AUTHOR=Wu Tingjun , Kim Jiwon , Myung Nosang V. 

TITLE=Electrochemical Mechanism of Tellurium Reduction in Alkaline Medium

JOURNAL=Frontiers in Chemistry

VOLUME=8

YEAR=2020

URL=https://www.frontiersin.org/journals/chemistry/articles/10.3389/fchem.2020.00084

DOI=10.3389/fchem.2020.00084

ISSN=2296-2646

ABSTRACT=<p>A systematic electrochemical study was conducted to investigate the reduction of tellurium (Te) in alkaline solutions. The effect of various parameters, including tellurite ion concentration, applied potential, and pH was investigated by both linear sweep voltammograms (LSVs) and electrochemical quartz crystal microbalance (EQCM). EQCM was essential to understand the reduction of Te(0) to soluble <inline-formula><mml:math id="M1" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msubsup><mml:mrow><mml:mtext>Te</mml:mtext></mml:mrow><mml:mrow><mml:mn>2</mml:mn></mml:mrow><mml:mrow><mml:mn>2</mml:mn><mml:mo>-</mml:mo></mml:mrow></mml:msubsup></mml:math></inline-formula>(-I) or Te<sup>2−</sup>(-II). The Tafel slopes for two Te reduction reactions [i.e., Te(IV) to Te(0) and Te(0) to Te(-I)] indicated that the electrochemical reduction of Te is strongly dependent on solution pH, whereas it is independent of the concentration of <inline-formula><mml:math id="M2" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msubsup><mml:mrow><mml:mtext>TeO</mml:mtext></mml:mrow><mml:mrow><mml:mn>3</mml:mn></mml:mrow><mml:mrow><mml:mn>2</mml:mn><mml:mo>-</mml:mo></mml:mrow></mml:msubsup></mml:math></inline-formula>. At relatively weaker alkaline solutions (i.e., pH ≤ 12.5), the discharge of <inline-formula><mml:math id="M3" xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:msubsup><mml:mrow><mml:mtext>Te</mml:mtext><mml:mo stretchy="false">(</mml:mo><mml:mtext>OH</mml:mtext><mml:mo stretchy="false">)</mml:mo></mml:mrow><mml:mrow><mml:mn>3</mml:mn></mml:mrow><mml:mrow><mml:mo>+</mml:mo></mml:mrow></mml:msubsup></mml:math></inline-formula> was determined to be the rate-limiting step during the reduction of Te(IV) to Te(0). For the reduction of Te(0) to Te(-I), the reaction follows a four-step reaction, which consisted of two discharge and two electrochemical reactions. The second discharge reaction was the rate-limiting step when pH ≤12.5 with the Tafel slope of 120 mV/decade. At a higher pH of 14.7, the Tafel slope was shifted to be 40 mV/decade, which indicated that the rate-limiting step was altered to the second electrochemical reaction. Te(0) deposits were found either on the surface of an electrode or in the solution depending on pH due to the different rate-limiting reactions, revealing that pH was a key parameter to dictate the morphology of the Te(0) deposits in alkaline media.</p>