José C. S. dos Santos
Namasivayam Dhenadhayalan
Yanwei Li
Jose Luis Pinilla- 1Instituto de Engenharias e Desenvolvimento Sustentável, Universidade da Integração Internacional da Lusofonia Afro-Brasileira, Redenção, CE, Brazil
- 2Department of Chemistry, National Taiwan University, Taipei, Taiwan
- 3Environment Research Institute, Shandong University, Qingdao, China
- 4Instituto de Carboquímica-CSIC, Zaragoza, Spain
Editorial on the Research Topic
Chemical reactions and catalysis for a sustainable future
Developing catalytic chemical processes for a sustainable future is a constant challenge involving different knowledge áreas (Sakakura et al., 2007; Yang et al., 2013; Götz et al., 2016; Tian et al., 2023; Yu et al., 2023). It requires multidisciplinary actions that include economic sectors, industry, society, and the environment (Lee et al., 2006; Corma et al., 2007; Naik et al., 2010; Ferreira Mota et al., 2022; Tafete and Habtu, 2023). Furthermore, catalytic chemical processes require constant evaluation to achieve greater sustainability, mainly when applied in industries or on a domestic scale (Chheda et al., 2007; Khodakov et al., 2007; Oh et al., 2016; Deng et al., 2023). Indeed, chemical catalysis is inherent in developing a sustainable future (Kondratenko et al., 2013; Deng et al., 2023). Chemical reactions are inseparable from our subject since they are applied in different processes, such as the preparation of fuels, food, drugs, and energy (Arcadi, 2008; Lima et al., 2022; Moreira et al., 2022; Sales et al., 2022; de Sousa et al., 2023; Faizan and Song, 2023; Nogueira et al., 2023).
In this context, we include scientific research to help make these processes more sustainable. Moreover, consequently, it reduce the negative impact on the environment (Wang et al., 2023a; Zhu et al., 2023). Regarding chemical catalysis, reducing the amount of energy involved in the processes is fundamental (Roy et al., 2010; Yang et al., 2023a; Nogueira et al., 2023). This has a positive impact on reducing the use of polluting energy sources so that these systems can happen, such as the use of petroleum-derived fuels (Torborg and Beller, 2009; Catumba et al., 2023; Jafarian et al., 2023; Park and Kim, 2023). Furthermore, the greater need to use high temperature and pressure conditions increases energy consumption and, consequently, the production of waste that pollutes the environment (Singh et al., 2018; Djandja et al., 2023). Thus, chemical catalysis must seek to reduce the energy required for these processes, for example, in the design of robust catalysts (Yang et al., 2023b); The design of robust catalysts for industrial applications can be presented in different physical states, such as solid, liquid, or gaseous (Mariscal et al., 2016; Ferreira Mota et al., 2022; Issaka et al., 2023). The principle of sustainable functioning of these catalysts must include the formation of desired products (Centi et al., 2013). Be highly efficient in guiding molecules of reagents to the formation of desired products and eliminating the generation of unwanted waste (Li et al., 2023a; Li et al., 2023b). Another crucial factor for the design of sustainable catalysts must include their stabilization power, that is, whether the catalyst can be used repeatedly in the same reused process, minimizing the formation of polluting species and being economically viable (Centi et al., 2013; Wang et al., 2023b). In this way, the formation of sustainable reaction processes is the realization of catalytic systems on a large scale (Abbas-Abadi et al., 2023; Abuzeyad et al., 2023). This strategy makes it possible to reduce energy and polluting waste generated in the environment (Zhao et al., 2023). This fact also implies a decrease in energy use from oil and contributes to green chemistry practices (Goyal et al., 2008; Akram et al., 2023).
Therefore, catalysis is different in advancing clean, renewable, and consequently sustainable technologies (Waseem et al., 2023; Zhang et al., 2023). In this context, catalysis is fundamental in producing fuel cells, which convert chemical energy into electrical energy in an environmentally sustainable way (Zhao et al., 2015; Gong et al., 2023). Likewise, catalysis is fundamental in producing biofuels from renewable sources such as biomass (Li et al., 2023c; Jiang et al., 2023; Yu et al., 2023).
Scientific research to design catalytic, environmentally sustainable, and efficient chemical processes advances today. In this context, the work by Wang et al. (2023a) (Wang et al.) developed prepared WxCeMnOδ/3DOM ZrTiO4 catalysts with application possibilities for the simultaneous elimination of soot particulate matter and oxides of nitrogen from diesel engine exhaust, considering its characteristics such as ease of preparation, reduced costs, and high catalytic activity (Wang et al.). The prepared materials were analyzed, and the results showed high catalytic and structural activity. This high catalytic power is justified by its perfect structure, abundant acid sites, large surface area, and the synergistic effect between the active components. The prepared catalyst, W1CeMnOδ/3DOM ZrTiO4 exhibited overall thermal stability (250°C–396°C) at the lowest temperature for 90% NO conversion but also had the highest NO conversion rate (52%) at the combustion temperature of soot (Wang et al.).
The reduction of greenhouse gas emissions is a constant concern. This fact contributes to developing efficient catalytic processors that collaborate to reduce these effects. In this context, the work by Santiago et al. presented a proposal to convert CO2 into valuable chemicals, such as methanol (MeOH) and dimethyl ether (DME), by the medium of catalytic hydrogenation in catalysts based on Cu, Zn, and Al (Santiago et al.). In this approach, the researchers demonstrated insights into the reaction mechanism provided by the CO2 and H2 adsorption isotherms on the catalysts. The catalytic activity, conversion, and yields studied were correlated with the adsorption capacity of the reagents, which was verified under conditions of temperature and pressure close to the conditions of the hydrogenation reaction. Therefore, a new approach can be used to evaluate and assist in developing new catalysts (Santiago et al.).
Enzymes are suitable candidates for sustainable catalytic process applications (Bonazza et al., 2018; Moreira et al., 2020; Velasco-Lozano et al., 2022). Enzymes have unique catalytic behavior and are widely studied in different catalysis processes (dos Santos et al., 2014; Kurbanoglu et al., 2020; Virgen-Ortíz et al., 2019). Enzymes can act in different types of reactions of industrial interest, such as esterification, transesterification, C-C bond formation, and alcoholysis (Belle and Nijnik, 2014; Prajapati et al., 2022; Liu et al.; González-Davis et al., 2023; Plouhinec et al., 2023; Yamaguchi and Miyazaki, 2023).
Enzymes are used in different industrial processes, which include dairy products (cheese recovery, flavor enhancement, and enzyme-modified cheese (EMC) production), pharmaceuticals (ibuprofen, naproxen), detergents, agricultural products (pesticides, insects), chemicals, oil chemistry (fats and oil hydrolysis and synthesis of biodetergents) (Villalba et al., 2016; Brandão Júnior et al., 2023; Ghattavi and Homaei, 2023; Issaka et al., 2023; Narayanan et al., 2023). Due to their specific properties, in addition to adjusting the reaction conditions of interest, enzymes can be used to replace chemical catalysts. In this context, the modification process of enzymatic functions can happen through alteration of their amino acid residues, side chains, and domain modifications (Biswas et al.). In studies by Biswas et al.), the role of residue modification in the catalytic activity and molecular recognition of an alpha-chymotrypsin (CHT) enzyme in the presence of a formalin covalent crosslinker was performed. The results revealed a reduced catalytic activity after increasing the formalin concentration (Biswas et al.). However, the findings presented in the work of (Biswas et al.) may, in the future, offer information on drug-target interaction, molecular recognition, and macromolecular modification to generate new binding sites for enhanced ligand binding through DNA engineering proteins (Biswas et al.).
Molecular hydrogen (H2) is receiving much attention these days as the primary sustainable fuel in different applications in the future. One of the molecular hydrogen production routes involves using precious metal catalysts. The work by Kaim et al. sought to develop alternative non-precious metal catalysts for hydrogen generation, for example, replacing platinum. In the study, the enzyme hydrogenase was used as a model. These studies with manganese catalysts expand the diversity of elements in the periodic table that are favorable to catalyze the hydrogen evolution reaction (Kaim et al.). With this, Kaim et al. opened a new space for further studies on sustainable hydrogen production since the introduction of manganese as an additional metal atom abundant on Earth in the series of mononuclear hydrogen generator catalysts (in addition to Fe, Co., Ni, and Ru). Furthermore, Manganese’s characteristics, including low cost, abundant availability, and a benign environmental profile, make it an exciting candidate for hydrogen (Kaim et al.).
Elucidating the function and catalytic details of enzymes is vital to provide a comprehensive understanding of reaction processes and thereby optimize systems. In order to achieve this goal the studies of Liu et al. (2023b) (Liu et al., 2023b) the state-of-the-art quantum mechanics/molecular mechanics (QM/MM MD) simulation of Born- Oppenheimer was used to systematically understand the mechanism of deAMPylation of AMPylated BiP catalyzed by the enzyme FICD (filamentation induced by cAMP domain protein, also known as HYPE) in detail. The studies were able to show that the transfer of protons from the protonated histidine (His363) in FICD to the AMPylated threonine (Thr518) in BiP initiates the deAMPylation process, instead of the general point of view that refers to a nucleophilic attack of water molecules adding to AMP phosphorus (Liu et al.) (Liu et al., 2023b). Furthermore, it was revealed that the crucial AMPylation inhibitor Glu234, which proved to be essential in the process of bacterial deAMPylation, is possible to alter in mammals (Liu et al.) (Liu et al., 2023b). This research sheds more light on understanding the physiological role of FICD protein and PTMs (posttranslational modifications) (Liu et al.).
This Research Topic covers promising and recent trends in Chemical Reactions and Catalysis for a Sustainable Future. In this opportunity, authors present contributions with original research articles, mini and full reviews, and papers on related Research Topic (Velasco-Lozano et al., 2022). Areas to be covered in the Research Topic include Homogenous catalysts, Heterogenous catalysts, Sustainable alternatives to non-earth great, toxic, and expensive metal catalysts, and catalysis for environmental applications. Essential information is presented here so that researchers can refine their studies in the search for routes with Chemical Reactions and Catalysis for a Sustainable Future. We would like to thank all authors, reviewers, and members of the Editorial Board for their considerable contributions to support the implementation of this special Research Topic.
Author contributions
JS, ND, YL, and JP drafted the Editorial. All authors contributed to the article and approved the submitted version.
Acknowledgments
The authors are thankful to the contributors to this Research Topic as well as the Editorial support of the Journal.
Conflict of interest
The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
Publisher’s note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
References
Abbas-Abadi, M. S., Ureel, Y., Eschenbacher, A., Vermeire, F. H., Varghese, R. J., Oenema, J., et al. (2023). Challenges and opportunities of light olefin production via thermal and catalytic pyrolysis of end-of-life polyolefins: Towards full recyclability. Prog. Energy Combust. Sci. 96, 101046. doi:10.1016/j.pecs.2022.101046
Abuzeyad, O. H., El-Khawaga, A. M., Tantawy, H., and Elsayed, M. A. (2023). An evaluation of the improved catalytic performance of rGO/GO-hybrid-nanomaterials in photocatalytic degradation and antibacterial activity processes for wastewater treatment: A review. J. Mol. Struct. 1288, 135787. doi:10.1016/j.molstruc.2023.135787
Akram, H. A., Imran, M., Javaid, A., Latif, S., Rizvi, N. B., Jesionowski, T., et al. (2023). Pretreatment and catalytic conversion of lignocellulosic and algal biomass into biofuels by metal organic frameworks. Mol. Catal. 539, 112893. doi:10.1016/j.mcat.2022.112893
Arcadi, A. (2008). Alternative synthetic methods through new developments in catalysis by gold. Chem. Rev. 108 (8), 3266–3325. doi:10.1021/cr068435d
Belle, J. I., and Nijnik, A. (2014). H2A-DUBbing the mammalian epigenome: Expanding frontiers for histone H2A deubiquitinating enzymes in cell biology and physiology. Int. J. Biochem. Cell. Biol. 50, 161–174. doi:10.1016/j.biocel.2014.03.004
Bonazza, H. L., Manzo, R. M., dos Santos, J. C. S., and Mammarella, E. J. (2018). Operational and thermal stability analysis of thermomyces lanuginosus lipase covalently immobilized onto modified chitosan supports. Appl. Biochem. Biotechnol. 184 (1), 182–196. doi:10.1007/s12010-017-2546-9
Brandão Júnior, J., Andrade do Nascimento, J. G., França Silva, M. P., Lima Brandão, E. A., de Castro Bizerra, V., dos Santos, K. M., et al. (2023). Performance of eversa transform 2.0 lipase in ester production using babassu oil (orbignya sp) and tucuman oil (astrocaryum vulgar): A comparative study between liquid and immobilized forms in Fe3O4 nanoparticles. Catalysts 13 (3), 571. doi:10.3390/catal13030571
Catumba, B. D., Sales, M. B., Borges, P. T., Ribeiro Filho, M. N., Lopes, A. A. S., Sousa Rios, M. A., et al. (2023). Sustainability and challenges in hydrogen production: An advanced bibliometric analysis. Int. J. Hydrogen Energy 48 (22), 7975–7992. doi:10.1016/j.ijhydene.2022.11.215
Centi, G., Quadrelli, E. A., and Perathoner, S. (2013). Catalysis for CO2 conversion: A key technology for rapid introduction of renewable energy in the value chain of chemical industries. Energy and Environ. Sci. 6 (6), 1711. doi:10.1039/c3ee00056g
Chheda, J. N., Huber, G. W., and Dumesic, J. A. (2007). Liquid-phase catalytic processing of biomass-derived oxygenated hydrocarbons to fuels and chemicals. Angew. Chem. Int. Ed. 46 (38), 7164–7183. doi:10.1002/anie.200604274
Corma, A., Iborra, S., and Velty, A. (2007). Chemical routes for the transformation of biomass into chemicals. Chem. Rev. 107 (6), 2411–2502. doi:10.1021/cr050989d
de Sousa, I. G., Mota, G. F., Cavalcante, A. L. G., Rocha, T. G., da Silva Sousa, P., Holanda Alexandre, J. Y. N., et al. (2023). Renewable processes of synthesis of biolubricants catalyzed by lipases. J. Environ. Chem. Eng. 11 (1), 109006. doi:10.1016/j.jece.2022.109006
Deng, W., Feng, Y., Fu, J., Guo, H., Guo, Y., Han, B., et al. (2023). Catalytic conversion of lignocellulosic biomass into chemicals and fuels. Green Energy and Environ. 8 (1), 10–114. doi:10.1016/j.gee.2022.07.003
Djandja, O. S., Liew, R. K., Liu, C., Liang, J., Yuan, H., He, W., et al. (2023). Catalytic hydrothermal carbonization of wet organic solid waste: A review. Sci. Total Environ. 873, 162119. doi:10.1016/j.scitotenv.2023.162119
dos Santos, J. C. S., Garcia-Galan, C., Rodrigues, R. C., de Sant’Ana, H. B., Gonçalves, L. R. B., and Fernandez-Lafuente, R. (2014). Stabilizing hyperactivated lecitase structures through physical treatment with ionic polymers. Process Biochem. 49 (9), 1511–1515. doi:10.1016/j.procbio.2014.05.009
Faizan, M., and Song, H. (2023). Critical review on catalytic biomass gasification: State-of-Art progress, technical challenges, and perspectives in future development. J. Clean. Prod. 408, 137224. doi:10.1016/j.jclepro.2023.137224
Ferreira Mota, G., Germano de Sousa, I., Luiz Barros de Oliveira, A., Luthierre Gama Cavalcante, A., da Silva Moreira, K., Thálysson Tavares Cavalcante, F., et al. (2022). Biodiesel production from microalgae using lipase-based catalysts: Current challenges and prospects. Algal Res. 62, 102616. doi:10.1016/j.algal.2021.102616
Ghattavi, S., and Homaei, A. (2023). Marine enzymes: Classification and application in various industries. Int. J. Biol. Macromol. 230, 123136. doi:10.1016/j.ijbiomac.2023.123136
Gong, P., He, F., Xie, J., and Fang, D. (2023). Catalytic removal of toluene using MnO2-based catalysts: A review. Chemosphere 318, 137938. doi:10.1016/j.chemosphere.2023.137938
González-Davis, O., Villagrana-Escareño, M. V., Trujillo, M. A., Gama, P., Chauhan, K., and Vazquez-Duhalt, R. (2023). Virus-like nanoparticles as enzyme carriers for enzyme replacement therapy (ERT). Virology 580, 73–87. doi:10.1016/j.virol.2023.01.017
Götz, M., Lefebvre, J., Mörs, F., McDaniel Koch, A., Graf, F., Bajohr, S., et al. (2016). Renewable power-to-gas: A technological and economic review. Renew. Energy 85, 1371–1390. doi:10.1016/j.renene.2015.07.066
Goyal, H. B., Seal, D., and Saxena, R. C. (2008). Bio-fuels from thermochemical conversion of renewable resources: A review. Renew. Sustain. Energy Rev. 12 (2), 504–517. doi:10.1016/j.rser.2006.07.014
Issaka, E., Wariboko, M. A., Mohammed, A., Enyan, M., and Aguree, S. (2023). Trends in enzyme mimics for enhanced catalytic cascade systems for bio-sensing of environmental pollutants -A review. Chem. Eng. J. Adv. 2023, 100510. doi:10.1016/j.ceja.2023.100510
Jafarian, M., Haseli, P., Saxena, S., and Dally, B. (2023). Emerging technologies for catalytic gasification of petroleum residue derived fuels for sustainable and cleaner fuel production—an overview. Energy Rep. 9, 3248–3272. doi:10.1016/j.egyr.2023.01.116
Jiang, Y., Li, Z., Li, Y., Chen, L., Zhang, H., Li, H., et al. (2023). Recent advances in sustainable catalytic production of 5-methyl-2-pyrrolidones from bio-derived levulinate. Fuel 334, 126629. doi:10.1016/j.fuel.2022.126629
Khodakov, A. Y., Chu, W., and Fongarland, P. (2007). Advances in the development of novel cobalt Fischer−Tropsch catalysts for synthesis of long-chain hydrocarbons and clean fuels. Chem. Rev. 107 (5), 1692–1744. doi:10.1021/cr050972v
Kondratenko, E. V., Mul, G., Baltrusaitis, J., Larrazábal, G. O., and Pérez-Ramírez, J. (2013). Status and perspectives of CO2 conversion into fuels and chemicals by catalytic, photocatalytic and electrocatalytic processes. Energy and Environ. Sci. 6 (11), 3112. doi:10.1039/c3ee41272e
Kurbanoglu, S., Erkmen, C., and Uslu, B. (2020). Frontiers in electrochemical enzyme based biosensors for food and drug analysis. TrAC Trends Anal. Chem. 124, 115809. doi:10.1016/j.trac.2020.115809
Lee, J., Kim, J., and Hyeon, T. (2006). Recent progress in the synthesis of porous carbon materials. Adv. Mater. 18 (16), 2073–2094. doi:10.1002/adma.200501576
Li, S., Shi, J., Liu, S., Li, W., Chen, Y., Shan, H., et al. (2023a). Molecule-electron-proton transfer in enzyme-photo-coupled catalytic system. Chin. J. Catal. 44, 96–110. doi:10.1016/S1872-2067(22)64154-8
Li, S., Wang, J., Zhang, T., Yang, S., Sun, M., Qian, X., et al. (2023c). Sustainable catalytic strategies for the transformation of plastic wastes into valued products. Chem. Eng. Sci. 276, 118729. doi:10.1016/j.ces.2023.118729
Li, S., Yu, Q., Barzagli, F., Li, C., Che, M., Zhang, Z., et al. (2023b). Energy efficient catalytic CO2 desorption: Mechanism, technological progress and perspective. Carbon Capture Sci. Technol. 6, 100099. doi:10.1016/j.ccst.2023.100099
Lima, P. J. M., da Silva, R. M., Neto, C. A. C. G., Gomes e Silva, N. C., Souza, J. E., Nunes, Y. L., et al. (2022). An overview on the conversion of glycerol to value-added industrial products via chemical and biochemical routes. Biotechnol. Appl. Biochem. 69 (6), 2794–2818. doi:10.1002/bab.2098
Liu, M., Kuzuya, A., and Wang, Z.-G. (2023b). Supramolecular enzyme-mimicking catalysts self-assembled from peptides. IScience 26 (1), 105831. doi:10.1016/j.isci.2022.105831
Mariscal, R., Maireles-Torres, P., Ojeda, M., Sádaba, I., and López Granados, M. (2016). Furfural: A renewable and versatile platform molecule for the synthesis of chemicals and fuels. Energy and Environ. Sci. 9 (4), 1144–1189. doi:10.1039/C5EE02666K
Moreira, K. S., Barros de Oliveira, A. L., Saraiva de Moura Júnior, L., Germano de Sousa, I., Luthierre Gama Cavalcante, A., Simão Neto, F., et al. (2022). Taguchi design-assisted co-immobilization of lipase A and B from Candida Antarctica onto chitosan: Characterization, kinetic resolution application, and docking studies. Chem. Eng. Res. Des. 177, 223–244. doi:10.1016/j.cherd.2021.10.033
Moreira, K. S., Moura Júnior, L. S., Monteiro, R. R. C., de Oliveira, A. L. B., Valle, C. P., Freire, T. M., et al. (2020). Optimization of the production of enzymatic biodiesel from residual babassu oil (orbignya sp) via RSM. Catalysts 10 (4), 414. doi:10.3390/catal10040414
Naik, S. N., Goud, V. V., Rout, P. K., and Dalai, A. K. (2010). Production of first and second generation biofuels: A comprehensive review. Renew. Sustain. Energy Rev. 14 (2), 578–597. doi:10.1016/j.rser.2009.10.003
Narayanan, M., Ali, S. S., and El-Sheekh, M. (2023). A comprehensive review on the potential of microbial enzymes in multipollutant bioremediation: Mechanisms, challenges, and future prospects. J. Environ. Manag. 334, 117532. doi:10.1016/j.jenvman.2023.117532
Nogueira, R. C., Neto, F. S., Junior, P. G., Valério, R. B. R., Serpa, J., Lima, A. M., et al. (2023). Research trends and perspectives on hydrothermal gasification in producing biofuels. Energy Nexus 10, 100199. doi:10.1016/j.nexus.2023.100199
Oh, W.-D., Dong, Z., and Lim, T.-T. (2016). Generation of sulfate radical through heterogeneous catalysis for organic contaminants removal: Current development, challenges and prospects. Appl. Catal. B Environ. 194, 169–201. doi:10.1016/j.apcatb.2016.04.003
Park, Y.-K., and Kim, B.-S. (2023). Catalytic removal of nitrogen oxides (NO, NO2, N2O) from ammonia-fueled combustion exhaust: A review of applicable technologies. Chem. Eng. J. 461, 141958. doi:10.1016/j.cej.2023.141958
Plouhinec, L., Neugnot, V., Lafond, M., and Berrin, J.-G. (2023). Carbohydrate-active enzymes in animal feed. Biotechnol. Adv. 65, 108145. doi:10.1016/j.biotechadv.2023.108145
Prajapati, S., Rabe von Pappenheim, F., and Tittmann, K. (2022). Frontiers in the enzymology of thiamin diphosphate-dependent enzymes. Curr. Opin. Struct. Biol. 76, 102441. doi:10.1016/j.sbi.2022.102441
Roy, S. C., Varghese, O. K., Paulose, M., and Grimes, C. A. (2010). Toward solar fuels: Photocatalytic conversion of carbon dioxide to hydrocarbons. ACS Nano 4 (3), 1259–1278. doi:10.1021/nn9015423
Sakakura, T., Choi, J.-C., and Yasuda, H. (2007). Transformation of carbon dioxide. Chem. Rev. 107 (6), 2365–2387. doi:10.1021/cr068357u
Sales, M. B., Borges, P. T., Ribeiro Filho, M. N., Miranda da Silva, L. R., Castro, A. P., Sanders Lopes, A. A., et al. (2022). Sustainable feedstocks and challenges in biodiesel production: An advanced bibliometric analysis. Bioengineering 9 (10), 539. doi:10.3390/bioengineering9100539
Singh, J., Dutta, T., Kim, K.-H., Rawat, M., Samddar, P., and Kumar, P. (2018). ‘Green’ synthesis of metals and their oxide nanoparticles: Applications for environmental remediation. J. Nanobiotechnology 16 (1), 84. doi:10.1186/s12951-018-0408-4
Tafete, G. A., and Habtu, N. G. (2023). Reactor configuration, operations and structural catalyst design in process intensification of catalytic reactors: A review. Chem. Eng. Process. - Process Intensif. 184, 109290. doi:10.1016/j.cep.2023.109290
Tian, Q., Xu, P., Huang, D., Wang, H., Wang, Z., Qin, H., et al. (2023). The driving force of biomass value-addition: Selective catalytic depolymerization of lignin to high-value chemicals. J. Environ. Chem. Eng. 11 (3), 109719. doi:10.1016/j.jece.2023.109719
Torborg, C., and Beller, M. (2009). Recent applications of palladium-catalyzed coupling reactions in the pharmaceutical, agrochemical, and fine chemical industries. Adv. Synthesis Catal. 351 (18), 3027–3043. doi:10.1002/adsc.200900587
Velasco-Lozano, S., Rocha-Martin, J., and Santosdos, J. C. S. (2022). Editorial: Designing carrier-free immobilized enzymes for biocatalysis. Front. Bioeng. Biotechnol. 10, 924743. doi:10.3389/fbioe.2022.924743
Villalba, M., Verdasco-Martín, C. M., dos Santos, J. C. S., Fernandez-Lafuente, R., and Otero, C. (2016). Operational stabilities of different chemical derivatives of Novozym 435 in an alcoholysis reaction. Enzyme Microb. Technol. 90, 35–44. doi:10.1016/j.enzmictec.2016.04.007
Virgen-Ortíz, J. J., dos Santos, J. C. S., Ortiz, C., Berenguer-Murcia, Á., Barbosa, O., Rodrigues, R. C., et al. (2019). Lecitase ultra: A phospholipase with great potential in biocatalysis. Mol. Catal. 473, 110405. doi:10.1016/j.mcat.2019.110405
Wang, F., Gao, Y., Liu, S.-S., Yi, X.-H., Wang, C.-C., and Fu, H. (2023a). Fabrication strategies of metal–organic frameworks derivatives for catalytic aqueous pollutants elimination. Chem. Eng. J. 463, 142466. doi:10.1016/j.cej.2023.142466
Wang, F., Zhu, C., and Li, D. (2023b). Visualizing enzyme catalytic process using single-molecule techniques. TrAC Trends Anal. Chem. 163, 117083. doi:10.1016/j.trac.2023.117083
Waseem, M., Al-Marzouqi, M., and Ghasem, N. (2023). A review of catalytically enhanced CO2-rich amine solutions regeneration. J. Environ. Chem. Eng. 2023, 110188. doi:10.1016/j.jece.2023.110188
Yamaguchi, H., and Miyazaki, M. (2023). Enzyme-immobilized microfluidic devices for biomolecule detection. TrAC Trends Anal. Chem. 159, 116908. doi:10.1016/j.trac.2022.116908
Yang, W. W., Ma, X., Tang, X.-Y., Dou, P.-Y., Yang, Y.-J., and He, Y.-L. (2023a). Review on developments of catalytic system for methanol steam reforming from the perspective of energy-mass conversion. Fuel 345, 128234. doi:10.1016/j.fuel.2023.128234
Yang, W. W., Xu, X., He, H., Huo, D., Li, X., Dai, L., et al. (2023b). The catalytic hydrodeoxygenation of bio-oil for upgradation from lignocellulosic biomass. Int. J. Biol. Macromol. 242, 124773. doi:10.1016/j.ijbiomac.2023.124773
Yang, X.-F., Wang, A., Qiao, B., Li, J., Liu, J., and Zhang, T. (2013). Single-atom catalysts: A new frontier in heterogeneous catalysis. Accounts Chem. Res. 46 (8), 1740–1748. doi:10.1021/ar300361m
Yu, S., Xiang, T., Alharbi, N. S., Al-aidaroos, B. A., and Chen, C. (2023). Recent development of catalytic strategies for sustainable ammonia production. Chin. J. Chem. Eng. 2023, 28. doi:10.1016/j.cjche.2023.03.028
Zhang, K., Chen, Y., Song, L., and Cai, L. (2023). Progress of catalytic mitsunobu reaction in the two decades. Asian J. Org. Chem. 12 (2), 707. doi:10.1002/ajoc.202200707
Zhao, Z., Ma, S., Gao, B., Bi, F., Qiao, R., Yang, Y., et al. (2023). A systematic review of intermediates and their characterization methods in VOCs degradation by different catalytic technologies. Sep. Purif. Technol. 314, 123510. doi:10.1016/j.seppur.2023.123510
Zhao, Z., Sun, Y., and Dong, F. (2015). Graphitic carbon nitride based nanocomposites: A review. Nanoscale 7 (1), 15–37. doi:10.1039/C4NR03008G
Keywords: chemical reactions, catalysis, sustainable future, Research Topic, editorial
Citation: Santos JCSd, Dhenadhayalan N, Li Y and Pinilla JL (2023) Editorial: Chemical reactions and catalysis for a sustainable future. Front. Chem. 11:1228591. doi: 10.3389/fchem.2023.1228591
Received: 25 May 2023; Accepted: 26 May 2023;
Published: 02 June 2023.
Edited and reviewed by:
Tomas Ramirez Reina, University of Seville, SpainCopyright © 2023 Santos, Dhenadhayalan, Li and Pinilla. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: José C. S. dos Santos, amNzQHVuaWxhYi5lZHUuYnI=; Namasivayam Dhenadhayalan, bmRoZW5hQGdtYWlsLmNvbQ==; Yanwei Li, bHl3QHNkdS5lZHUuY24=; Jose Luis Pinilla, amxwaW5pbGxhQGljYi5jc2ljLmVz