AUTHOR=Xie Yuan , Nie Wansheng , Gao Yuchao , Tong Yiheng TITLE=Numerical Investigation on Spray Characteristics With Upstream Flow Pulsation of a Pintle Injector JOURNAL=Frontiers in Aerospace Engineering VOLUME=1 YEAR=2022 URL=https://www.frontiersin.org/journals/aerospace-engineering/articles/10.3389/fpace.2022.876191 DOI=10.3389/fpace.2022.876191 ISSN=2813-2831 ABSTRACT=

The volume of fluid (VOF) model and the adaptive mesh refinement (AMR) method are used to study the spray characteristics of a gas–liquid pintle injector and the effects of mass flow pulsation of liquid on it. A pintle injector is a thrust adjusting device that changes the injection area using movable parts. Pressure pulsation in the supply pipeline is simulated by periodically changing the mass flow rate of the inlet. Spray characteristics with constant and pulsating upstream flows are compared with each other. The effect of frequency and amplitude of upstream liquid flow pulsation on the spray performance was studied. The results reveal that holding the mass flow rate of the upstream liquid flow constant, under the impact of gas flow, the liquid block, the liquid filament, and a large number of small droplets are peeled off from the liquid film. The film breakup position stays relatively fixed, and the spray has a conical shape. However, when the upstream liquid flow is pulsating, the film breakup position changes periodically, and the spray has a “Christmas tree”-shape. The pulsation frequency has little effect on the spray angle. But it strongly determines the droplet size and the spatial distribution of the spray. In addition, the pulsation amplitude can enhance the phenomenon of “Christmas tree.” With the increase in pulsation amplitude, the liquid film at the outlet of the pintle injector appears with a periodic phenomenon of “contraction–expansion.”