Pengyu Dong
Fan Dong
Roberto Fiorenza- 1Key Laboratory for Advanced Technology in Environmental Protection of Jiangsu Province, Yancheng Institute of Technology, Yancheng, China
- 2Research Center for Environmental Science and Technology, Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu, China
- 3Department of Chemical Sciences, University of Catania, Catania, Italy
Editorial on the Research Topic
Photocatalysts for Air Purification: Design, Synthesis, and Mechanism Investigation
As air pollution becomes more and more serious in many aspects all over the world, the demand for clean air increases significantly and the development of efficient and environment-friendly air purification technologies is highly encouraged (Kampa and Castanas, 2008; Anwar et al., 2021; Shi et al., 2021; Jbaily et al., 2022).
Among various technologies, photocatalysis is particularly suitable for removing low-concentration air pollutants (e.g., VOCs) at sub-ppm or ppb levels because the conventional adsorption technologies are not very efficient (Boonen and Beeldens, 2014; Yu et al., 2010; Hay et al., 2015; Boyjoo et al., 2017; Ren et al., 2017; Schreck and Niederberger, 2019; Weon et al., 2019). In recent years, much effort has been made to improve the applicability of photocatalytic air purification, such as developing novel photocatalysts for air purification, increasing the optical absorption and charge generation to enhance the photocatalytic activity, and understanding of mechanisms and reactions (Wu and van de Krol, 2012; Dong et al., 2014; Weon and Choi, 2016; Huang et al., 2017; Zhu et al., 2017; Li et al., 2018; Liu et al., 2020; Fiorenza et al., 2022).
Despite the progress made in this field, many issues must be resolved to meet stringent emission standards economically and effectively. Herein, the following aspects are expected to solve problems. 1) Developing efficient photocatalysts with highly exposed reactive facets, abundant defect sites, and strong interfacial interactions to remove the air pollutants, for instance, core-shell-structured materials, hierarchical porous materials, skeleton/channel-confined materials, and single-atom catalytic materials. 2) Designing highly active, universally applicable, and stable photocatalysts with intense resistance to poisons. Indeed, the practical reaction environments are usually very complicated and trace pollutants including water vapor, ammonia, and sulfur-containing compounds may coexist in these streams. 3) Demonstrating how the bond cleavage and oxidation mechanisms of air pollutants are influenced by reaction conditions or times at the molecular level. It can be achieved by applying in situ characterization techniques such as FTIR and highly sensitive real-time monitoring techniques such as proton-transfer reaction−mass spectrometry. 4) Establishing how different catalytically active sites (i.e., redox centers, noble metal active sites, and acidic/basic centers) or the application of multi-catalytic approaches, such as photothermal-catalysis, activate the air pollutants and intermediate species to develop a deeper understanding of desirable properties to aid the future design of photocatalysts for purification of air pollutants. 5) Deriving a greater understanding of the deactivation or poisoning mechanisms of different photocatalysts. This can be achieved by establishing correlations between the surface chemistry of photocatalysts and their catalytic performance and exploring effective regeneration methods for deactivated photocatalysts (in situ regeneration in particular) to reduce operating costs and ultimately increase industrial viability. 6) Exploiting the developments made in the field of molecular modeling, including the use of theoretical calculations and models to simulate mass and heat transfer effects and predict the reaction behavior of given systems/reactors.
In this research topic, we have invited some scientists worldwide to contribute original research and review articles which could enhance our understanding of some of the above issues in photocatalytic air purification. These original articles have been accepted for publication after peer review. Khan et al. designed a full spectrum-induced hybrid structure consisting of one-dimensional nickel titanate (NiTiO3) nanofibers (NFs) decorated with petal-like molybdenum disulfide (MoS2) particles, and the key parameters for tailoring the morphology, porosity, surface, and interfacial properties of the photocatalysts were identified. High CO2 selectivity was ascribed to the improved light harvesting, the abundance of active edges, insertion of multiphase (2H/1T) MoS2, and higher surface area, and partly to the hydrophobic feature of the hybrid structure. He et al. found that the heterojunction photocatalyst containing MoS2 and ordered mesoporous carbon (OMC) showed an enhanced photocatalytic efficiency for formaldehyde decomposition and exhibited an excellent regeneration performance after six recycles, indicating the MoS2/OMC composite is a promising photocatalyst with high activity and stability for VOCs removal. The excellent regeneration performance was ascribed to the unique structure, in which the hollow spherical MoS2 was assembled into an orderly structure of OMC that greatly increased the number of edge active sites and effectively overcame the defect of agglomeration of MoS2 nanomaterials. Qian et al. reviewed the breakthroughs and challenges of metal-organic frameworks (MOFs) as powerful photocatalysts for indoor-air VOCs pollutants cleaning (such as aldehydes, aromatics, and short-chain alcohols). It is considered that the active centers of MOFs photocatalysts could be divided into two categories, in which MOFs with variable valence metal nodes act as direct photoactive centers and MOFs with non-variable valence metal nodes but after combining other photoactive variable valence metal centers act as excellent concentrated and concerted electron-transfer materials. Huang et al. designed a photocatalytic reactor of solar updraft towers (SUT) to remove methane from the air at a planetary scale and presented a deep analysis by calculating the potential of methane removal concerning the dimensions and configuration of SUT using various photocatalysts based on the heat transfer mass and transfer models. It is found that the effectiveness of combining photocatalysis with SUT highly depends on the efficacy of photocatalysts (including the catalyst coating area), the size of SUT, and the exploring night operation strategies.
At last, as the Guest Editors of this research topic, we would like to express our gratitude to all the authors for their contributed articles and thank all the referees for their comments on the manuscripts. We hope that the readers will find the results in the articles on this topic interesting and useful for their research. Finally, we appreciate the editorial staff of Frontiers in Chemistry for their work in publishing this research topic.
Author Contributions
PD: investigation, writing-original draft. FD: conceptualization, writing-review & editing. RF: writing-review & editing.
Conflict of Interest
The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
Publisher’s Note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Acknowledgments
This work is financially supported by the Qinglan Project of Jiangsu Province.
References
Anwar, M. N., Shabbir, M., Tahir, E., Iftikhar, M., Saif, H., Tahir, A., et al. (2021). Emerging Challenges of Air Pollution and Particulate Matter in China, India, and Pakistan and Mitigating Solutions. J. Hazard. Mater. 416, 125851. doi:10.1016/j.jhazmat.2021.125851
Boonen, E., and Beeldens, A. (2014). Recent Photocatalytic Applications for Air Purification in Belgium. Coatings 4, 553–573. doi:10.3390/coatings4030553
Boyjoo, Y., Sun, H., Liu, J., Pareek, V. K., and Wang, S. (2017). A Review on Photocatalysis for Air Treatment: From Catalyst Development to Reactor Design. Chem. Eng. J. 310 (Part 2), 537–559. doi:10.1016/j.cej.2016.06.090
Dong, F., Wang, Z., Li, Y., Ho, W.-K., and Lee, S. C. (2014). Immobilization of Polymeric G-C3n4 on Structured Ceramic Foam for Efficient Visible Light Photocatalytic Air Purification with Real Indoor Illumination. Environ. Sci. Technol. 48, 10345–10353. doi:10.1021/es502290f
Fiorenza, R., Farina, R. A., Malannata, E. M., Lo Presti, F., and Balsamo, S. A. (2022). VOCs Photothermo-Catalytic Removal on MnOx-ZrO2 Catalysts. Catalysts 12, 85. doi:10.3390/catal12010085
Hay, S., Obee, T., Luo, Z., Jiang, T., Meng, Y., He, J., et al. (2015). The Viability of Photocatalysis for Air Purification. Molecules 20, 1319–1356. doi:10.3390/molecules20011319
Huang, Y., Liang, Y., Rao, Y., Zhu, D., Cao, J.-J., Shen, Z., et al. (2017). Environment-Friendly Carbon Quantum Dots/ZnFe2O4 Photocatalysts: Characterization, Biocompatibility, and Mechanisms for NO Removal. Environ. Sci. Technol. 51, 2924–2933. doi:10.1021/acs.est.6b04460
Jbaily, A., Zhou, X., Liu, J., Lee, T.-H., Kamareddine, L., Verguet, S., et al. (2022). Air Pollution Exposure Disparities across US Population and Income Groups. Nature 601, 228–233. doi:10.1038/s41586-021-04190-y
Kampa, M., and Castanas, E. (2008). Human Health Effects of Air Pollution. Environ. Pollut. 151, 362–367. doi:10.1016/j.envpol.2007.06.012
Li, J., Dong, X. a., Sun, Y., Jiang, G., Chu, Y., Lee, S. C., et al. (2018). Tailoring the Rate-Determining Step in Photocatalysis via Localized Excess Electrons for Efficient and Safe Air Cleaning. Appl. Catal. B: Environ. 239, 187–195. doi:10.1016/j.apcatb.2018.08.019
Liu, J., Chen, H., Shi, X., Nawar, S., Werner, J. G., Huang, G., et al. (2020). Hydrogel Microcapsules with Photocatalytic Nanoparticles for Removal of Organic Pollutants. Environ. Sci. Nano 7, 656–664. doi:10.1039/c9en01108k
Ren, H., Koshy, P., Chen, W.-F., Qi, S., and Sorrell, C. C. (2017). Photocatalytic Materials and Technologies for Air Purification. J. Hazard. Mater. 325, 340–366. doi:10.1016/j.jhazmat.2016.08.072
Schreck, M., and Niederberger, M. (2019). Photocatalytic Gas Phase Reactions. Chem. Mater. 31, 597–618. doi:10.1021/acs.chemmater.8b04444
Shi, L., Rosenberg, A., Wang, Y., Liu, P., Danesh Yazdi, M., Réquia, W., et al. (2021). Low-Concentration Air Pollution and Mortality in American Older Adults: A National Cohort Analysis (2001-2017). Environ. Sci. Technol. doi:10.1021/acs.est.1c03653
Weon, S., and Choi, W. (2016). TiO2 Nanotubes with Open Channels as Deactivation-Resistant Photocatalyst for the Degradation of Volatile Organic Compounds. Environ. Sci. Technol. 50, 2556–2563. doi:10.1021/acs.est.5b05418
Weon, S., He, F., and Choi, W. (2019). Status and Challenges in Photocatalytic Nanotechnology for Cleaning Air Polluted with Volatile Organic Compounds: Visible Light Utilization and Catalyst Deactivation. Environ. Sci. Nano 6, 3185–3214. doi:10.1039/C9EN00891H
Wu, Q., and van de Krol, R. (2012). Selective Photoreduction of Nitric Oxide to Nitrogen by Nanostructured TiO2Photocatalysts: Role of Oxygen Vacancies and Iron Dopant. J. Am. Chem. Soc. 134, 9369–9375. doi:10.1021/ja302246b
Yu, Q. L., Ballari, M. M., and Brouwers, H. J. H. (2010). Indoor Air Purification Using Heterogeneous Photocatalytic Oxidation. Part II: Kinetic Study. Appl. Catal. B: Environ. 99, 58–65. doi:10.1016/j.apcatb.2010.05.032
Keywords: photocatalytic degradation, air pollutants, photocatalytic mechanism, photocatalytic reactor, VOCs
Citation: Dong P, Dong F and Fiorenza R (2022) Editorial: Photocatalysts for Air Purification: Design, Synthesis, and Mechanism Investigations. Front. Chem. 10:870550. doi: 10.3389/fchem.2022.870550
Received: 07 February 2022; Accepted: 18 February 2022;
Published: 16 March 2022.
Edited and reviewed by:
Anna Zielińska-Jurek, Gdansk University of Technology, PolandCopyright © 2022 Dong, Dong and Fiorenza. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Pengyu Dong, ZG9uZ3B5MTFAZ21haWwuY29t; Fan Dong, ZGZjdGJ1QDEyNi5jb20=; Roberto Fiorenza, cm9iZXJ0by5maW9yZW56YUB1bmljdC5pdA==