This article is an erratum on:
A novel approach for tetrahedral-element-based finite element simulations of anisotropic hyperelastic intervertebral disc behavior
Frontiers Production Officeby Fasser M-R, Kuravi R, Bulla M, Snedeker JG, Farshad M and Widmer J (2022) anisotropic hyperelastic intervertebral disc behavior. Front. Bioeng. Biotechnol. 10:1034441. doi: 10.3389/fbioe.2022.1034441
An omission to the Funding section of the original article was made in error. The following sentence has been added: “Open access funding was provided by ETH Zurich.”
The publisher apologizes for this mistake. The original version of this article has been updated.
Keywords: intervertebral discs, spinal segments, microstructural modeling, FE-based models, explicit time-stepping, inverse FE method, tetrahedral elements
Citation: Frontiers Production Office (2023) Erratum: A novel approach for tetrahedral-element-based finite element simulations of anisotropic hyperelastic intervertebral disc behavior. Front. Bioeng. Biotechnol. 11:1170903. doi: 10.3389/fbioe.2023.1170903
Received: 21 February 2023; Accepted: 21 February 2023;
Published: 02 March 2023.
Approved by:
Frontiers Editorial Office, Frontiers Media SA, SwitzerlandCopyright © 2023 Frontiers Production Office. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
*Correspondence: Frontiers Production Office, cHJvZHVjdGlvbi5vZmZpY2VAZnJvbnRpZXJzaW4ub3Jn