AUTHOR=Porninta Kritsadaporn , Khemacheewakul Julaluk , Techapun Charin , Phimolsiripol Yuthana , Jantanasakulwong Kittisak , Sommanee Sumeth , Mahakuntha Chatchadaporn , Feng Juan , Htike Su Lwin , Moukamnerd Churairat , Zhuang Xinshu , Wang Wen , Qi Wei , Li Fu-Li , Liu Tianzhong , Kumar Anbarasu , Nunta Rojarej , Leksawasdi Noppol TITLE=Pretreatment and enzymatic hydrolysis optimization of lignocellulosic biomass for ethanol, xylitol, and phenylacetylcarbinol co-production using Candida magnoliae JOURNAL=Frontiers in Bioengineering and Biotechnology VOLUME=11 YEAR=2024 URL=https://www.frontiersin.org/journals/bioengineering-and-biotechnology/articles/10.3389/fbioe.2023.1332185 DOI=10.3389/fbioe.2023.1332185 ISSN=2296-4185 ABSTRACT=
Cellulosic bioethanol production generally has a higher operating cost due to relatively expensive pretreatment strategies and low efficiency of enzymatic hydrolysis. The production of other high-value chemicals such as xylitol and phenylacetylcarbinol (PAC) is, thus, necessary to offset the cost and promote economic viability. The optimal conditions of diluted sulfuric acid pretreatment under boiling water at 95°C and subsequent enzymatic hydrolysis steps for sugarcane bagasse (SCB), rice straw (RS), and corn cob (CC) were optimized using the response surface methodology via a central composite design to simplify the process on the large-scale production. The optimal pretreatment conditions (diluted sulfuric acid concentration (% w/v), treatment time (min)) for SCB (3.36, 113), RS (3.77, 109), and CC (3.89, 112) and the optimal enzymatic hydrolysis conditions (pretreated solid concentration (% w/v), hydrolysis time (h)) for SCB (12.1, 93), RS (10.9, 61), and CC (12.0, 90) were achieved. CC xylose-rich and CC glucose-rich hydrolysates obtained from the respective optimal condition of pretreatment and enzymatic hydrolysis steps were used for xylitol and ethanol production. The statistically significant highest (