Skip to main content

ORIGINAL RESEARCH article

Front. Earth Sci.
Sec. Geohazards and Georisks
Volume 13 - 2025 | doi: 10.3389/feart.2025.1528098

Microstructure and macro-mechanical properties of residual soil subjected to repeated hygroscopic cycles

Provisionally accepted
Xutang Xu Xutang Xu *xianglong chen xianglong chen yeqing Cai yeqing Cai Xiang Xu Xiang Xu
  • Fujian Agriculture and Forestry University, Fuzhou, China

The final, formatted version of the article will be published soon.

    Residual soil widely distributed in Fujian region has the characteristics of strong structure and easy softening in contact with water, which limits the possibility of its beneficial utilization. This study investigates the impact of humid and hot environment on the strength characteristics of residual soil, and how changes in soil microstructure are correlated with strength attenuation. Residual soil with particle size distribution from gravel to clay was subjected to repeated hygroscopic cycle tests. Subsequently, unsaturated triaxial consolidation drainage shear (CD) and nuclear magnetic resonance (NMR) tests were carried out on the samples undergoing 0~7 hygroscopic cycles, and the damage mechanism of the soil was analyzed from macroscopic to microscopic scales. Results showed that the soil shear characteristics were influenced by the number of hygroscopic cycles and had a correlation with stress level (confining pressure and target suction), the greater the cumulative irreversible deformation and the more pronounced shear dilation characteristics of the soil had after more hygroscopic cycles and higher stress levels. The shear strength index of unsaturated soil after repeated hygroscopic paths presented a decreasing trend, but the attenuation of internal friction angle and suction friction angle was limited, and the average values were 21.3° and 14.7°, respectively. The T2 spectral distribution curve of soil was a trimodal pattern, and the content of small holes consistently decreasing as the cycling process progressed, while the percentage of macropores increased significantly. In view of the continuous dissolution of soluble minerals and cementing materials and the repeated release of suction in the soil, the internal particles of the soil were gradually loosened. Accompanied by the continuous expansion and penetration of intergranular pores, connecting cracks were ultimately formed. The above fatigue damage to the soil pore structure led to the attenuation of its macro-mechanical properties. Throughout the test, the saturated shear strength of the soil continued to decrease due to the interaggregate connection was always broken, while the destruction of the the intergranular connection in the aggregate was relatively slow, and the internal friction angle in the soil implied a slow decrease and even stabilized at a later stage.

    Keywords: Residual soil, repeated hygroscopic cycles, Saturated shear strength, suction friction angle, microstructure

    Received: 14 Nov 2024; Accepted: 09 Jan 2025.

    Copyright: © 2025 Xu, chen, Cai and Xu. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

    * Correspondence: Xutang Xu, Fujian Agriculture and Forestry University, Fuzhou, China

    Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.