AUTHOR=Sun Wen-Tie , Lou Yi-Shan , Kamgue Lenwoue Arnaud Regis , Li Zhong-Hui , Zhu Liang , Wu Hui-Mei TITLE=Classification and Evaluation of Volcanic Rock Reservoirs Based on the Constraints of Energy Storage Coefficient JOURNAL=Frontiers in Earth Science VOLUME=10 YEAR=2022 URL=https://www.frontiersin.org/journals/earth-science/articles/10.3389/feart.2022.914383 DOI=10.3389/feart.2022.914383 ISSN=2296-6463 ABSTRACT=

The current classification and evaluation methods of volcanic rock reservoirs have low accuracy and cannot effectively provide guidance for the selection of volcanic rock gas reservoirs, which have efficient properties for gas production. In this research, we have analyzed the lithology, lithofacies, reservoir space type, pore combination mode, and reservoir microscopic characteristics of volcanic reservoirs using the energy storage coefficient as a constraint. Then, the method of reservoir classification was proposed. The results showed the following: 1) The energy storage coefficient can better characterize the single-layer productivity of gas wells. The volcanic rock reservoirs in the Wangfu gas field can be subdivided into three categories by considering the energy storage coefficient. 2) Type I reservoirs mainly develop structural fractures–matrix dissolution pores, structural fractures–intercrystalline micropores, and matrix dissolution pores. Type II reservoirs mainly develop matrix dissolution pores and residual intergranular pores, and Type III reservoirs are dominated by structural fractures. From Type I to Type III reservoirs, the skewness of the mercury intrusion curve and the sorting coefficient deteriorated, and the physical properties of the reservoir and the maximum mercury saturation and other parameters also decreased, whereas the displacement pressure and the median saturation pressure increased. 3) The characteristics of conventional and special logging curves of typical reservoirs were comprehensively analyzed, and the combination of sensitivity parameters reflecting gas-bearing properties and logging curves was optimized. Furthermore, a reservoir classification chart was established, and the results enabled to confirm the choice of the reservoir and demonstrated that the standard classification has high accuracy. 4) The diagenesis processes such as weathering, leaching, and dissolution improved the physical properties of the reservoir. The research results can effectively provide guidance for the evaluation of the “sweet spot” of volcanic rock reservoirs.