental tools to understand and enhance microbial catalysis. Moreover, bioreactor engineering and material science are crucial for studying scalable process architectures and for optimizing microbial biofilm growth, gas solubilization, and product recovery.

This broad range of disciplines is also represented in the papers appearing on this Research Topic, which contribute toward advancing the basic research while moving to the next level of practical implementation. Theoretical and perspective insights into several possible metabolic pathways (Averesch and Kracke) and thermodynamic considerations (Scheller) have been presented regarding methane oxidation (and that of other alkanes) and toward the production of liquid biofuels or electricity. Also, fundamental experiments are being carried out, dealing with biofilm formation, microbial community structure on bioelectrodes (Jourdin et al.), and electrode materials optimization (Aryal et al., 2018; Liu et al.).

Innovative approaches are also being taken to biological CO2 conversion, including an interesting experiment on the use of purple phototrophic bacteria for simultaneous bio-H2 generation and carbon fixation (Vasiliadou et al.) and a mini-review on possible biocathodic CO2-fixation pathways and applications by sulfate-reducing electroautotrophs (Agostino and Rosenbaum). Finally, practical approaches toward different configurations of reactors and process design have been reported (Ishii et al.; Lim et al.; Verbeeck et al.).

Author Contributions

All authors listed have made a substantial, direct and intellectual contribution to the work, and approved it for publication.

Funding

AS was selected as the PI by the SIR 2014 Grant (PROJECT RBSI14JKU3−2015–2019), Italian Ministry of University and Research (MIUR). SP was a Serra Húnter Fellow (UdG-AG-575). LEQUiA has been recognized as a consolidated research group by the Generalitat de Catalunya (2017SGR-1552). DP was working on bacterial conversion of CO2 and hydrogen into fuels in the project BAC-TO-FUEL funded by the European Union's Horizon 2020 Research and Innovation Program under Grant Agreement no. 825999.

Conflict of Interest

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

The reviewer SP declared a past co-authorship with one of the authors DP to the handling editor.

References

Agler, M. T., Spirito, C. M., Usack, J. G., Werner, J. J., and Angenent, L. T. (2012). Chain elongation with reactor microbiomes: upgrading dilute ethanol to medium-chain carboxylates. Energy Environ. Sci. 5, 8189–8192. doi: 10.1039/c2ee22101b

CrossRef Full Text | Google Scholar

Aryal, N., Ammam, F., Patil, S. A., and Pant, D. (2017). An overview of cathode materials for microbial electrosynthesis of chemicals from carbon dioxide. Green Chem. 19, 5748–5760. doi: 10.1039/C7GC01801K

CrossRef Full Text | Google Scholar

Aryal, N., Kvist, T., Ammam, F., Pant, D., and Ottosen, L. D. (2018). An overview of microbial biogas enrichment. Bioresour. Technol. 264, 359–369. doi: 10.1016/j.biortech.2018.06.013

PubMed Abstract | CrossRef Full Text | Google Scholar

Brown, T. W., Lajeunesse, M. J., and Scott, K. M. (2019). Strong effects of elevated CO2 on freshwater microalgae and ecosystem chemistry. Limnol. Oceanogr. doi: 10.1002/lno.11298. [Epub ahead of print].

CrossRef Full Text | Google Scholar

Carus, M., Skoczinski, P., Dammer, L., vom Berg, C., Raschka, A., and Breitmayer, E. (2019). Hitchhiker's Guide to Carbon Capture and Utilisation. Hürth 2019-02. Available online at: http://news.bio-based.eu/hitchhikers-guide-to-carbon-capture-utilisation/ (accessed August 30, 2019).

Google Scholar

Chiranjeevi, P., Bulut, M., Breugelmans, T., Patil, S. A., and Pant, D. (2019). Current trends in enzymatic electrosynthesis for CO2 reduction. Curr. Opin. Green Sustain. Chem. 16, 65–70. doi: 10.1016/j.cogsc.2019.02.007

CrossRef Full Text | Google Scholar

Dennis, P. G., Harnisch, F., Yeoh, Y. K., Tyson, G. W., and Rabaey, K. (2013). Dynamics of cathode-associated microbial communities and metabolite profiles in a glycerol-fed bioelectrochemical system. Appl. Environ. Microbiol. 79, 4008–4014. doi: 10.1128/AEM.00569-13

PubMed Abstract | CrossRef Full Text | Google Scholar

Electrochaea (2018). Electrochaea Commissions World's Largest Power-to-Gas Demonstration Project. Available online at: http://www.electrochaea.com/electrochaea-commissions-worlds-largest-power-to-gas-demonstration-project-based-on-biological-methanation/ (accessed August 30, 2019).

Google Scholar

ElMekawy, A., Hegab, H. M., Mohanakrishna, G., Elbaz, A. F., Bulut, M., and Pant, D. (2016). Technological advances in CO2 conversion electro-biorefinery: a step toward commercialization. Bioresour. Technol. 215, 357–370. doi: 10.1016/j.biortech.2016.03.023

PubMed Abstract | CrossRef Full Text | Google Scholar

Eustance, E. T., Wray, J., Badvipour, S. R., and Sommerfeld, M. (2016). Volatile nutrients - improving utilization of ammonia and carbon dioxide in microalgal cultivation: a review. Curr. Biotechnol. 5, 130–141. doi: 10.2174/2211550105666160120000606

CrossRef Full Text | Google Scholar

González Del Campo, A., Cañizares, P., Rodrigo, M. A., Fernández, F. J., and Lobato, J. (2013). Microbial fuel cell with an algae-assisted cathode: a preliminary assessment. J. Power Sour. 242, 638–645. doi: 10.1016/j.jpowsour.2013.05.110

CrossRef Full Text | Google Scholar

Gutiérrez Sánchez, O., Birdja, Y. Y., Bulut, M., Vaes, J., Breugelmans, T., and Pant, D. (2019). Recent advances in industrial CO2 electroreduction. Curr. Opin. Green Sustain. Chem. 16, 47–56. doi: 10.1016/j.cogsc.2019.01.005

CrossRef Full Text | Google Scholar

Kracke, F., and Krömer, J. O. (2014). Identifying target processes for microbial electrosynthesis by elementary mode analysis. BMC Bioinformatics 15:410. doi: 10.1186/s12859-014-0410-2

PubMed Abstract | CrossRef Full Text | Google Scholar

Lal, R. (2005). World crop residues production and implications of its use as a biofuel. Environ. Int. 31, 575–584. doi: 10.1016/j.envint.2004.09.005

PubMed Abstract | CrossRef Full Text | Google Scholar

LanzaTech (2019). Available online at: http://www.lanzatech.com/innovation/technical-overview/ (accessed August 30, 2019).

Google Scholar

Liew, F., Martin, E., Tappel, R., Heijstra, B., Mihalcea, C., and Köpke, M. (2016). Gas fermentation – a flexible platform for commercial scale production of low carbon fuels and chemicals from waste and renewable feedstocks. Front. Microbiol. 7:694. doi: 10.3389/fmicb.2016.00694J

PubMed Abstract | CrossRef Full Text | Google Scholar

Marcellin, E., Behrendorff, J. B., Nagaraju, S., DeTissera, S., Segovia, S., Palfreyman, R., et al. (2016). Low carbon fuels and commodity chemicals from waste gases – Systematic approach to understand energy metabolism in a model acetogen. Green Chem. 18, 3020–3028. doi: 10.1039/C5GC02708

CrossRef Full Text | Google Scholar

Marzorati, S., Goglio, A., Fest-Santini, S., Mombelli, D., Villa, F., Cristiani, P., et al. (2018). Air-breathing bio-cathodes based on electro-active biochar from pyrolysis of Giant Cane stalks. Int. J. Hydrogen Energy. 44, 4496–4507. doi: 10.1016/J.IJHYDENE.2018.07.167

CrossRef Full Text | Google Scholar

Mateos, R., Escapa, A., San-Martín, M. I., De Wever, H., Sotres, A., and Pant, D. (2020). Long-term open circuit microbial electrosynthesis system promotes methanogenesis. Journal of Energy Chemistry, 41, 3–6.

Google Scholar

Prado, A., Berenguer, R., and Esteve-Núñez, A. (2019). Electroactive biochar outperforms highly conductive carbon materials for biodegrading pollutants by enhancing microbial extracellular electron transfer. Carbon 146, 597–609. doi: 10.1016/J.CARBON.2019.02.03

CrossRef Full Text | Google Scholar

Puig, S., Ganigu,é, R., Batlle-Vilanova, P., Balaguer, M. D., Bañeras, L., and Colprim, J. (2017). Tracking bio-hydrogen-mediated production of commodity chemicals from carbon dioxide and renewable electricity. Bioresour. Technol. 228, 201–209. doi: 10.1016/j.biortech.2016.12.035

PubMed Abstract | CrossRef Full Text | Google Scholar

Rojas, M. D. P. A., Mateos, R., Sotres, A., Zaiat, M., Gonzalez, E. R., Escapa, A., et al. (2018b). Microbial electrosynthesis (MES) from CO2 is resilient to fluctuations in renewable energy supply. Energy Conver. Manage. 177, 272–279. doi: 10.1016/j.enconman.2018.09.064

CrossRef Full Text | Google Scholar

Rojas, M. D. P. A., Zaiat, M., Gonzalez, E. R., De Wever, H., and Pant, D. (2018a). Effect of the electric supply interruption on a microbial electrosynthesis system converting inorganic carbon into acetate. Bioresour. Technol. 266, 203–210. doi: 10.1016/j.biortech.2018.06.074

CrossRef Full Text | Google Scholar

Schievano, A., Goglio, A., Erckert, C., Marzorati, S., Rago, L., and Cristiani, P. (2018). Organic waste and bioelectrochemical systems: a future interface between electricity and methane distribution grids. Detritus 1, 57–63. doi: 10.26403/detritus/2018.6

CrossRef Full Text | Google Scholar

Schievano, A., Sciarria, T. P., Vanbroekhoven, K., De Wever, H., Puig, S., Andersen, S. J., et al. (2016). Electro-fermentation–merging electrochemistry with fermentation in industrial applications. Trends Biotechnol. 34, 866–878. doi: 10.1016/j.tibtech.2016.04.007

PubMed Abstract | CrossRef Full Text | Google Scholar

Sharma, M., Bajracharya, S., Gildemyn, S., Patil, S. A., Alvarez-Gallego, Y., Pant, D., et al. (2014). A critical revisit of the key parameters used to describe microbial electrochemical systems. Electrochim. Acta 140, 191–208. doi: 10.1016/j.electacta.2014.02.111

CrossRef Full Text | Google Scholar

Srikanth, S., Singh, D., Vanbroekhoven, K., Pant, D., Kumar, M., Puri, S. K., et al. (2018). Electro-biocatalytic conversion of carbon dioxide to alcohols using gas diffusion electrode. Bioresour. Technol. 265, 45–51. doi: 10.1016/j.biortech.2018.02.058

PubMed Abstract | CrossRef Full Text | Google Scholar

Steelanol (2019). Available online at: http://www.steelanol.eu/en (accessed August 30, 2019).

Google Scholar

Takors, R., Kopf, M., Mampel, J., Bluemke, W., Blombach, B., Eikmanns, B., et al. (2018). Using gas mixtures of CO, CO2 and H2 as microbial substrates: the do's and don'ts of successful technology transfer from laboratory to production scale. Microb. Biotechnol. 11, 606–625. doi: 10.1111/1751-7915.13270

PubMed Abstract | CrossRef Full Text | Google Scholar

Keywords: bioelectrochemical system (BES), microbial electrosynthesis (MES), electrofermentation, gas fermentation, CO2 fixation, microbial electrochemical technologies (MET), electromethanogenesis, biocathode

Citation: Schievano A, Pant D and Puig S (2019) Editorial: Microbial Synthesis, Gas-Fermentation and Bioelectroconversion of CO2 and Other Gaseous Streams. Front. Energy Res. 7:110. doi: 10.3389/fenrg.2019.00110

Received: 30 July 2019; Accepted: 26 September 2019;
Published: 18 October 2019.

Edited by:

Sachin Kumar, Sardar Swaran Singh National Institute of Renewable Energy, India

Reviewed by:

Sunil A. Patil, Indian Institute of Science Education and Research Mohali, India
Elliot S. Friedman, University of Pennsylvania, United States

Copyright © 2019 Schievano, Pant and Puig. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Deepak Pant, deepak.pant@vito.be

These authors have contributed equally to this work

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.