Skip to main content

ERRATUM article

Front. Mater.
Sec. Computational Materials Science
Volume 11 - 2024 | doi: 10.3389/fmats.2024.1532906

Erratum: Prediction and analysis of strength and economic feasibility of filling materials under the influence of mix proportion and curing age

Provisionally accepted
Frontiers Production Office Frontiers Production Office *
  • Frontiers Media SA, Lausanne, Switzerland

This article is an erratum on:

  1. Prediction and Analysis of Strength and Economic Feasibility of Filling Materials under the Influence of Mix Proportion and Curing Age

    1. Read original article

The final, formatted version of the article will be published soon.

    An erratum on: Prediction and analysis of strength and economic feasibility of filling materials under the influence of mix proportion and curing age. By Zhang Y, Liang H, Fei S, Zhang A, Yu J and Qin X (2024). Front. Mater. 11:1428859. doi: 10.3389/fmats.2024.1428859 Error in Figure Due to a production error, there was a mistake in Figure 1 as published. The corrected Figure 1 appears below. The publisher apologizes for this mistake. The original version of this article has been updated.

    Keywords: Curing age, MLP, LSTM, strength, prediction, economic analysis

    Received: 22 Nov 2024; Accepted: 22 Nov 2024.

    Copyright: © 2024 Production Office. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

    * Correspondence: Frontiers Production Office, Frontiers Media SA, Lausanne, Switzerland

    Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.