Skip to main content

ERRATUM article

Front. Chem., 17 March 2023
Sec. Electrochemistry
Volume 11 - 2023 | https://doi.org/10.3389/fchem.2023.1182159

Erratum: Porous adsorption materials for carbon dioxide capture in industrial flue gas

This article is an erratum on:

  1. Porous Adsorption Materials for Carbon Dioxide Capture in Industrial Flue Gas

    1. Read original article
Frontiers Production Office Frontiers Production Office*
  • Frontiers Media SA, Lausanne, Switzerland

An Erratum on
Porous adsorption materials for carbon dioxide capture in industrial flue gas

by Zeng H, Qu X, Xu D and Luo Y (2022). Front. Chem. 10:939701. doi: 10.3389/fchem.2022.939701

An omission to the Funding section of the original article was made in error. The following sentence has been added: “Open access funding was provided by Empa - Swiss Federal Laboratories For Materials Science And Technology.”

The original version of this article has been updated.

Keywords: carbon capture and storage, porous adsorption materials, industrial waste gas, adsorption mechanism, carbon dioxide

Citation: Frontiers Production Office (2023) Erratum: Porous adsorption materials for carbon dioxide capture in industrial flue gas. Front. Chem. 11:1182159. doi: 10.3389/fchem.2023.1182159

Received: 08 March 2023; Accepted: 08 March 2023;
Published: 17 March 2023.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2023 Frontiers Production Office. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Frontiers Production Office, production.office@frontiersin.org

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.