AUTHOR=Nath Sankar Kumar , Biswas Arpita , Srivastava Anand , Sengupta Arnab , Ghatak Chitralekha , Madan Jyothula TITLE=Site-specific seismic hazard and risk potential of Bengal Basin with emphasis on holistic seismic hazard microzonation and its structural impact assessment in the cities of Dhanbad and Mymensingh JOURNAL=Frontiers in Earth Science VOLUME=10 YEAR=2022 URL=https://www.frontiersin.org/journals/earth-science/articles/10.3389/feart.2022.959108 DOI=10.3389/feart.2022.959108 ISSN=2296-6463 ABSTRACT=

The Bengal Basin located in the eastern part of the Indian subcontinent at the conjunction of the Eurasian, Indian, and Indo-Burma plates with two progressing deformation fronts viz. the Himalayas and the Indo-Burmese orogenic belts is one of the largest fluvio-deltaic to shallow marine sedimentary basin covered by alluvial plains of Holocene deposits extending from the Himalayas to the Bay of Bengal over thick younger alluvium comprising shallow layers of silt, clay, and sand that can have disastrous consequences due to site-specific ground motion amplification and liquefaction effects. The basin surrounded by Shillong and Assam plateaus in the Northeast is in the active tectonofabric of major active faults and lineaments triggering many devastating earthquakes in the past implicating the MM Intensity of VIII–XI in the near-source region causing widespread damage and destruction in the basin, thus bringing in the essence of assessing surface level seismic hazard and the risk imposed on the basin. Consideration of seismicity patterns, fault networks, and similarity in focal mechanisms yielded 49 areal seismogenic sources and additional active tectonic features in the 0–25 km, 25–70 km, and 70–180 km hypocentral depth ranges, which along with 14 ground motion prediction equations that include site-specific next generation spectral attenuation models pertaining to Northeast India, East-Central Himalaya, and Bengal Basin tectonic provinces yielded probabilistic peak ground acceleration (PGA) at engineering bedrock in the range of 0.08–0.58 g. Both the geophysical and geotechnical investigations at 6,000 sites provided effective shear wave velocity distribution in the range of 113–948 m/s on the geographical information system, thus classifying the basin into 11 site classes with “None” to “Severe” liquefaction hazard potential. A systematic non-linear/equivalent linear site response analysis and its spectral convolution with firm rock peak ground acceleration yielded surface-consistent hazard in the range of 0.09–1.17 g, thus opening up the issue of risk assessment and holistic seismic hazard microzonation of all the cities in the basin and their structural impact assessment using the SELENA-based capacity spectrum method on FEMA and BMTPC-regulated 11 model building types in the damage states of “none,” “slight,” “moderate,” “extensive,” and “complete” for all of those, however, in-depth studies carried out for Mymensingh and Dhanbad have been presented.