AUTHOR=Campbell Stephen , Phillips Laurie J. , Major Jonathan D. , Hutter Oliver S. , Voyce Ryan , Qu Yongtao , Beattie Neil S. , Zoppi Guillaume , Barrioz Vincent TITLE=Routes to increase performance for antimony selenide solar cells using inorganic hole transport layers JOURNAL=Frontiers in Chemistry VOLUME=10 YEAR=2022 URL=https://www.frontiersin.org/journals/chemistry/articles/10.3389/fchem.2022.954588 DOI=10.3389/fchem.2022.954588 ISSN=2296-2646 ABSTRACT=

Simple compound antimony selenide (Sb₂Se₃) is a promising emergent light absorber for photovoltaic applications benefiting from its outstanding photoelectric properties. Antimony selenide thin film solar cells however, are limited by low open circuit voltage due to carrier recombination at the metallic back contact interface. In this work, solar cell capacitance simulator (SCAPS) is used to interpret the effect of hole transport layers (HTL), i.e., transition metal oxides NiO and MoO_x thin films on Sb₂Se₃ device characteristics. This reveals the critical role of NiO and MoO_x in altering the energy band alignment and increasing device performance by the introduction of a high energy barrier to electrons at the rear absorber/metal interface. Close-space sublimation (CSS) and thermal evaporation (TE) techniques are applied to deposit Sb₂Se₃ layers in both substrate and superstrate thin film solar cells with NiO and MoO_x HTLs incorporated into the device structure. The effect of the HTLs on Sb₂Se₃ crystallinity and solar cell performance is comprehensively studied. In superstrate device configuration, CSS-based Sb₂Se₃ solar cells with NiO HTL showed average improvements in open circuit voltage, short circuit current density and power conversion efficiency of 12%, 41%, and 42%, respectively, over the standard devices. Similarly, using a NiO HTL in TE-based Sb₂Se₃ devices improved open circuit voltage, short circuit current density and power conversion efficiency by 39%, 68%, and 92%, respectively.