Skip to main content

MINI REVIEW article

Front. Bioeng. Biotechnol., 18 December 2018
Sec. Tissue Engineering and Regenerative Medicine
This article is part of the Research Topic Medical and Industrial Applications of Microfluidic-based Cell/Tissue Culture and Organs-on-a-Chip View all 13 articles

Mimicking Epithelial Tissues in Three-Dimensional Cell Culture Models

\r\nNúria Torras&#x;Núria Torras1María García-Díaz&#x;María García-Díaz1Vanesa Fernndez-Majada*&#x;Vanesa Fernández-Majada1*Elena Martínez,,*&#x;Elena Martínez1,2,3*
  • 1Biomimetic Systems for Cell Engineering, Institute for Bioengineering of Catalonia, Barcelona Institute of Science and Technology, Barcelona, Spain
  • 2Centro de Investigación Biomédica en Red, Madrid, Spain
  • 3Department of Electronics and Biomedical Engineering, University of Barcelona, Barcelona, Spain

Epithelial tissues are composed of layers of tightly connected cells shaped into complex three-dimensional (3D) structures such as cysts, tubules, or invaginations. These complex 3D structures are important for organ-specific functions and often create biochemical gradients that guide cell positioning and compartmentalization within the organ. One of the main functions of epithelia is to act as physical barriers that protect the underlying tissues from external insults. In vitro, epithelial barriers are usually mimicked by oversimplified models based on cell lines grown as monolayers on flat surfaces. While useful to answer certain questions, these models cannot fully capture the in vivo organ physiology and often yield poor predictions. In order to progress further in basic and translational research, disease modeling, drug discovery, and regenerative medicine, it is essential to advance the development of new in vitro predictive models of epithelial tissues that are capable of representing the in vivo-like structures and organ functionality more accurately. Here, we review current strategies for obtaining biomimetic systems in the form of advanced in vitro models that allow for more reliable and safer preclinical tests. The current state of the art and potential applications of self-organized cell-based systems, organ-on-a-chip devices that incorporate sensors and monitoring capabilities, as well as microfabrication techniques including bioprinting and photolithography, are discussed. These techniques could be combined to help provide highly predictive drug tests for patient-specific conditions in the near future.

Introduction

Epithelial tissues are composed of cells laid out in sheets with strong intercellular bonds that form physical barriers that line the cavities of major organs (lung, skin, intestine, etc.) and protect them from external physical, chemical, and microbial insults. Epithelial cells are polarized, i.e., their apical side, facing the lumen of the organ, differs in shape and composition from the basolateral side. Epithelial cells rest on a basement membrane that acts as a growth support and as a selectively permeable layer. Besides protection, the main functions of epithelial cells include secretion, selective absorption, transcellular transport, and detection of sensation. Epithelia are actively and rapidly renewing tissues due to the presence of fast dividing adult stem cells (Crosnier et al., 2006; Vrana et al., 2013). In addition, they are a major site for carcinogenesis (Beyer et al., 2013). Many epithelial tissues have three-dimensional (3D) spatial features such as tissue widens, compact folds, invaginations, evaginations, and wavy morphologies. Such complex structures might generate biochemical factor gradients that drive the compartmentalization of the different cell types and are key determinants for organ-specific functions. Some examples are acini in the mammary gland, alveoli in the lung, Vogt palisades in the cornea, rete ridges in the skin, and crypt-villus structures in the small intestine (Figure 1). The latter are triggered by mechanical forces during morphogenesis and generate gradients of biochemical signals that spatially segregate the various tissue-forming cell types (Bollenbach and Heisenberg, 2015; Shyer et al., 2015).

FIGURE 1
www.frontiersin.org

Figure 1. Schematic representation of epithelial tissues with their native 3D architecture, conventional 2D cell cultures, and novel 3D cell culture approaches.

Functional in vitro models of epithelial layers are key elements to basic research, disease modeling, drug discovery, and tissue replacement (Stange and Clevers, 2013). There is an increasing demand for in vitro models that are capable of capturing the complex epithelial architecture of tissues in vivo. Conventional preclinical models are typically two-dimensional (2D) or rely on animal models. While 2D models can provide useful information on early biological responses and are suitable for high-throughput drug screening, they have poor predictive capabilities. And while existing animal models can capture the complex physiology and interactions of in vivo tissues, they often fail to predict human responses due to species-specific differences. In addition, their use is often restricted due to ethical concerns. In an effort to overcome these limitations and as a kind of paradigm shift, 3D human models have emerged that are capable of capturing complex physiological responses in vitro (Griffith and Swartz, 2006). These new models rely on advances in cell biology, micro-engineering, biomaterials, and biofabrication.

In this study, we review the main technological strategies currently used to create 3D complex models of epithelial tissues: self-organized cell cultures, lab-on-chip devices, engineered microtissues, and various combinations of these. As the focus is typically placed on mimicking the epithelial tissue barrier properties in vitro, the studies reviewed here all focused on the epithelial compartment and the underlying matrix. We found that depending on the application, these engineered approaches can be extended to provide the 3D models with immunocompetent properties, microbiome, or vascularity.

Self-Organized 3D Cell Cultures

In contrast to 2D cell culture models where cells usually grow as monolayers on flat substrates, cells in 3D culture systems self-organize as 3D aggregates, either employing a matrix as a physical support or in a scaffold-free manner. Commonly used matrices include both biologically- and synthetically-derived hydrogels such as Matrigel®, polyethylene glycol, or poly(vinyl alcohol) (Tibbitt and Anseth, 2009; Rimann and Graf-Hausner, 2012; Fang and Eglen, 2017). Based on the type of cells and their cellular organization, there are currently two types of 3D self-organized cell culture models: spheroid and organoid models. Spheroids do not need a supportive matrix to grow and are more irregularly arranged cell aggregates with a rather poor organization of relevant tissue. Organoids, on the other hand, originate from stem cells, which give rise to different organ-specific cell types and ensure the culture's high self-renewal capabilities. Organoids require a matrix to grow and possess a more ordered assembly that typically recapitulates the 3D complex tissue structures. Both 3D models have gained recent popularity as new in vitro tools for drug testing, disease modeling, and tissue engineering (Fang and Eglen, 2017).

Essentially, spheroids are clumps of poorly organized cells that have become a popular model in oncology research. Due to their solid spherical morphology, both oxygen and nutrients decrease toward the center, decreasing cell viability from the outer cell layers to their hypoxic and necrotic cores (Lin and Chang, 2008) (Figure 1). This feature very closely recapitulates the biochemical and cellular conditions found in most solid tumors. Tumor-derived spheroids, or tumor-spheres, have been generated from primary cancer cells (including cancer stem cells) derived from various sources such as glioma, breast, colon, ovary, and prostate tumors (Ishiguro et al., 2017). In addition to their 3D nature, the methods for generating spheroids are simple, cost-effective, highly reproducible, and adaptable, which has favored their use as in vitro models in the drug discovery industry in a semi-high throughput format (Youn et al., 2006; Tung et al., 2011; Vinci et al., 2012). Despite these benefits, spheroids are only poor in vitro models of healthy epithelial tissues, mainly due to their lack of self-renewal and differentiation properties as well as their inability to organize in tissue-like structures.

Organoids are highly organized 3D cell cultures that originated from organ specific or pluripotent stem cells with self-renewal and differentiation capabilities. When embedded in a suitable matrix and cultured with specific biochemical factors that mimic the in vivo stem cell niche, stem cells possess an intrinsic ability to differentiate and self-organize into 3D structures that resemble the in vivo organ. The culture conditions needed to generate organoids derived from intestine, skin, lung, liver, and pancreas, among others organs, employing a wealth of different cells sources from different species, are known (Rossi et al., 2018). Due to their in vivo resemblance in cell composition, structure and function, organoids have become the gold standard in vitro culture method in basic and translational epithelia research, when modeling patient-specific diseases, or as a source of autologous tissue transplantation (Yui et al., 2012; Dekkers et al., 2013; Middendorp et al., 2014).

While organoid technology undoubtedly represents a scientific breakthrough in epithelial tissue research, organoids still do not fully recapitulate all characteristics of in vivo epithelia. A major drawback is their 3D closed geometry, which complicates access to specific organoid compartments. For instance, the inaccessibility of the organoid-analog lumen in intestinal organoids hampers the use of conventional assays and instrumentation designed for high throughput screening studies on nutrient transport, drug absorption and delivery, or microbe-epithelium interactions (Wilson et al., 2015). In addition, the use of conventional microscopy for experimental data collection is complicated by the fact that organoids are cultured while embedded in a 3D hydrogel matrix. New strategies have been proposed to overcome these difficulties, with organoids “opened up” into flat epithelial monolayers that provide unhindered access to the luminal and basolateral compartments (Moon et al., 2014). In addition, this culture configuration has the potential to control the spatio-temporal delivery of biochemical factors through porous materials mimicking the basement membrane. When combined with 3D structures mimicking the epithelial architecture, this strategy could guide epithelial cell organization in an in vivo-like manner, leading to advanced organotypic 3D models (Wang et al., 2017). This will be aided by the continuing progress being made in microfluidics, biomaterials, and microfabrication techniques toward advanced 3D models.

Lab-on-a-Chip Devices Mimicking Epithelial Tissues

Conventional approaches for differentiated epithelial cell culture are based on Transwell® systems (Rodriguez-Boulan et al., 2005) where cells form polarized monolayers on porous membranes creating independent apical and basolateral compartments, thus mimicking some basic properties of in vivo epithelial tissues (Figure 1). However, the highly dynamic in vivo environments are not represented by these static approaches (Mammoto et al., 2013). The organ-on-a-chip technology facilitates physiologically more relevant conditions and provides cells with physical and chemical stimuli by perfusing media in a laminar flow (Gayer and Basson, 2009; Cimetta et al., 2010; Thuenauer and Rodriguez-boulan, 2015). To promote cell polarization, organ-on-a-chip devices (also called microphysiological systems) usually include a porous membrane to separate two microfluidic channels. Different cells can be co-cultured on the opposite sides of this membrane, which provides a tissue-tissue interface with independent access to the cell culture chambers (Figure 1). Monitoring of the dynamic cellular responses can be achieved by incorporating biosensors and electrodes into the microfluidic device (Henry et al., 2017; Skardal et al., 2017), while its optical transparency enables direct visualization by conventional microscopy.

Several lab-on-a-chip devices, capable of representing the majority of epithelial barriers in the human body, have been designed, and kept alive and functional for several weeks. These devices can range from simple micrometer-sized chambers that simulate a specific tissue function to sophisticated “human-on-a-chip” or multi-organ microfluidic frameworks that recapitulate even complex tissue-tissue interactions (Rogal et al., 2017). One of the pioneering systems capable of fully reproducing the complex physiological functionality was the lung-on-a-chip device (Huh et al., 2010). This chip contained two apposed microchannels separated by a thin and flexible porous membrane where pulmonary epithelial cells and capillary endothelial cells were co-cultured. Cells were mechanically stimulated by the cyclic strain of breathing movements. This lung-on-a-chip system has been used for modeling respiratory diseases such as chronic obstructive pulmonary disease (Benam et al., 2016) or lung cancer (Hassell et al., 2017). Using a similar design, intestinal peristaltic movements could be mimicked with a gut-on-a-chip platform (Kim et al., 2012, 2015; Kim and Ingber, 2013). In this case, intestinal cells were exposed to fluid flow and peristaltic motion that induced villi formation and cell differentiation. This gut-on-a-chip device, along with other intestinal chips such as HuMiX, has been used to recapitulate the interplay between intestinal microbes and the epithelium (Kim et al., 2015; Shah et al., 2016). Innovative perfusable vascularized skin-on-a-chip models (Wufuer et al., 2016; Mori et al., 2017) or immune-competent models (Ramadan and Ting, 2016) have been proposed, both aiming to create more physiologically relevant skin equivalents for drug screening and disease modeling (Abaci et al., 2015; Alberti et al., 2017; van den Broek et al., 2017; Sriram et al., 2018).

A unique advantage of the organ-on-a-chip technology is its inherent ability to integrate multiple organ functions into a closed microfluidic system, which facilitates a better recapitulation in vitro of the human metabolism and physiology. For example, the first-pass metabolism of oral drugs can be reproduced on a gut-liver chip (Choe et al., 2017; Lee et al., 2017). “Multi-organ-on-a-chip” devices have been developed that consist of several interconnected chambers, each representing different organs of the body. These sophisticated models aim to improve predictive capabilities with regard to the spatial distribution and temporal evolution of compounds, addressing issues such as targeting, safety, and toxicity in a single device (Abaci et al., 2015; Maschmeyer et al., 2015; Skardal et al., 2017).

Although organ-on-chip devices represent a huge leap toward the generation of improved in vitro epithelia models, challenges such as the functional scaling or the interaction with stromal components remain (Ronaldson-Bouchard and Vunjak-Novakovic, 2018). In addition, the epithelial basement membrane is usually mimicked by a porous membrane that neither possesses the physicochemical nor mechanical properties of the native tissue matrix. Current developments try to address these limitations by exploiting advances in biomaterials and microfabrication techniques. As recent examples, full-thickness skin-on-a-chip devices used dermal matrices to represent the 3D complexity of the skin (Schimek et al., 2018; Sriram et al., 2018) and gut-on-a-chip designs included a porous scaffold that mimicked the 3D villus architecture of the small intestine (Costello et al., 2017; Shim et al., 2017). On the other hand, the combination of microfluidics with organoids from human induced pluripotent stem cells (iPSCs) or patient biopsies would likely have major implications for personalized medicine, as already exemplified by intestinal chips (Kasendra et al., 2018; Workman et al., 2018).

Engineered Epithelial Tissues and Microtissues

Organoid technology has revealed the key role played by the matrix in guiding a cell's intrinsic self-organizing ability when forming functional tissues. However, epithelial cells are cultured on flat porous membranes of hard polymers on both Transwell® and lab-on-a-chip devices. Advances in soft biomaterials and microfabrication techniques provide new alternatives to achieve a better representation of the complex basement membrane in native epithelial tissues (Abbott, 2003; Lutolf et al., 2009; Murphy and Atala, 2014).

3D bioprinting is a relatively recent and versatile manufacturing technique that builds tissues and microtissues layer by layer using bioinks from cell-laden materials (Derby, 2012; Vijayavenkataraman et al., 2018). Bioprinted tissue constructs that faithfully recapitulate the architecture of native tissues such as skin and cornea epithelia can be fabricated in a highly reproducible manner (He et al., 2018; Sorkio et al., 2018). This approach can also be used to generate complex tubular structures such as renal proximal tubules and trachea implants (Homan et al., 2016; Bae et al., 2018). Despite its advantages, 3D bioprinting is a complex procedure that still faces many challenges such as improving cell viability and density, decreasing printing times, and increasing the printed tissue dimensions (Chang et al., 2011; Murphy and Atala, 2014). Recent advances led to the development of new bioinks, e.g., cell-derived and decellularized extracellular matrices (Fitzpatrick and McDevitt, 2015; Gopinathan and Noh, 2018) or spheroids used as individual printed units to promote in vitro assembly (Mironov et al., 2009; Moroni et al., 2018). Bioprinting has also evolved into a 4D technique that aims at the fabrication of time-evolving tissues by employing programmable biomaterials (Qi et al., 2013).

Lithography-based microfabrication techniques, including replica molding and photolithography, have become the standard in microelectronics to manufacture structures at cellular and subcellular scales (Whitesides, 2003). Nowadays, their application has been extended to include soft materials and to mimic 3D geometries in epithelial tissues. For instance, replica molding has been used to generate 3D microstructures that mimic the villus protrusions of the small intestine on poly(lactic-co-glycol acid) and collagen (Sung et al., 2011; Yu et al., 2012; Wang et al., 2017). Drug permeability assays have demonstrated the benefits of including the 3D tissue architecture for better predictions of the permeability found in vivo (Yu et al., 2012). However, replica molding of hydrogels involves a sequence of molding and demolding steps that renders this process not very amenable for mass production (Nelson et al., 2006; Sung et al., 2011; Pan et al., 2013; Cerchiari et al., 2015). In contrast, light-based polymerization approaches such as mask-based photolithography and stereolithography (SLA) can produce 3D microstructures on soft polymers in a fast, robust, and moldless manner (Tsang et al., 2007; Moroni et al., 2018). When combined with cells, the use of photoinitiator molecules and UV light might compromise cell viability, which has led to the development of new photoinitiators that are sensitive to visible light. 3D microengineered tissues generated by these techniques have been introduced into microfluidic devices or Transwell® inserts to be used as in vitro testing platforms (Yu et al., 2012; Costello et al., 2017; García Castaño, 2017). Recent publications also emphasized the potential of interfacing light-based microfabrication techniques with organoids to create enhanced organomimetic tissues (Schneeberger et al., 2017).

Summary and Future Perspectives

New cell culture platforms that incorporate the unique and complex 3D architectures of epithelial tissues promise in vitro models with unprecedented tissue functionality. This review has highlighted recent advances in biology, biomaterials, and microfabrication techniques that could prove pivotal for the creation of these organotypic models. Advances in stem cell biology have led to the generation of organoids that recapitulate the in vivo 3D tissue-structure and functionality, which in itself represents a giant step toward potential applications of in vitro assays in the medical field (Rossi et al., 2018). For example, forskolin-induced swelling in intestinal organoids is now used as an in vitro test for assessing drug response in cystic fibrosis patients (Dekkers et al., 2013). In addition, current developments to establish organoids from human iPSCs in combination with novel technologies for gene editing could pave the way to personalized medicine applications. iPSC-derived organoids are used to model human organ development and disease, to test therapeutic compounds, and in cell transplantation (Shi et al., 2017). Furthermore, the 3D tissue-like cell organization provided by organoids can also be exploited to improve the functionality of organ-on-a-chip devices. By increasing the complexity of the cellular models, organ-on-a-chip approaches offer controlled and relatively simple microenvironments of sufficient biological complexity to gain greater insight into the biological mechanisms that drive disease (Bhatia and Ingber, 2014). They possess a great potential to transform drug discovery (Miranda et al., 2018) by providing human cell-based models that are capable of predicting drug delivery through epithelial barriers. In fact, pharmaceutical and biotechnological companies have already begun to incorporate these systems into their preclinical assays in an effort to improve their predictive capabilities (Ahadian et al., 2018; Cirit and Stokes, 2018). However, a better standardization and more user-friendly setups with high-throughput capabilities are needed for a broader acceptance by both industry and regulatory authorities. In this context, the development of new biofabrication techniques together with advances in biological and biomaterial research should soon allow for the development of engineered tissues and microtissues. The advantages of these structures as in vitro models of epithelial tissues are 2-fold: (1) they would allow the integration of non-epithelial elements that are essential for tissue function such as the immune, mesenchymal, and vascular systems (Kirkpatrick and Fuchs, 2011; Vrana et al., 2013; Battiston et al., 2014), and (2) microtissues can be easily interfaced with well plate culture formats that promise high-throughput capabilities which should promote their acceptance in the pharmaceutical and medical industries. Finally, although the key technologies reviewed here seem capable of jointly generating a set of new tools that are capable of a more accurate representation of epithelia physiological functions, the targeted applications should maintain a manageable level of complexity to provide real and meaningful impact in the biomedical and biotechnological arena.

Author Contributions

MG-D and NT wrote the manuscript and contributed equally to this work. VF-M and EM wrote and edited the manuscript and share corresponding authorship.

Funding

This work was supported by European Union's Horizon 2020 ERC grant agreement No 647863 (COMIET), the CERCA Program/Generalitat de Catalunya (2017-SGR-1079), and the Spanish Ministry of Economy and Competitiveness (TEC2014-51940-C2-2-R, TEC2017-83716-C2-1-R and the Severo Ochoa Program for Centers of Excellence in R&D 2016-2019). MG-D thanks the BEST Postdoctoral Program, funded by the European Commission under Horizon 2020's Marie Skłodowska-Curie Actions COFUND scheme (Grant Agreement no. 712754) and by the Severo Ochoa program of the Spanish Ministry of Science and Competitiveness [Grant SEV-2014-0425 (2015-2019)]. The results presented here reflect only the views of the authors; the European Commission is not responsible for any use that may be made of the information it contains.

Conflict of Interest Statement

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Acknowledgments

The authors thank Aina Abad Lazaro for proofreading the manuscript.

References

Abaci, H. E., Gledhill, K., Guo, Z., Christiano, A. M., and Shuler, M. L. (2015). Pumpless microfluidic platform for drug testing on human skin equivalents. Lab Chip 15, 882–888. doi: 10.1039/C4LC00999A

PubMed Abstract | CrossRef Full Text | Google Scholar

Abbott, A. (2003). Biology' s new dimension. Nature 424, 870–872. doi: 10.1038/424870a

CrossRef Full Text | Google Scholar

Ahadian, S., Civitarese, R., Bannerman, D., Mohammadi, M. H., Lu, R., Wang, E., et al. (2018). Organ-on-a-chip platforms: a convergence of advanced materials, cells, and microscale technologies. Adv. Healthc. Mater. 7, 1–53. doi: 10.1002/adhm.201700506

CrossRef Full Text | Google Scholar

Alberti, M., Dancik, Y., Sriram, G., Wu, B., Teo, Y. L., Feng, Z., et al. (2017). Multi-chamber microfluidic platform for high-precision skin permeation testing. Lab Chip 17, 1625–1634. doi: 10.1039/C6LC01574C

PubMed Abstract | CrossRef Full Text | Google Scholar

Bae, S. W., Lee, K. W., Park, J. H., Lee, J. H., Jung, C. R., Yu, J. J., et al. (2018). 3D bioprinted artificial trachea with epithelial cells and chondrogenic-differentiated bone marrow-derived mesenchymal stem cells. Int. J. Mol. Sci. 19, 1–14. doi: 10.3390/ijms19061624

PubMed Abstract | CrossRef Full Text | Google Scholar

Battiston, K. G., Cheung, J. W., Jain, D., and Santerre, J. P. (2014). Biomaterials in co-culture systems: towards optimizing tissue integration and cell signaling within scaffolds. Biomaterials 35, 4465–4476. doi: 10.1016/j.biomaterials.2014.02.023

PubMed Abstract | CrossRef Full Text | Google Scholar

Benam, K. H., Villenave, R., Lucchesi, C., Varone, A., Hubeau, C., Lee, H. H., et al. (2016). Small airway-on-a-chip enables analysis of human lung inflammation and drug responses in vitro. Nat. Methods 13, 151–157. doi: 10.1038/nmeth.3697

PubMed Abstract | CrossRef Full Text | Google Scholar

Beyer, I., van Rensburg, R., and Lieber, A. (2013). Overcoming physical barriers in cancer therapy. Tissue Barriers. 1, 1–6. doi: 10.4161/tisb.23647

PubMed Abstract | CrossRef Full Text | Google Scholar

Bhatia, S. N., and Ingber, D. E. (2014). Microfluidic organs-on-chips. Nat. Biotechnol. 32, 760–772. doi: 10.1038/nbt.2989

PubMed Abstract | CrossRef Full Text | Google Scholar

Bollenbach, T., and Heisenberg, C. P. (2015). Gradients are shaping up. Cell 161, 431–432. doi: 10.1016/j.cell.2015.04.009

PubMed Abstract | CrossRef Full Text | Google Scholar

Cerchiari, A., Garbe, J. C., Todhunter, M. E., Jee, N. Y., Pinney, J. R., LaBarge, M. A., et al. (2015). Formation of spatially and geometrically controlled three-dimensional tissues in soft gels by sacrificial micromolding. Tissue Eng. Part C Methods 21, 541–547. doi: 10.1089/ten.tec.2014.0450

PubMed Abstract | CrossRef Full Text | Google Scholar

Chang, C. C., Boland, E. D., Williams, S. K., and Hoying, J. B. (2011). Direct-write bioprinting three-dimensional biohybrid systems for future regenerative therapies. J. Biomed. Mater. Res. B 98, 160–170. doi: 10.1002/jbm.b.31831

PubMed Abstract | CrossRef Full Text | Google Scholar

Choe, A., Ha, S. K., Choi, I., Choi, N., and Sung, J. H. (2017). Microfluidic Gut-liver chip for reproducing the first pass metabolism. Biomed. Microdev. 19, 1–11. doi: 10.1007/s10544-016-0143-2

PubMed Abstract | CrossRef Full Text | Google Scholar

Cimetta, E., Cannizzaro, C., James, R., Biechele, T., Moon, R. T., Elvassore, N., et al. (2010). Microfluidic device generating stable concentration gradients for long term cell culture: Application to Wnt3a regulation of β-catenin signaling. Lab Chip 10, 3277–3283. doi: 10.1039/c0lc00033g

PubMed Abstract | CrossRef Full Text | Google Scholar

Cirit, M., and Stokes, C. L. (2018). Maximizing the impact of microphysiological systems with: in vitro- In vivo translation. Lab Chip 18, 1831–1837. doi: 10.1039/C8LC00039E

PubMed Abstract | CrossRef Full Text | Google Scholar

Costello, C. M., Phillipsen, M. B., Hartmanis, L. M., Kwasnica, M. A., Chen, V., Hackam, D., et al. (2017). Microscale Bioreactors for in situ characterization of GI epithelial cell physiology. Sci. Rep. 7:12515. doi: 10.1038/s41598-017-12984-2

PubMed Abstract | CrossRef Full Text | Google Scholar

Crosnier, C., Stamataki, D., and Lewis, J. (2006). Organizing cell renewal in the intestine: stem cells, signals and combinatorial control. Nat. Rev. Genet. 7, 349–359. doi: 10.1038/nrg1840

PubMed Abstract | CrossRef Full Text | Google Scholar

Dekkers, J. F., Wiegerinck, C. L., De Jonge, H. R., Bronsveld, I., Janssens, H. M., de Winter-de Groot, K. M., et al. (2013). A functional CFTR assay using primary cystic fibrosis intestinal organoids. Nat. Med. 19, 939–945. doi: 10.1038/nm.3201

PubMed Abstract | CrossRef Full Text | Google Scholar

Derby, B. (2012). Printing and prototyping of tissues and scaffolds. Science (80-.). 338, 921–927. doi: 10.1126/science.1226340

PubMed Abstract | CrossRef Full Text | Google Scholar

Fang, Y., and Eglen, R. M. (2017). Three-dimensional cell cultures in drug discovery and development. SLAS Discov. 22, 456–472. doi: 10.1177/1087057117696795

PubMed Abstract | CrossRef Full Text | Google Scholar

Fitzpatrick, L. E., and McDevitt, T. C. (2015). Cell-derived matrices for tissue engineering and regenerative medicine applications. Biomater. Sci. 3, 12–24. doi: 10.1039/C4BM00246F

PubMed Abstract | CrossRef Full Text | Google Scholar

García Castaño, A. (2017). Engineering Poly (Ethylene Glycol) Diacrylate-Based Microstructures to Develop an in vitro Model of Small Intestintal Epithelium. Thesis, Universitat de Barcelona.

Gayer, C. P., and Basson, M. D. (2009). The effects of mechanical forces on intestinal physiology and pathology. Cell Signal. 21, 1237–1244. doi: 10.1016/j.cellsig.2009.02.011

PubMed Abstract | CrossRef Full Text | Google Scholar

Gopinathan, J., and Noh, I. (2018). Recent trends in bioinks for 3D printing. Biomater. Res. 22, 1–15. doi: 10.1186/s40824-018-0122-1

PubMed Abstract | CrossRef Full Text | Google Scholar

Griffith, L. G., and Swartz, M. A. (2006). Capturing complex 3D tissue physiology in vitro. Nat. Rev. Mol. Cell Biol. 7, 211–224. doi: 10.1038/nrm1858

PubMed Abstract | CrossRef Full Text | Google Scholar

Hassell, B. A., Goyal, G., Lee, E., Sontheimer-phelps, A., Levy, O., Chen, C. S., et al. (2017). Human organ chip models recapitulate orthotopic lung cancer growth, therapeutic responses, and tumor dormancy in vitro human organ chip models recapitulate orthotopic lung cancer growth, therapeutic responses, and tumor dormancy in vitro. Cell Rep. 21, 508–516. doi: 10.1016/j.celrep.2017.09.043

PubMed Abstract | CrossRef Full Text | Google Scholar

He, P., Zhao, J., Zhang, J., Li, B., Gou, Z., Gou, M., et al. (2018). Bioprinting of skin constructs for wound healing. Burn. Trauma 6, 5. doi: 10.1186/s41038-017-0104-x

PubMed Abstract | CrossRef Full Text | Google Scholar

Henry, O., Villenave, R., Cronce, M., Leineweber, W., Benz, M., and Ingber, D. (2017). Organs-on-chips with integrated electrodes for Trans-Epithelial Electrical Resistance (TEER) measurements of human epithelial barrier function. Lab Chip 17, 2264–2271. doi: 10.1039/C7LC00155J

PubMed Abstract | CrossRef Full Text | Google Scholar

Homan, K. A., Kolesky, D. B., Skylar-Scott, M. A., Herrmann, J., Obuobi, H., Moisan, A., et al. (2016). Bioprinting of 3D Convoluted renal proximal tubules on perfusable chips. Sci. Rep. 6:34845. doi: 10.1038/srep34845

PubMed Abstract | CrossRef Full Text | Google Scholar

Huh, D., Matthews, B. D., Mammoto, A., Montoya-Zavala, M., Hsin, H. Y., and Ingber, D. E. (2010). Reconstituting organ-level lung functions on a chip. Science 328, 1662–1668 doi: 10.1126/science.1188302

PubMed Abstract | CrossRef Full Text | Google Scholar

Ishiguro, T., Ohata, H., Sato, A., Yamawaki, K., Enomoto, T., and Okamoto, K. (2017). Tumor-derived spheroids: relevance to cancer stem cells and clinical applications. Cancer Sci. 108, 283–289. doi: 10.1111/cas.13155

PubMed Abstract | CrossRef Full Text | Google Scholar

Kasendra, M., Tovaglieri, A., Sontheimer-Phelps, A., Jalili-Firoozinezhad, S., Bein, A., Chalkiadaki, A., et al. (2018). Development of a primary human Small Intestine-on-a-Chip using biopsy-derived organoids. Sci. Rep. 8, 1–14. doi: 10.1038/s41598-018-21201-7

PubMed Abstract | CrossRef Full Text | Google Scholar

Kim, H. J., Huh, D., Hamilton, G., and Ingber, D. E. (2012). Human gut-on-a-chip inhabited by microbial flora that experiences intestinal peristalsis-like motions and flow. Lab Chip 12, 2165–2174. doi: 10.1039/c2lc40074j

PubMed Abstract | CrossRef Full Text | Google Scholar

Kim, H. J., and Ingber, D. E. (2013). Gut-on-a-Chip microenvironment induces human intestinal cells to undergovillus differentiation. Integr. Biol. 5, 1130–1140. doi: 10.1039/c3ib40126j

PubMed Abstract | CrossRef Full Text | Google Scholar

Kim, H. J., Li, H., Collins, J. J., and Ingber, D. E. (2015). Contributions of microbiome and mechanical deformation to intestinal bacterial overgrowth and inflammation in a human gut-on-a-chip. Proc. Natl. Acad. Sci. U.S.A. 113:201522193. doi: 10.1073/pnas.1522193112

PubMed Abstract | CrossRef Full Text

Kirkpatrick, C. J., and Fuchs, S. U. (2011). Co-culture systems for vascularization - Learning from nature. Adv. Drug Deliv. Rev. 63, 291–299. doi: 10.1016/j.addr.2011.01.009

PubMed Abstract | CrossRef Full Text | Google Scholar

Lee, D. W., Ha, S. K., Choi, I., and Sung, J. H. (2017). 3D gut-liver chip with a PK model for prediction of first-pass metabolism. Biomed. Microdevices 19:100. doi: 10.1007/s10544-017-0242-8

PubMed Abstract | CrossRef Full Text | Google Scholar

Lin, R. Z., and Chang, H. Y. (2008). Recent advances in three-dimensional multicellular spheroid culture for biomedical research. Biotechnol. J. 3, 1172–1184. doi: 10.1002/biot.200700228

PubMed Abstract | CrossRef Full Text | Google Scholar

Lutolf, M. P., Gilbert, P. M., and Blau, H. M. (2009). Designing materials to direct stem-cell fate. Nature 462, 433–441. doi: 10.1038/nature08602

PubMed Abstract | CrossRef Full Text | Google Scholar

Mammoto, T., Mammoto, A., and Ingber, D. E. (2013). Mechanobiology and developmental control. Annu. Rev. Cell Dev. Biol. 29, 27–61. doi: 10.1146/annurev-cellbio-101512-122340

PubMed Abstract | CrossRef Full Text | Google Scholar

Maschmeyer, I., Lorenz, A. K., Schimek, K., Hasenberg, T., Ramme, A. P., Hübner, J., et al. (2015). A four-organ-chip for interconnected long-term co-culture of human intestine, liver, skin and kidney equivalents. Lab Chip 15, 2688–2699. doi: 10.1039/C5LC00392J

PubMed Abstract | CrossRef Full Text | Google Scholar

Middendorp, S., Schneeberger, K., Wiegerinck, C. L., Mokry, M., Akkerman, R. D. L., Van Wijngaarden, S., et al. (2014). Adult stem cells in the small intestine are intrinsically programmed with their location-specific function. Stem Cells 32, 1083–1091. doi: 10.1002/stem.1655

PubMed Abstract | CrossRef Full Text | Google Scholar

Miranda, C. C., Fernandes, T., Diogo, M., and Cabral, J. (2018). Towards multi-organoid systems for drug screening applications. Bioengineering 5:49. doi: 10.3390/bioengineering5030049

PubMed Abstract | CrossRef Full Text | Google Scholar

Mironov, V., Visconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., and Markwald, R. R. (2009). Biomaterials Organ printing : tissue spheroids as building blocks q. Biomaterials 30, 2164–2174. doi: 10.1016/j.biomaterials.2008.12.084

CrossRef Full Text | Google Scholar

Moon, C., Vandussen, K. L., Miyoshi, H., and Stappenbeck, T. S. (2014). Development of a primary mouse intestinal epithelial cell monolayer culture system to evaluate factors that modulate IgA transcytosis. Mucosal Immunol. 7, 818–828. doi: 10.1038/mi.2013.98

PubMed Abstract | CrossRef Full Text | Google Scholar

Mori, N., Morimoto, Y., and Takeuchi, S. (2017). Skin integrated with perfusable vascular channels on a chip. Biomaterials 116, 48–56. doi: 10.1016/j.biomaterials.2016.11.031

PubMed Abstract | CrossRef Full Text | Google Scholar

Moroni, L., Burdick, J. A., Highley, C., Lee, S. J., Morimoto, Y., Takeuchi, S., et al. (2018). Biofabrication strategies for 3D in vitro models and regenerative medicine. Nat. Rev. Mater. 3, 21–37. doi: 10.1038/s41578-018-0006-y

CrossRef Full Text | Google Scholar

Murphy, S. V., and Atala, A. (2014). 3D bioprinting of tissues and organs. Nat. Biotechnol. 32, 773–785. doi: 10.1038/nbt.2958

PubMed Abstract | CrossRef Full Text | Google Scholar

Nelson, C. M., Vanduijn, M. M., Inman, J. L., Fletcher, D. A., and Bissell, M. J. (2006). Tissue geometry determines sites of mammary branching morphogenesis in organotypic cultures. Science 314, 298–301. doi: 10.1126/science.1131000

PubMed Abstract | CrossRef Full Text | Google Scholar

Pan, J., Yung Chan, S., Common, J. E., Amini, S., Miserez, A., Birgitte Lane, E., et al. (2013). Fabrication of a 3D hair follicle-like hydrogel by soft lithography. J. Biomed. Mater. Res. Part A 101, 3159–3169. doi: 10.1002/jbm.a.34628

PubMed Abstract | CrossRef Full Text | Google Scholar

Qi, H., Ghodousi, M., Du, Y., Grun, C., Bae, H., Yin, P., et al. (2013). DNA-directed self-assembly of shape-controlled hydrogels. Nat. Commun. 4, 1–10. doi: 10.1038/ncomms3275

PubMed Abstract | CrossRef Full Text | Google Scholar

Ramadan, Q., and Ting, F. C. (2016). In vitro micro-physiological immune-competent model of the human skin. Lab Chip 16, 1899–1908. doi: 10.1039/C6LC00229C

PubMed Abstract | CrossRef Full Text | Google Scholar

Rimann, M., and Graf-Hausner, U. (2012). Synthetic 3D multicellular systems for drug development. Curr. Opin. Biotechnol. 23, 803–809. doi: 10.1016/j.copbio.2012.01.011

PubMed Abstract | CrossRef Full Text | Google Scholar

Rodriguez-Boulan, E., Kreitzer, G., and Müsch, A. (2005). Organization of vesicular trafficking in epithelia. Nat. Rev. Mol. Cell Biol. 6, 233–247. doi: 10.1038/nrm1593

PubMed Abstract | CrossRef Full Text | Google Scholar

Rogal, J., Probst, C., and Loskill, P. (2017). Integration concepts for multi-organ chips: how to maintain flexibility?! Future Sci. OA 3:FSO180. doi: 10.4155/fsoa-2016-0092

PubMed Abstract | CrossRef Full Text | Google Scholar

Ronaldson-Bouchard, K., and Vunjak-Novakovic, G. (2018). Organs-on-a-Chip: a fast track for engineered human tissues in drug development. Cell Stem Cell 22, 310–324. doi: 10.1016/j.stem.2018.02.011

PubMed Abstract | CrossRef Full Text | Google Scholar

Rossi, G., Manfrin, A., and Lutolf, M. P. (2018). Progress and potential in organoid research. Nat. Rev. Genet. 19, 671–687. doi: 10.1038/s41576-018-0051-9

PubMed Abstract | CrossRef Full Text | Google Scholar

Schimek, K., Hsu, H. H., Boehme, M., Kornet, J., Marx, U., Lauster, R., et al. (2018). Bioengineering of a full-thickness skin equivalent in a 96-well insert format for substance permeation studies and organ-on-a-chip applications. Bioengineering 5:43. doi: 10.3390/bioengineering5020043

PubMed Abstract | CrossRef Full Text | Google Scholar

Schneeberger, K., Spee, B., Costa, P., Sachs, N., Clevers, H., and Malda, J. (2017). Converging biofabrication and organoid technologies: The next frontier in hepatic and intestinal tissue engineering? Biofabrication 9:013001. doi: 10.1088/1758-5090/aa6121

PubMed Abstract | CrossRef Full Text | Google Scholar

Shah, P., Fritz, J. V., Glaab, E., Desai, M. S., Greenhalgh, K., Frachet, A., et al. (2016). A microfluidics-based in vitro model of the gastrointestinal human-microbe interface. Nat. Commun. 7:11535. doi: 10.1038/ncomms11535

PubMed Abstract | CrossRef Full Text | Google Scholar

Shi, Y., Inoue, H., Wu, J. C., and Yamanaka, S. (2017). Induced pluripotent stem cell technology: a decade of progress. Nat. Rev. Drug Discov. 16, 115–130. doi: 10.1038/nrd.2016.245

PubMed Abstract | CrossRef Full Text | Google Scholar

Shim, K. Y., Lee, D., Han, J., Nguyen, N. T., Park, S., and Sung, J. H. (2017). Microfluidic gut-on-a-chip with three-dimensional villi structure. Biomed. Microdevices 19:37. doi: 10.1007/s10544-017-0179-y

PubMed Abstract | CrossRef Full Text | Google Scholar

Shyer, A. E., Huycke, T. R., Lee, C., Mahadevan, L., and Tabin, C. J. (2015). Bending gradients: how the intestinal stem cell gets its home. Cell 161, 569–580. doi: 10.1016/j.cell.2015.03.041

PubMed Abstract | CrossRef Full Text | Google Scholar

Skardal, A., Murphy, S. V., Devarasetty, M., Mead, I., Kang, H. W., Seol, Y. J., et al. (2017). Multi-tissue interactions in an integrated three-tissue organ-on-a-chip platform. Sci. Rep. 7, 1–16. doi: 10.1038/s41598-017-08879-x

PubMed Abstract | CrossRef Full Text | Google Scholar

Sorkio, A., Koch, L., Koivusalo, L., Deiwick, A., Miettinen, S., Chichkov, B., et al. (2018). Human stem cell based corneal tissue mimicking structures using laser-assisted 3D bioprinting and functional bioinks. Biomaterials 171, 57–71. doi: 10.1016/j.biomaterials.2018.04.034

PubMed Abstract | CrossRef Full Text | Google Scholar

Sriram, G., Alberti, M., Dancik, Y., Wu, B., Wu, R., Feng, Z., et al. (2018). Full-thickness human skin-on-chip with enhanced epidermal morphogenesis and barrier function. Mater. Today 21, 326–340. doi: 10.1016/j.mattod.2017.11.002

CrossRef Full Text | Google Scholar

Stange, D. E., and Clevers, H. (2013). Concise review: the Yin and Yang of intestinal (Cancer) stem cells and their progenitors. Stem Cells 31, 2287–2295. doi: 10.1002/stem.1475

PubMed Abstract | CrossRef Full Text | Google Scholar

Sung, J. H., Yu, J., Luo, D., Shuler, M. L., and March, J. C. (2011). Microscale 3-D hydrogel scaffold for biomimetic gastrointestinal (GI) tract model. Lab Chip 11, 389–392. doi: 10.1039/C0LC00273A

PubMed Abstract | CrossRef Full Text | Google Scholar

Thuenauer, R., and Rodriguez-boulan, E. (2015). Microfluidic approaches for epithelial cell layer culture and characterisation. Analyst 139, 3206–3218. doi: 10.1039/C4AN00056K

PubMed Abstract | CrossRef Full Text | Google Scholar

Tibbitt, M. W., and Anseth, K. S. (2009). Hydrogels as extracellular matrix mimics for 3D cell culture. Biotechnol. Bioeng. 103, 655–663. doi: 10.1002/bit.22361

PubMed Abstract | CrossRef Full Text | Google Scholar

Tsang, V. L., Chen, A. A., Cho, L. M., Jadin, K. D., Sah, R. L., DeLong, S., et al. (2007). Fabrication of 3D hepatic tissues by additive photopatterning of cellular hydrogels. FASEB J. 21, 790–801. doi: 10.1096/fj.06-7117com

CrossRef Full Text | Google Scholar

Tung, Y. C., Hsiao, A. Y., Allen, S. G., Torisawa, Y. S., Ho, M., and Takayama, S. (2011). High-throughput 3D spheroid culture and drug testing using a 384 hanging drop array. Analyst 136, 473–478. doi: 10.1039/C0AN00609B

PubMed Abstract | CrossRef Full Text | Google Scholar

van den Broek, L. J., Bergers, L. I. J. C., Reijnders, C. M. A., and Gibbs, S. (2017). Progress and future prospectives in skin-on-chip development with emphasis on the use of different cell types and technical challenges. Stem Cell Rev. Rep.13, 418–429. doi: 10.1007/s12015-017-9737-1

PubMed Abstract | CrossRef Full Text | Google Scholar

Vijayavenkataraman, S., Yan, W., Feng, W., Wang, C., Ying, J., and Fuh, H. (2018). 3D bioprinting of tissues and organs for regenerative medicine. Adv. Drug Deliv. Rev. 132, 296–332. doi: 10.1016/j.addr.2018.07.004

PubMed Abstract | CrossRef Full Text | Google Scholar

Vinci, M., Gowan, S., Boxall, F., Patterson, L., Zimmermann, M., Court, W., et al. (2012). Advances in establishment and analysis of three-dimensional tumor spheroid-based functional assays for target validation and drug evaluation. BMC Biol. 10:29. doi: 10.1186/1741-7007-10-29

PubMed Abstract | CrossRef Full Text | Google Scholar

Vrana, N. E., Lavalle, P., Dokmeci, M. R., Dehghani, F., Ghaemmaghami, A. M., and Khademhosseini, A. (2013). Engineering functional epithelium for regenerative medicine and in vitro organ models: a review. Tissue Eng. Part B Rev. 19, 529–543. doi: 10.1089/ten.teb.2012.0603

PubMed Abstract | CrossRef Full Text | Google Scholar

Wang, Y., Gunasekara, D. B., Reed, M. I., DiSalvo, M., Bultman, S. J., Sims, C. E., et al. (2017). A microengineered collagen scaffold for generating a polarized crypt-villus architecture of human small intestinal epithelium. Biomaterials 128, 44–55. doi: 10.1016/j.biomaterials.2017.03.005

PubMed Abstract | CrossRef Full Text | Google Scholar

Whitesides, G. M. (2003). The “right” size in nanobiotechnology. Nat. Biotechnol. 21, 1161–1165. doi: 10.1038/nbt872

PubMed Abstract | CrossRef Full Text | Google Scholar

Wilson, S. S., Tocchi, A., Holly, M. K., Parks, W. C., and Smith, J. G. (2015). A small intestinal organoid model of non-invasive enteric pathogen-epithelial cell interactions. Mucosal Immunol. 8, 352–361. doi: 10.1038/mi.2014.72

PubMed Abstract | CrossRef Full Text | Google Scholar

Workman, M. J., Gleeson, J. P., Troisi, E. J., Estrada, H. Q., Kerns, S. J., Hinojosa, C. D., et al. (2018). Enhanced utilization of induced pluripotent stem cell–derived human intestinal organoids using microengineered chips. Cell. Mol. Gastroenterol. Hepatol. 5, 669–677.e2. doi: 10.1016/j.jcmgh.2017.12.008

PubMed Abstract | CrossRef Full Text | Google Scholar

Wufuer, M., Lee, G. H., Hur, W., Jeon, B., Kim, B. J., Choi, T. H., et al. (2016). Skin-on-a-chip model simulating inflammation, edema and drug-based treatment. Sci. Rep. 6:37471. doi: 10.1038/srep37471

PubMed Abstract | CrossRef Full Text | Google Scholar

Youn, B. S., Sen, A., Behie, L. A., Girgis-Gabardo, A., and Hassell, J. A. (2006). Scale-up of breast cancer stem cell aggregate cultures to suspension bioreactors. Biotechnol. Prog. 22, 801–810. doi: 10.1021/bp050430z

PubMed Abstract | CrossRef Full Text | Google Scholar

Yu, J., Peng, S., Luo, D., and March, J. C. (2012). In vitro 3D human small intestinal villous model for drug permeability determination. Biotechnol. Bioeng. 109, 2173–2178. doi: 10.1002/bit.24518

PubMed Abstract | CrossRef Full Text | Google Scholar

Yui, S., Nakamura, T., Sato, T., Nemoto, Y., Mizutani, T., Zheng, X., et al. (2012). Functional engraftment of colon epithelium expanded in vitro from a single adult Lgr5 + stem cell. Nat. Med. 18, 618–623. doi: 10.1038/nm.2695

PubMed Abstract | CrossRef Full Text | Google Scholar

Keywords: epithelial barriers, 3D cell culture models, organoids, organ-on-a-chip, microengineered tissues, biofabrication, drug screening, disease modeling

Citation: Torras N, García-Díaz M, Fernández-Majada V and Martínez E (2018) Mimicking Epithelial Tissues in Three-Dimensional Cell Culture Models. Front. Bioeng. Biotechnol. 6:197. doi: 10.3389/fbioe.2018.00197

Received: 28 September 2018; Accepted: 30 November 2018;
Published: 18 December 2018.

Edited by:

Massimo Alberti, Agency for Science, Technology and Research (A*STAR), Singapore

Reviewed by:

Gopu Sriram, Faculty of Dentistry, National University of Singapore, Singapore
Hyun Jung Kim, University of Texas at Austin, United States

Copyright © 2018 Torras, García-Díaz, Fernández-Majada and Martínez. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Vanesa Fernández-Majada, vfernandez@ibecbarcelona.eu
Elena Martínez, emartinez@ibecbarcelona.eu

These authors have contributed equally to this work and shared first authorship

These authors have contributed equally to this work and shared corresponding authorship

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.