AUTHOR=Aoyama Chiharu , Maeda Nidomu TITLE=Proposed Methodology to Quantify the Amount of Methane Seepage by Understanding the Correlation Between Methane Plumes and Originating Seeps JOURNAL=Frontiers in Earth Science VOLUME=9 YEAR=2021 URL=https://www.frontiersin.org/journals/earth-science/articles/10.3389/feart.2021.589399 DOI=10.3389/feart.2021.589399 ISSN=2296-6463 ABSTRACT=

In recent years, discoveries of methane plumes (also called methane flares) have been reported in various sea areas around the world. Clusters of naturally seeping methane bubbles rising from the seafloor are visualized as methane plumes on the echograms of quantitative echo sounders and multibeam sonars. In order to determine if seeping methane can be used as energy resources and its environmental impact, it is necessary to estimate the amount of naturally seeping methane. From April, 2020, a 3-year project is being conducted in Japan to evaluate the amount of methane seepage from methane plumes. The authors propose the following steps to quantify the amount of methane seepage accurately. First of all, methane plumes in the Exclusive Economic Zone (EEZ) of Japan are mapped out using acoustic devices such as quantitative echo sounders and multibeam sonars. Secondly, methane bubbles of a few millimeters in diameter from methane seeps at seafloor are collected and sampled using a cone-shaped collector with 20 cm in diameter, operated by Remotely Operated Vehicle (ROV). If we can identify the number of seep mouths that form into one single plume, we will be able to quantify the methane seepage from one plume. Based on this result, calibration of the mean backscattering strength and the amount of seeping methane from methane plumes becomes possible and will be applied to the mapped plumes in order to estimate the methane seepage in the EEZ of Japan. Once this calibration is established, it can be applied to the methane plumes observed worldwide, and methane seepage can be quantified simply by acoustic observations of methane plumes. In this study, a method to verify the correlation between methane plumes and methane seeps is introduced, as well as a method to locate methane seeps effectively using the Target Position function of a quantitative echo sounder. The authors intend to use this as the basic data for establishing a method to estimate the amount of methane released from a methane plume by observing the methane plume acoustically.