Skip to main content

ORIGINAL RESEARCH article

Front. Vet. Sci., 06 January 2022
Sec. Livestock Genomics
This article is part of the Research Topic Omics Technologies in Livestock Improvement: From Selection to Breeding Decisions View all 30 articles

Function Identification of Bovine ACSF3 Gene and Its Association With Lipid Metabolism Traits in Beef Cattle

  • 1College of Animal Science, Jilin University, Changchun, China
  • 2College of Coastal Agricultural Sciences, Guangdong Ocean University, Zhanjiang, China
  • 3Institute of Animal Sciences, Chinese Academy of Agricultural Sciences, Beijing, China

Acyl-CoA synthetase family member 3 (ACSF3) carries out the first step of mitochondrial fatty acid synthesis II, which is the linkage of malonate and, to a lesser extent, methylmalonate onto CoA. Malonyl-coenzyme A (malonyl-CoA) is a central metabolite in mammalian fatty acid biochemistry that is generated and utilized in the cytoplasm. In this research, we verified the relationship between expression of the ACSF3 and the production of triglycerides (TGs) at the cellular level by silencing and over-expressing ACSF3. Subsequently, through Sanger sequencing, five polymorphisms were found in the functional domain of the bovine ACSF3, and the relationship between ACSF3 polymorphism and the economic traits and fatty acid composition of Chinese Simmental cattle was analyzed by a means of variance analysis and multiple comparison. The results illustrated that the expression of ACSF3 promoted triglyceride synthesis in bovine mammary epithelial cells and bovine fetal fibroblast cells. Further association analysis also indicated that individuals with the AG genotype (g.14211090 G > A) of ACSF3 were significantly associated with the fatty acid composition of intramuscular fat (higher content of linoleic acid, α-linolenic acid, and arachidonic acid), and that CTCAG haplotype individuals were significantly related to the fatty acid composition of intramuscular fat (higher linoleic acid content). Individuals with the AA genotypes of g.14211055 A > G and g.14211090 G > A were substantially associated with a larger eye muscle area in the Chinese Simmental cattle population. ACSF3 played a pivotal role in the regulation of cellular triacylglycerol and long-chain polyunsaturated fatty acid levels, and polymorphism could serve as a useful molecular marker for future marker-assisted selection in the breeding of intramuscular fat deposition traits in beef cattle.

Introduction

As there are large numbers of Chinese Simmental cattle breeding groups, verifying the gene function of this breed's high-quality traits is an area in need of urgent research. The Chinese Simmental has become a large-scale dairy and meat breed in China since it was successfully selected and bred in 2001. In recent years, with the maturity of sequencing technology, new association studies have been conducted to assess whether genetic polymorphisms affect the economic traits and fatty acid composition in cattle (1, 2). Molecular marker information can be used as a useful tool for evaluating breeding value and selecting animal carcass and meat traits.

Fatty acid synthesis occurs through two pathways, one of which takes place in cellular structures called mitochondria. Mitochondria convert the energy from food into a form that cells can use, and fatty acid synthesis in these structures is essential for their proper functioning. The ACSF3 enzyme is found only in the mitochondria and is involved in mitochondrial fatty acid synthesis. The ACSF3 provides instructions for making an enzyme involved in the formation (synthesis) of fatty acids, which are the building blocks used to make fats (lipids) (3). The ACSF3 enzyme performs a chemical reaction that converts malonic acid to malonyl-CoA, which is the first step of fatty acid synthesis (4). Based on this activity, the enzyme is classified as a malonyl-CoA synthetase (5). The ACSF3 enzyme also converts methylmalonic acid to methylmalonyl-CoA, making it a methylmalonyl-CoA synthetase as well (6). Studies have shown that the single nucleotide polymorphism of ACSF3 may be related to meat quality traits, such as backfat thickness (7, 8). The bovine ACSF3 gene is located on bovine chromosome 18:14,209,800–14,248,433 and has 10 exons and 9 introns. The ACSF3 mRNA sequence contains a 1,761 bp coding region (CDS) and a 276 bp untranslated region. The open reading frame (ORF) encodes 586 amino acids and has a 94 and 84% homology with the coding regions of sheep and swine, respectively. The transcriptome analysis results of our previous study showed that ACSF3 was a candidate gene related to bovine fat deposits. However, the ACSF3 gene has been rarely studied in bovine lipid metabolism.

This study aims to reveal the regulatory effect of ACSF3 on adipogenesis by intracellular gene RNA interference (RNAi) and gene over-expression. Moreover, we investigate the polymorphisms of the bovine ACSF3 gene functional domain to explore the relationship between genotypes and fat deposition, and the fatty acid composition traits of Chinese Simmental cattle.

Materials and Methods

Ethics Statements

All the animal experiments in the present study strictly complied with the relevant regulations regarding the care and use of experimental animals issued by the Animal Protection and Use Committee of Jilin University [permit no. SYXK(Ji) pzpx20181227083].

Experimental Materials

The BMECs (bovine mammary epithelial cells) in this study were purified and cultured according to the previous work carried out by the Laboratory of Bovine Genetic Resources and Functional Genomics (9). Briefly, bovine mammary tissues were cut into 1 mm3 nubbles and washed again with PBS solution until the tissue was clean. The smaller pieces of tissue were transferred onto cell culture dishes. A basal media was prepared in advance: DMEM/F12 with 10% fetal bovine serum, 1% penicillin and streptomycin (Hyclone, Logan, UT, USA), and 1% epithelial growth factor. Next, the cell culture dishes with the tissue were incubated at 37°C in a 5% CO2 incubator. After 6 h, 5 mL of basal media were added to each dish, ensuring that the tissue would not float and separate from the bottom of the culture dish. The basal media was replaced with fresh media every 48 h until the culture dish was full of cells. The cells were detached with 0.25% trypsin-0.02%EDTA (Hyclone, Logan, UT, USA) and transferred to new culture dishes that were used to remove the fibroblasts. Subsequently, pure mammary epithelial cells were isolated after 3–5 passages.

The BFFs (bovine fetal fibroblast cells) were isolated and preserved by the Genetic Breeding and Reproduction Laboratory of Jilin University. Briefly, the BFFs were obtained by isolating fetal bovine ear tip tissue using a tissue block apposition method similar to that described above.

This study involved 135 Chinese Simmental cattle (28-month-old bulls) from a Baolongshan cattle farm in Inner Mongolia. These cattle were randomly selected from the offspring of a Simmental cattle population with ~2,000 cows and 25 bulls. Blood samples (10 mL each) were collected from jugular vein with anticoagulant (Acid citrate dextrose, ACD) and stored in −70°C. DNA was extracted from 1 mL whole blood with the DNA extraction kit (Tiangen, Beijing, China) according to the manufacturer's protocol.

Trait Analysis

In this study, 36 traits were measured and 14 fatty acid compositions of the Longissimus dorsi muscle were analyzed (10, 11).

Before the measurements of carcass and fat deposition traits, all the carcasses were stored in refrigerating chambers at the temperature between 0 and 4 °C for 24 h. All the measurements complied with the criterion GB/T17238-1998 cutting standard of fresh and chilled beef of China (China Standard Publish). Before slaughter, ultima live backfat thickness, body weight and longissimus muscle area (by ultrasound) were recorded. The weights of carcass, omental fat, mesenteric fat, kidney fat (stripping kidney fat and weighting) was recorded at the slaughter plant. And we also record fat coverage rate, marbling score, fat color score, muscle color score, rib eye area, and backfat thickness after slaughter. Weight of kidney fat was expressed as an absolute value and also as a percentage of hot carcass weight. Carcass yield was calculated as (hot carcass weight × 100)/final weight. Marbling was measured by video image analysis and expressed as the percentage of visible fat area over the total area of a steak (Longissimus thoracis muscle taken between the 9 th and 10 th vertebrae from the right side of the carcass). Moreover, the carcass length (measuring the shortest length between the bun midpoint to the sciatic trailing edge), carcass chest depth (measuring the shortest distance of the test cattle between bun posterior border to pectoral by using a ruler), hind leg circumference (measuring the surrounded degree in the junction of femur tibia and fibula), hind leg width (measuring the horizontal width since the end of the medial sag to thigh front), thigh meat thickness (the vertical distance from the surface to the midpoint of the autologous femoral body) and other carcass traits were recorded at the slaughter plant.

Briefly, intramuscular fat was obtained from the Longissimus dorsi muscle. The analysis was performed in accordance with the ISO 5,509 (2,000) norms, and AOAC procedures (Association of Official Analytical Chemists), and expressed as g/100 g of fresh tissue. The intramuscular fat was collected in a glass methylation tube, mixed with 4.0 mL of MeOH, 2.0 mL of chloroform (capillary GC; Sigma-Aldrich, MO, USA), and 1.5 mL of ddH2O, and placed in a rotating platform shaker for 10 s, then left at room temperature for 15 min. Chloroform and ddH2O were added to the wells and mixed again, and left at room temperature for 5 min. The mixture was centrifuged at 1,500 g/min for 30 min, then cooled to 16°C, the upper layer removed, and dried under nitrogen. Next, 1.5 mL of 14% BF3/MeOH reagent were added and mixed vigorously. The mixture was heated at 90°C for 30 min, cooled to room temperature, and 4.0 mL of hexane was added, then methyl esters were extracted in the hexane phase following the addition of 1.5 mL of ddH2O. The samples were centrifuged for 1 min, and then the upper hexane layer was removed and concentrated under nitrogen. Fatty acid methyl esters were analyzed by gas chromatography using a fully automated HP5890 system (Agilent, Santa Clara, CA, USA) equipped with a flame-ionization detector. An SP-2,560 column (Supelco, PA, USA) 100 m × 0.25 mm × 0.20 μm was used for gas chromatographic detection. The detection procedure was in an oven at 140°C for 5 min, 10°C/min to 220°C, and held for 50 min. An injector/detector was used at 260°C with helium as a carrier gas at about 5 psi. The identification of components was carried out by a comparison of the retention times with those of authentic standards (Sigma-Aldrich, MO, USA).

Primer Design

Primer Premier 6 software (PREMIER Biosoft, San Francisco, CA, USA) was utilized to design the ACSF3 gene coding sequence primers and the SNP primers, based on the bovine ACSF3 gene's existing published sequences (ENSBTAG00000015968).

Construction of pGPU6/GFP/NEO-shACSF3 Vector and pBI-CMV3-ACSF3 Vector

The constructed RNAi-vector pGPU6/GFP/NEO-shACSF3 with a size of 5276 bp and containing the shRNA sequence of bovine ACSF3 gene. The enhanced green fluorescent protein (EGFP) gene was used for transient expression in cells, and kanamycin was used as a selection marker for prokaryotic cell (DH5α) amplification (Figures 2A-II). The shRNA target sequences of bovine ACSF3 mRNA were screened and designed by BLOCK-iT™ RNAi Designer (https://rnaidesigner.thermofisher.com/rnaiexpress/, Table 1). The shRNA sequence was cloned into a pGPU6/GFP/Neo vector (GenePharma Corporation, Shanghai, China) using the BbsI and BamHI (New England Biolabs, MA, USA) restriction enzyme digestion method. The eukaryotic expression vector pGPU6/GFP/Neo was double digested with BbsI and BamHI in a 10 μL reaction system: BbsI 0.75 μL, BamHI 0.75 μL, NEBuffer 2.1™ 1 μL, pGPU6/GFP/Neo plasmid 2 μL, Nuclease-free water 4.5 μL, and incubated at 37°C 5 h. Recovered and ligated by T4 DNA Ligase (Takara, Dalian, China): T4 DNA Ligase Buffer 2 μL, T4 DNA Ligase 1 μL, pGPU6/GFP/NEO vector 1 μL, shRNA fragment 1 μL, Nuclease-free water 15 μL and incubated at 4°C overnight. The products were transformed into competent E. coli (DH5α) cells (Tiangen, Beijing, China), and then prepared the pGPU6/GFP/NEO-shACSF3 plasmid. The kanamycin-positive clones were picked out and transferred to 200 mL of liquid Luria-Bertani (LB) medium and shaken overnight at 37°C. The pGPU6/GFP/NEO-shACSF3 plasmids were extracted using the EndoFree Maxi Plasmid Kit (Tiangen, Beijing, China) according to the manufacturer's protocol. Briefly, the bacterial broth was centrifuged to obtain the precipitate, fully lysed and removed the endotoxin, and rinsed with enzyme-free water to obtain the plasmid. The concentration and purity of the plasmids were assessed using the agarose gel and spectrophotometer (Nanodrop 2,000, Thermo Scientific, Waltham, MA, USA).

TABLE 1
www.frontiersin.org

Table 1. The primer sequences.

The constructed overexpression vector pBI-CMV3-ACSF3, which is 5,539 bp in size and contains the sequence of the CDS region of bovine ACSF3 gene. The reef coral Zoanthus sp. green fluorescent protein (ZsGreen) gene was used for transient expression in cells and ampicillin was used as a selection marker (Figures 2A-IV). The CDS region of ACSF3 synthesized by Sangon Biotech (Shanghai, China) was ligased into a pBI-CMV3 vector (Clontech Laboratories, Mountain View, CA, USA) using the MluI and HindIII (New England Biolabs, MA, USA) enzyme digestion method. Briefly, using the method similar to that described above, the resistance was replaced with ampicillin. The ampicillin-positive clones were picked out and transferred to 200 mL of liquid Luria-Bertani medium and shaken overnight at 37°C. The pBI-CMV3-ACSF3 plasmid was extracted using the EndoFree Maxi Plasmid Kit (Tiangen, Beijing, China) according to the manufacturer's protocol.

The Culture and Transfection of BMECs and BFFs

The BMECs and BFFs were proliferated for 24 h in six-well plates (Jet Bio-Filtration Co., Ltd, Guangzhou, China), and the final concentration of cells was 1.2 × 106 cells per well. Each well was supplemented with 2 mL of growth medium containing DMEM/F12 (Corning, NY, USA) and 10% fetal bovine serum (FBS; Tian Hang, Zhejiang, China), then incubated at 37°C in a 5% CO2 incubator (Thermo Fisher Scientific, Massachusetts, USA).

In this study, the cells transfected with pGPU6/GFP/NEO-shACSF3 vector were used as RNA interference group, and cells transfected with pGPU6/GFP/NEO vector were used as the control. While the cells transfected with pBI-CMV3-ACSF3 vector were used as the ACSF3 gene over-expression group, cells transfected with pBI-CMV3 vector were used as the control. After referring to similar experimental methods in published articles, this experiment adopted a transient transfection method, using the cells 48 h after the vector was transfected into the cells for subsequent experiments (12, 13).

For transfection, each vector DNA (3.0 μg) and 7.5 μL of FuGENE HD transfection reagent (Promega, Madison, Wisconsin, USA) were diluted in 150 μL of DMEM/F12 media and mixed lightly. The mixture was incubated at room temperature for 15 min and then added to the pores of each six-well plate. The cell culture medium was replaced after 6 h of transfection. After 36 h of transfection, green fluorescent protein (GFP) expression was detected with a fluorescence microscope (NikonTE2000, Tokyo, Japan). The efficiency of transfection was also determined by calculating the ratio of cells positive for green fluorescent protein expression to the total number of cells. The experiment was repeated three times.

Analysis of mRNA Levels of ACSF3 in Transfected BMECs

The transfected cells were collected for analysis of the mRNA expression levels. RNAiso Plus reagent (Takara, Dalian, China) was used to extract the total RNA from cultured cells for reverse transcription. cDNA was synthesized using a reverse transcription kit (TransGen Biotech, Beijing, China), 1 μg of total RNA, 4 μL of 5 × EasyScript® All-in-One SuperMix for qRT-PCR, and 1 μL of gDNA remover, and RNA-free water was added to make the total volume of 20 μL. The cDNA synthesis conditions were: incubate at 42°C for 15 min, and at 85°C for 5 s. Quantitative real-time PCR (qRT-PCR) was followed through with SYBR Green Real-Time PCR Master Mix (Takara, Dalian, China) utilizing the specific primers shown in Table 1. qRT-PCR was performed in a 10 μL reaction with 5 μmoles in 0.5 μL of forward primer, 5 μmoles in 0.5 μL of reverse primer, 5 μL of SYBR Green Real-Time PCR Master Mix (Roche, Basel, Switzerland), 1 μL of cDNA, and 3 μL of ddH2O, using the following procedure: 95°C for 30 s and 45 cycles of 95°C for 5 s, and 60°C for 30 s in a PCRmax (Eco, Staffordshire, UK). Experiments were repeated three times. Three technical replicates were analyzed for each sample and β-actin was used as an internal standard to normalize the mRNA expression level using the 2−ΔΔCT method.

Determination of Triglyceride Content in Cells of ACSF3 Interference and Overexpression

In BMECs after interference or the overexpression of ACSF3, the detection of TGs was performed with a tissue and cell TG assay kit (Applygen Technologies Inc., Beijing, China) according to the manufacturer's protocol. Meanwhile, ACSF3 was over-expressed in the BFFs and the TG content was examined. The optical density of each sample was determined using a microplate reader (Yong Chuang SM600, Shanghai, China). The experiment was repeated three times and three technical replicates were performed for each sample. The data regarding the triglyceride in the cells were adjusted based on the quantity of the protein, and the cellular content of triglyceride was corrected for the protein concentration of each μg.

Polymorphic Loci Detection in ACSF3 Gene and Genotyping

We used a 20 μL system for PCR amplification, combining 10 pmol/μL of each primer, 140 ng of bovine genomic DNA, and 10 μL of green Taq mix, according to the manufacturer's protocol (Vazyme, Nanjing, China). The PCR amplification conditions were as follows: incubation of the PCR mixture at 95°C for 5 min, 35 cycles of 95°C for 30 s, the annealing temperature of each fragment for 30 s, 72°C for 1,000 bp/min, and a final extension at 72°C for 10 min. The annealing temperature of the polymorphism fragments of ACSF3 were 60°C. The DNA samples of 135 Chinese Simmental were amplified by PCR. Next, PCR amplification was performed with the primer pairs of SNPs of ACSF3 as per Table 1. The specificity of PCR products was detected by 2% agarose gel electrophoresis. Nucleotide sequences of PCR products were determined by Sanger sequencing (Sangon Biotech Shanghai, China). Briefly, the nucleotide sequence of the amplified product was determined by double-stranded sequencing using the Sanger di-deoxy chain termination method. Finally, the genotypes of the cattle at each SNP were verified by the sequencing results. Haplotype analysis of the SNPs was performed using Haploview v.4.2 (https://www.broadinstitute.org/haploview/haploview).

Statistical Analysis

Some relevant data relating to SNPs on the ACSF3 were calculated according to the genotyping results, which were the genotypic frequency, Hardy–Weinberg test, linkage disequilibrium analysis, and polymorphism information content. The genotype frequencies and allele frequencies were calculated for the examined Chinese Simmental-cross steers and were analyzed by the significance test. An analysis of the genotypic effects of the ACSF3 was carried out using the GLM procedure of SPSS 13.0 for Windows.

Yijk=u+ysi+mj+eijk

where Yijk was the phenotypic observation of the kth individual from the Simmental breed of genotype j in the ith-year season, u was the population mean, ysi was the year effect of the ith-year season, mj was the genotype effect of the genotype j, and eijk was the random residual effect corresponding to the observed value (10).

Results

ACSF3 Gene Structure Prediction and Protein Interaction Prediction in Lipid Metabolism Pathways

SWISS-MODEL (https://swissmodel.expasy.org/) predicted the tertiary structure of the ACSF3 protein (Figure 1A) (14). Protein interaction analysis was performed with STRING (https://cn.string-db.org/) (15). Bioinformatic data showed that 10 proteins, such as FASN, ACADSB, ACADS, ACACA, and ACACB, can interact with the ACSF3 protein (Figure 1B). The fatty acid biosynthesis and metabolism process GO terms in the biological process were enriched, implying that ACSF3 may be involved in the fatty acid biosynthetic process (GO:0006633) and the fatty acid metabolic process (GO:0006631).

FIGURE 1
www.frontiersin.org

Figure 1. ACSF3 gene structure prediction and protein interaction prediction in lipid metabolism pathways (14, 15). (A) Tertiary structure of ACSF3 protein (prediction). (B) Interacting proteins for ACSF3 gene in lipid metabolism pathway of cells.

The Effect of ACSF3 Gene Expression Level on Triglyceride Content in Cells

According to the sequencing results, the siRNA target oligonucleotide sequences for ACSF3 were successfully cloned and framed into the BamHI/BbsI sites of the pGPU6/GFP/NEO vector. Meanwhile, the CDS fragments of ACSF3 were cloned into the multiple cloning site (MluI/HindIII) of pBI-CMV3 plasmid. The green fluorescence of the transfected cells was observed in each group under fluorescent microscopy after 24 h of transfection (Figure 2), indicating that plasmids were successfully transfected into BMECs.

FIGURE 2
www.frontiersin.org

Figure 2. Effect of ACSF3 gene interference or overexpression on triglyceride synthesis of transfected cells. (A) The maps of vectors used in this study including size. I: Control vector for RNA interference of ACSF3 gene (pGPU6/GFP/NEO); II: RNA interference vector of ACSF3 gene (pGPU6/GFP/NEO-shACSF3); III: Control for ACSF3 gene over-expression vector (pBI-CMV3); IV: ACSF3 gene over-expression vector (pBI-CMV3-ACSF3). (B) Expression of green fluorescence protein was observed in two vector groups under fluorescent microscopy. I: Cells transfected with pGPU6/GFP/Neo vectors; II: Cells transfected with pGPU6/GFP/NEO-shACSF3 vectors; III: Cells transfected with pBI-CMV3 vectors; IV: Cells transfected with pBI-CMV3-ACSF3 vectors. (C) The relative mRNA expression level of ACSF3 mRNA in the two groups transfected with BMECs. I: Cells transfected with pGPU6/GFP/Neo or pGPU6/GFP/NEO-shACSF3 vectors; II: Cells transfected with pBI-CMV3 or pBI-CMV3-ACSF3 vectors. (D) The two vector groups caused changes in triglyceride content after transfection of BMECs. I: Cells transfected with pGPU6/GFP/NEO-shACSF3 vector caused a decrease in triglyceride content; II: Cells transfected with pBI-CMV3-ACSF3 vector caused an increase in triglyceride content. (E) Overexpression vectors transfected with BFFs caused changes in triglyceride content. I: Cells transfected with pBI-CMV3 vectors; II: Cells transfected with pBI-CMV3-ACSF3 vectors. III: Cells transfected with pBI-CMV3-ACSF3 vector caused an increase in triglyceride content. *** means p < 0.001, ** means p < 0.01.

To investigate the effect of the pGPU6/GFP/NEO-shACSF3 and pBI-CMV3-ACSF3 vectors on the bovine ACSF3 expression level, the relative mRNA expression level of ACSF3 was analyzed by qRT-PCR. Compared with the control group, the mRNA expression of ACSF3 in the pGPU6/GFP/NEO-shACSF3 group was significantly reduced (p < 0.01, Figures 2C-I). Moreover, the expression level of ACSF3 mRNA in the pBI-CMV3-ACSF3 group was significantly increased compared with the control group (p < 0.01, Figures 2C-II).

The triglyceride contents of BMECs after transfection with the pGPU6/GFP/NEO-shACSF3 and pBI-CMV3-ACSF3 vectors were investigated. The results demonstrated that, compared with the control group, the content of TGs in the pGPU6/GFP/NEO-shACSF3 group had a decreasing trend (Figures 2D-I). In addition, the content of TGs in the pBI-CMV3-ACSF3 group increased significantly (p < 0.01, Figures 2D-II). Similarly, the results of ACSF3 on TG content in BFFs are consistent with our validation on BMECs, where an over-expression of the ACSF3 elevated triglyceride content in both types of cells (p < 0.01, Figures 2E-III). These results indicated that ACSF3 could promote the synthesis of triglyceride in the lipid metabolism pathway.

The Effect of ACSF3 Gene Expression on Lipid Metabolism-Related Genes

To further investigate the regulation of ACSF3 on BMECs lipid metabolism-related genes, the expression levels of the related genes that interacted with the ACSF3 gene in the lipid metabolism pathway were analyzed. The mRNA expression level of the CCAAT/enhancer binding proteinα (CEBPα), fatty acid synthase (FASN), and acetyl-CoA carboxylase beta (ACACB) gene in the pGPU6/GFP/NEO-shACSF3 group was significantly increased compared with the control group (p < 0.01, Figure 3A). The mRNA expression level of the malonyl-CoA-acyl carrier protein trans acylase (MCAT) gene in the pGPU6/GFP/NEO-shACSF3 group increased. Nevertheless, the mRNA levels of the acetyl-CoA carboxylase alpha (ACACA) gene of the pGPU6/GFP/NEO-shACSF3 group were significantly lower than the control group (p < 0.01). In addition, in comparison with the control group, the mRNA expression levels of the above genes in the pBI-CMV3-ACSF3 group exhibited an opposite trend (Figure 3B).

FIGURE 3
www.frontiersin.org

Figure 3. The mRNA expression of lipid metabolism-related genes in BMECs after interference (A) or overexpression of (B) the ACSF3 gene. *** means p < 0.001, ** means p < 0.01, * means p < 0.05.

Genetic Diversity of the Functional Domain of ACSF3 Gene in Chinese Simmental Cattle

Meanwhile, we screened for SNPs in the key functional domain of the bovine ACSF3 in the Chinese Simmental cattle population. According to the PCR product sequencing results, there were five polymorphisms (g.14210566 C > T, g.14210668 C > T, g.14210887 T > C, g.14211055 G > A, and g.14211090 A > G) screened in the second exon of the ACSF3 gene in Chinese Simmental cattle (Figure 4A). Among the five loci screened, the g.14211090 A > G locus was a missense mutation (arginine to glutamine), while the other four sites were synonymous mutations. The allele frequency and genotype frequency of five ACSF3 SNPs in Chinese Simmental cattle are presented in Figure 4. Allele C had frequencies of 0.934, 0.798, and 0.954 at the g.14210566 C > T, g.14210668 C > T, and g.14210887 T > C polymorphism sites. Allele A had a frequency of 0.926 at the g.14211055 G > A polymorphism site. Allele G had a frequency of 0.892 at the g.14211090 A > G polymorphism site (Figure 4B).

FIGURE 4
www.frontiersin.org

Figure 4. Detection and genotyping of Single-nucleotide polymorphism sites of the ACSF3 gene in Chinese Simmental cattle. (A) Identify five SNPs in the second exon of the ACSF3 gene. (B) Gene frequency and genotype frequency of five SNPs of ACSF3 gene. (C) The haplotypes composed of five SNPs of ACSF3 gene and the frequency analysis of haplotypes.

A haplotype analysis was performed on five SNPs loci in this population. Among the different genotypes, the frequency of the three haplotypes (CCCAG, CTCAG, and CCCAA) was higher than 0.03, and the frequency of the haplotype CCCAG was 0.496, which was the major haplotype (Figure 4C).

Association Analysis of ACSF3 Gene SNP With Economic Traits and Fatty Acids in Chinese Simmental Cattle

Regarding economic traits, the association analysis results revealed that, at the g.14211090 G > A locus, for the individuals with the G allele homozygous, a higher value of the eye muscle area, spleen weight, and oxtail weight (71.33 ± 8.80 cm2, 0.75 ± 0.14 kg, and 1.17 ± 0.19 kg) were observed compared with the heterozygous (65.20 ± 5.90 cm2, 0.65 ± 0.10 kg, and 1.03 ± 0.17 kg) individuals (p = 0.038, 0.040, 0.037, Table 2). Furthermore, the individuals with the TT genotype (5.99 ± 0.29) at g.14210668 C > T had a significantly higher pH (24h) than individuals with the CT genotype (5.80 ± 0.17, p = 0.008). The values of the dressing percentage in individuals of the TT genotype (51.82 ± 1.70%) were also significantly higher than in that of the CT genotype (50.13 ± 2.42%, p = 0.038). The g.14210566 C > T and g.14211055 A > G loci showed a strong linkage relationship (r2 = 0.887, LOD = 19.92).

TABLE 2
www.frontiersin.org

Table 2. Association analysis of five SNPs in the second exon of ACSF3 gene and economic traits in Chinese Simmental Cattle.

Regarding fatty acid composition, as shown in Table 3, the linoleic acid content of the AG genotype (0.131 ± 0.056 g/100g) at the g.14211090 G > A locus was significantly higher than that of the GG genotype (0.101 ± 0.032 g/100g, p = 0.008, Table 3). The individuals with the TT genotype (0.130 ± 0.054 g/100g) at the g.14210668 C > T locus had higher linoleic acid than the other two genotypes (0.102 ± 0.035 g/100 g, 0.100 ± 0.029 g/100g, p = 0.023, p = 0.022). Similarly, individuals with the TC genotype (0.129 ± 0.054 g/100g) at the g.14210887 C > T locus had higher levels of linoleic acid than the other genotype (0.102 ± 0.032 g/100g, p = 0.017).

TABLE 3
www.frontiersin.org

Table 3. Association analysis of five SNPs in the second exon of ACSF3 gene and fatty acids in Chinese Simmental Cattle.

Correlation Analysis of Polymorphic Locus Haplotypes, Economic Traits and Fatty Acids in Chinese Simmental Cattle

The haplotype CTCAG was significantly correlated with pH (24 h) and fat color score (6.03 ± 0.27, 5.87 ± 0.18, 4.00 ± 0.93, 3.51 ± 0.59, p = 0.022, and p = 0.042, Table 4), and the weight of the lung and trachea was significantly higher than in other haplotype individuals (2.90 ± 0.35 kg, 2.23 ± 0.30 kg, p= 0.002). The front hoof weight of the haplotype CCCAG (5.71 ± 0.53 kg) was significantly higher than that of CCCAA (5.13 ± 0.52 kg, p = 0.044), the weight of oxtail (1.20 ± 0.19 kg) was significantly higher than that of CTCAG (1.03 ± 0.16 kg, p = 0.015), and the weight of the testis (0.63 ± 0.12 kg) was significantly higher than that of CCCAA (0.46 ± 0.10 kg, p = 0.004). Similar to the results of the correlation analysis between SNPs and fatty acid content, the content of linoleic acid in haplotype CTCAG (0.130 ± 0.058 g/100g) was significantly higher than that of haplotype CCCAG (0.097 ± 0.028 g/100 g, p < 0.01, Table 5).

TABLE 4
www.frontiersin.org

Table 4. Association analysis of three haplotypes and economic traits in Chinese Simmental Cattle.

TABLE 5
www.frontiersin.org

Table 5. Association analysis of three haplotypes and fatty acids in Chinese Simmental Cattle.

Discussion

The candidate genes associated with carcass and meat quality traits have been extensively validated in the livestock industry in the expectation of obtaining better economic characteristics. Single nucleotide polymorphisms as DNA markers for genetic and molecular breeding preferences, combining gene function studies with association analysis is more conducive to fully explore the relationships and characteristics of genes. We performed transcriptome sequencing analysis in cattle with different fat deposition traits and obtained differentially expressed genes, including ACSF3. Acyl-CoA synthetase family member 3 (ACSF3), an essential enzyme that activates fatty acids through the formation of thioester bonds to form acyl-CoA, serves as the substrate for both de novo fatty acid synthesis and oxidation (16). ACSF3 is valuable to be studied as a gene that plays a role in the process of lipid metabolism.

In this study, we successfully constructed the RNA interference and over-expression vectors of ACSF3, and found that ACSF3 mRNA levels were positively correlated with triglyceride content in cells. Five SNP loci were screened in a population of 135 Chinese Simmental cattle, and haplotype analysis and association analysis were performed on these five SNP loci. The association between SNP loci, haplotypes and economic traits and fatty acid composition was investigated, and the results showed that these five SNP loci and haplotypes were significantly associated with economic traits and fatty acid composition of Chinese Simmental cattle.

Both milk lipid metabolism and meat lipid metabolism are of interest in livestock industry research, and in the present study, we were surprised to find that increased mRNA levels of ACSF3 caused an increase in triglyceride content in both BMECs and BFFs. This suggested to us that ACSF3 may play a similar role in lipid metabolism, without tissue specificity. This may be due to main role of ACSF3 is to activate the toxic, endogenous antimetabolite malonate into malonyl-CoA that can be decarboxylated to acetyl-CoA and therefore fully oxidized within the TCA cycle. And one function of ACSF3 that has been proposed was that it generated malonyl-CoA in the matrix of the mitochondria to enable mitochondrial type II (mtFASII) fatty acid synthesis (17, 18).

We found that it was co-annotated with genes such as FASN and ACACA in the fatty acid biosynthesis and fatty acid metabolism pathway of KEGG by predicting the ACSF3 protein interaction network. We hypothesized that ACSF3 may affect genes related to lipid metabolism and thus affect lipid metabolism. In the mitochondria, ACSF3 links malonate to CoA, producing malonyl-CoA. In addition, when ACACA is inhibited, TG synthesis will also be inhibited, and at the same time, fatty acid synthesis is inhibited and fatty acid oxidation is stimulated (19). The results of our qRT-PCR showed that the mRNA expression levels of ACACA and ACSF3 changed consistently. This may be due to the coordination of mammalian ACACA and ACSF3 to produce the malonyl-CoA required for mitochondrial fatty acid synthesis, indicating that ACACA also plays an essential role in acetyl-CoA sensing. In mitochondria, malonyl-CoA is the main signal of energy metabolism (20). It has been proved that FASN inhibition leads to a rapid increase in malonyl-CoA in cells (21). The result may be the reason why we found that ACSF3 and FASN have a negative regulatory relationship at the mRNA level.

We screened five SNP loci in Chinese Simmental cattle population, where the SNP of the g.14211090 A > G loci triggered missense mutations that resulted in the conversion of the encoded amino acid from arginine to glutamine. In human metabolic diseases research, ACSF3 as a cause of combined malonic and methylmalonic aciduria (CMAMMA) has been studied. Mutations in ACSF3 were identified, encoding the putative methylmalonyl-CoA and malonyl-CoA synthase as the cause of CMAMMA (16). A similar study found a homozygous missense allele in the non-classical CMAMMA candidate gene ACSF3 in patients (22). Hence, it is worth investigating whether the mutation of ACSF3 could be used as an early molecular marker for the detection of lipid metabolism in bovine.

For the carcass traits of Chinese Simmental cattle, the g.14210566 C > T and g.14211055 A > G loci were significantly associated with the liveweight and carcass weight. These results suggest that these two SNPs may be associated with growth and development in cattle. For meat quality traits of Chinese Simmental cattle, the g.14210566 C > T, g.14211055 A > G, and g.14211090 G > A loci were found to be significantly associated with the eye muscle area. In Angus bulls, eye muscle area had positive genetic (57%) and phenotypic (56%) correlations with liveweight (23). The reason why the g.14210566 C > T and g.14211055 A > G loci were found to be associated with live weight and eye muscle area was attributed to the fact that eye muscle area is genetically associated with live weight and meat quality.

Similarly, the results of an association analysis of pork quality traits and whole genomes showed that ACSF3 was a candidate gene related to intramuscular fat (24). We examined the fatty acid composition and content of intramuscular fat, rather than measuring the percentage of intramuscular fat. We were surprised to find that all the five SNPs obtained from the screening were significantly associated with linoleic acid. Linoleic acid is one of the essential fatty acids in the human body. It plays a meaningful role in maintaining many physiological functions of the human body, such as participating in the synthesis of phospholipids and the metabolism of other lipids, and has the effect of significantly lowering serum cholesterol. Studies have shown that ACSF3 is significantly up-regulated in the process of alcoholic liver disease, participates in fatty acid and lipid metabolism, and accelerates liver damage (25). Therefore, the SNPs of ACSF3 can be used as a molecular marker for breeding cattle with high linoleic acidity. The effect of bovine ACSF3 on lipid metabolism is deserving of a follow-up in-depth study. Meanwhile, two SNPs (g.14210887 C > T and g.14211090 G > A) were significantly associated with α-linolenic acid. Linoleic acid and α-linolenic acid are both beneficial to human health as polyunsaturated fatty acids. Breeding individuals with a high polyunsaturated fatty acid content in muscle is the goal of specialized beef breed selection and high-quality beef production. As a consequence, it is of great significance to screen the genes and genetic markers that determine the polyunsaturated fatty acids and to select high-quality beef cattle through the application of molecular breeding techniques such as marker-assisted selection.

The haplotype consisting of five SNPs was also associated with linoleic acid. In an association analysis between SNPs or haplotypes and meat quality traits, only the two traits of fat color score and pH (24 h) were significantly associated. The traits that were considered to be significant in the association analysis of SNPs with traits did not exactly match the results of haplotypes, which may be due to the relatively small population of cattle collected in the current experiment.

In conclusion, the function of the ACSF3 in bovine lipid metabolism was preliminarily analyzed and we proposed an association analysis report combining SNPs with economic traits and fatty acid composition to support molecular marker-assisted selection to predict the association analysis of SNPs with economic traits of beef cattle.

Data Availability Statement

The original contributions presented in the study are included in the article/supplementary material, further inquiries can be directed to the corresponding author/s.

Ethics Statement

The animal study was reviewed and approved by the Animal Protection and Use Committee of Jilin University [permit no. SYXK (Ji) pzpx20181227083].

Author Contributions

WH and XF: conceptualization, validation, and writing—original draft. WH and XL: formal analysis. RY: funding acquisition, project administration, and writing—review & editing. WH, YL, and JL: methodology. ZZ: resources. GL: software. WH and GL: visualization. All authors contributed to the article and approved the submitted version.

Funding

This work was supported by the National Natural Science Foundation of China (31972993), the Jilin Scientific and Technological Development Program (20180101275JC), and Graduate Innovation Fund of Jilin University (101832020CX333).

Conflict of Interest

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Publisher's Note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Acknowledgments

The authors would like to thank the Jiaqi Mi and Xiuqi Zhang for technical support, also thank the Meat Laboratory of the Chinese Academy of Agricultural Sciences for providing assistance with carcass and meat quality determinations.

References

1. Ferraz JB, Pinto LF, Meirelles FV, Eler JP, De Rezende FM, Oliveira EC, et al. Association of single nucleotide polymorphisms with carcass traits in nellore cattle. Genet Mol Res. (2009) 8:1360–6. doi: 10.4238/vol8-4gmr650

PubMed Abstract | CrossRef Full Text | Google Scholar

2. Sasazaki S, Akiyama K, Narukami T, Matsumoto H, Oyama K, Mannen H. UTS2R gene polymorphisms are associated with fatty acid composition in Japanese beef cattle. Anim Sci J. (2014) 85:499–505. doi: 10.1111/asj.12167

PubMed Abstract | CrossRef Full Text | Google Scholar

3. Witkowski A, Thweatt J, Smith S. Mammalian ACSF3 protein is a Malonyl-CoA synthetase that supplies the chain extender units for mitochondrial fatty acid synthesis. J Biol Chem. (2011) 286:33729–36. doi: 10.1074/jbc.M111.291591

PubMed Abstract | CrossRef Full Text | Google Scholar

4. Lombard DB, Zhao YM. ACSF3 and Mal(onate)-Adapted mitochondria. Cell Chem Biol. (2017) 24:649–50. doi: 10.1016/j.chembiol.2017.06.004

PubMed Abstract | CrossRef Full Text | Google Scholar

5. Chen H, Kim HU, Weng H, Browse J. Malonyl-CoA synthetase, encoded by ACYL ACTIVATING ENZYME13, is essential for growth and development of arabidopsis. Plant Cell. (2011) 23:2247–62. doi: 10.1105/tpc.111.086140

PubMed Abstract | CrossRef Full Text | Google Scholar

6. Monteuuis G, Suomi F, Keratar JM, Masud AJ, Kastaniotis AJ. A conserved mammalian mitochondrial isoform of acetyl-CoA carboxylase ACC1 provides the malonyl-CoA essential for mitochondrial biogenesis in tandem with ACSF3. Biochem J. (2017) 474:3783–97. doi: 10.1042/BCJ20170416

PubMed Abstract | CrossRef Full Text | Google Scholar

7. Bovo S, Bertolini F, Schiavo G, Mazzoni G, Dall'olio S, Fontanesi L. Reduced representation libraries from DNA pools analysed with next generation semiconductor based-sequencing to identify SNPs in extreme and divergent pigs for back fat thickness. Int J Genomics. (2015) 2015:950737. doi: 10.1155/2015/950737

PubMed Abstract | CrossRef Full Text | Google Scholar

8. Edea Z, Jung KS, Shin SS, Yoo SW, Choi JW, Kim KS. Signatures of positive selection underlying beef production traits in Korean cattle breeds. J Anim Sci Technol. (2020) 62:293–305. doi: 10.5187/jast.2020.62.3.293

PubMed Abstract | CrossRef Full Text | Google Scholar

9. Lu CY, Yang RJ, Liu BY, Li ZZ, Shen BL, Yan SQ, et al. Establishment of two types of mammary epithelial cell lines from chinese holstein dairy cow. J Animal Vet Adv. (2012) 11:1166–72. doi: 10.3923/javaa.2012.1166.1172

CrossRef Full Text | Google Scholar

10. Fang XB, Zhang LP, Yu XZ, Li JY, Lu CY, Zhao ZH, et al. Association of HSL gene E1-c.276C > T and E8-c.51C > T mutation with economical traits of Chinese simmental cattle. Mol Biol Rep. (2014) 41:105–12. doi: 10.1007/s11033-013-2842-6

PubMed Abstract | CrossRef Full Text | Google Scholar

11. Yu HB, Zhao ZH, Yu XZ, Li JY, Lu CY, Yang RJ. Bovine lipid metabolism related gene GPAM: molecular characterization, function identification, and association analysis with fat deposition traits. Gene. (2017) 609:9–18. doi: 10.1016/j.gene.2017.01.031

PubMed Abstract | CrossRef Full Text | Google Scholar

12. Liao L, Zheng R, Wang C, Gao J, Ying Y, Ning Q, et al. The influence of down-regulation of suppressor of cellular signaling proteins by RNAi on glucose transport of intrauterine growth retardation rats. Pediatr Res. (2011) 69:497–503. doi: 10.1203/PDR.0b013e31821769bd

PubMed Abstract | CrossRef Full Text | Google Scholar

13. Shu K, Xiao Z, Long S, Yan J, Yu X, Zhu Q, et al. Expression of DJ-1 in endometrial cancer: close correlation with clinicopathological features and apoptosis. Int J Gynecol Cancer. (2013) 23:1029–35. doi: 10.1097/IGC.0b013e3182959182

PubMed Abstract | CrossRef Full Text | Google Scholar

14. Waterhouse A, Bertoni M, Bienert S, Studer G, Tauriello G, Gumienny R, et al. SWISS-MODEL: homology modelling of protein structures and complexes. Nucleic Acids Res. (2018) 46:W296–303. doi: 10.1093/nar/gky427

PubMed Abstract | CrossRef Full Text | Google Scholar

15. Szklarczyk D, Gable AL, Nastou KC, Lyon D, Kirsch R, Pyysalo S, et al. The STRING database in 2021: customizable protein-protein networks, and functional characterization of user-uploaded gene/measurement sets. Nucleic Acids Res. (2021) 49:D605–12. doi: 10.1093/nar/gkaa1074. Erratum in: Nucleic Acids Res. (2021) 49:10800.

PubMed Abstract | CrossRef Full Text | Google Scholar

16. Sloan JL, Johnston JJ, Manoli I, Chandler RJ, Krause C, Carrillo-Carrasco N, et al. Exome sequencing identifies ACSF3 as a cause of combined malonic and methylmalonic aciduria. Nature Genetics. (2011) 43:883–U96. doi: 10.1038/ng.908

PubMed Abstract | CrossRef Full Text | Google Scholar

17. Guan X, Nikolau BJ. AAE13 encodes a dual-localized malonyl-CoA synthetase that is crucial for mitochondrial fatty acid biosynthesis. Plant J. (2016) 85:581–93. doi: 10.1111/tpj.13130

PubMed Abstract | CrossRef Full Text | Google Scholar

18. Bowman CE, Wolfgang MJ. Role of the malonyl-CoA synthetase ACSF3 in mitochondrial metabolism. Adv Biol Regul. (2019) 71:34–40. doi: 10.1016/j.jbior.2018.09.002

PubMed Abstract | CrossRef Full Text | Google Scholar

19. Harwood HJ, Petras SF, Shelly LD, Zaccaro LM, Perry DA, Makowski MR, et al. Isozyme-nonselective N-substituted bipiperidylcarboxamide acetyl-CoA carboxylase inhibitors reduce tissue malonyl-CoA concentrations, inhibit fatty acid synthesis, and increase fatty acid oxidation in cultured cells and in experimental animals. J Biol Chem. (2003) 278:37099–111. doi: 10.1074/jbc.M304481200

PubMed Abstract | CrossRef Full Text | Google Scholar

20. Bowman CE, Rodriguez S, Alpergin ESS, Acoba MG, Zhao L, Hartung T, et al. The mammalian Malonyl-CoA synthetase ACSF3 is required for mitochondrial protein malonylation and metabolic efficiency. Cell Chem Biol. (2017) 24:673. doi: 10.1016/j.chembiol.2017.04.009

PubMed Abstract | CrossRef Full Text | Google Scholar

21. Pizer ES, Thupari J, Han WF, Pinn ML, Chrest FJ, Townsend CA, et al. Malonyl-coenzyme-A is a potential mediator of cytotoxicity induced by fatty acid synthase inhibition in human breast cancer cells and xenografts. Clin Cancer Res. (1999) 5:3767s.

PubMed Abstract | Google Scholar

22. Alfares A, Nunez LD, Al-Thihli K, Mitchell J, Melancon S, Anastasio N, et al. Combined malonic and methylmalonic aciduria: exome sequencing reveals mutations in the ACSF3 gene in patients with a non-classic phenotype. J Med Genet. (2011) 48:602–5. doi: 10.1136/jmedgenet-2011-100230

PubMed Abstract | CrossRef Full Text | Google Scholar

23. Robinson DL, Cafe LM, Mckiernan WA. Heritability of muscle score and genetic and phenotypic relationships with weight, fatness and eye muscle area in beef cattle. Anim Prod Sci. (2014) 54:1443–8. doi: 10.1071/AN14347

PubMed Abstract | CrossRef Full Text | Google Scholar

24. Bernal Rubio YL, Gualdron Duarte JL, Bates RO, Ernst CW, Nonneman D, Rohrer GA, et al. Implementing meta-analysis from genome-wide association studies for pork quality traits. J Anim Sci. (2015) 93:5607–17. doi: 10.2527/jas.2015-9502

PubMed Abstract | CrossRef Full Text | Google Scholar

25. Liu Y, Chen SH, Jin X, Li YM. Analysis of differentially expressed genes and microRNAs in alcoholic liver disease. Int J Mol Med. (2013) 31:547–54. doi: 10.3892/ijmm.2013.1243

PubMed Abstract | CrossRef Full Text | Google Scholar

Keywords: Acyl-CoA synthetase family member 3, Chinese Simmental cattle, fat deposition traits, single nucleotide polymorphism, triglyceride (TG)

Citation: He W, Fang X, Lu X, Liu Y, Li G, Zhao Z, Li J and Yang R (2022) Function Identification of Bovine ACSF3 Gene and Its Association With Lipid Metabolism Traits in Beef Cattle. Front. Vet. Sci. 8:766765. doi: 10.3389/fvets.2021.766765

Received: 30 August 2021; Accepted: 13 December 2021;
Published: 06 January 2022.

Edited by:

Mudasir Ahmad Syed, Sher-e-Kashmir University of Agricultural Sciences and Technology, India

Reviewed by:

Jiangjiang Zhu, Southwest Minzu University, China
Nedenia Stafuzza, Animal Science Institute, São Paulo, Brazil

Copyright © 2022 He, Fang, Lu, Liu, Li, Zhao, Li and Yang. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Runjun Yang, eXJqJiN4MDAwNDA7amx1LmVkdS5jbg==

These authors have contributed equally to this work

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.