Skip to main content

RETRACTION article

Front. Earth Sci., 21 May 2024
Sec. Environmental Informatics and Remote Sensing
This article is part of the Research Topic Coal and Rock Dynamic Disasters: Advances of Physical and Numerical Simulation in Monitoring, Early Warning, and Prevention View all 15 articles

Retraction: Study on the design of composite beams under complex environment in mountainous areas

A Retraction of the Original Research Article
Study on the design of composite beams under complex environment in mountainous areas

by Zhao Y, Sun C and Li S (2023). Front. Earth Sci. 11:1121467. doi: 10.3389/feart.2023.1121467

The Journal retracts the 2023 article cited above.

Following publication, the publisher found evidence of peer review manipulation. As the scientific integrity of the article cannot be guaranteed, and in adherence to the recommendations of the Committee on Publication Ethics (COPE), the article is retracted. This retraction was approved by the Chief Executive Editor of Frontiers. The authors have not responded to correspondence regarding this retraction.

Citation: Frontiers Editorial Office (2024) Retraction: Study on the design of composite beams under complex environment in mountainous areas. Front. Earth Sci. 12:1433729. doi: 10.3389/feart.2024.1433729

Received: 16 May 2024; Accepted: 16 May 2024;
Published: 21 May 2024.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2024 Frontiers Editorial Office. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Frontiers Editorial Office, research.integrity@frontiersin.org

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.