Skip to main content

CORRECTION article

Front. Mater., 04 September 2024
Sec. Mechanics of Materials
Volume 11 - 2024 | https://doi.org/10.3389/fmats.2024.1456883

Corrigendum: Fabrication and surface characterization of titanium dioxide nanotubes on titanium implants

This article is a correction to:

  1. Fabrication and surface characterization of titanium dioxide nanotubes on titanium implants

    1. Read original article
Hongming Zheng&#x;Hongming Zheng1†Li Xu&#x;Li Xu1†Yang JiaoYang Jiao2Yan XiaYan Xia1Xinglin WuXinglin Wu3Kaihang LuKaihang Lu3Pengpeng ZhangPengpeng Zhang3Quanming Zhao &#x;Quanming Zhao4*‡Lu Zhang &#x;Lu Zhang4*‡Xiaohui Ni &#x;Xiaohui Ni4*‡
  • 1Department of Orthopedic Surgery, The People’s Hospital of Danyang, Danyang, China
  • 2Department of Stomatology, The Seventh Medical Center of PLA General Hospital, Beijing, China
  • 3Department of Orthopedics, Guizhou Provincial People’s Hospital, Guiyang, Guizhou, China
  • 4Department of Orthopedics, Dafeng People’s Hospital, Yancheng, Jiangsu, China

A Corrigendum on
Fabrication and surface characterization of titanium dioxide nanotubes on titanium implants

by Zheng H, Xu L, Jiao Y, Xia Y, Wu X, Lu K, Zhang P, Zhao Q, Zhang L and Ni X (2023). Front. Mater. 10:1325997. doi: 10.3389/fmats.2023.1325997

In the published article, the funder, National Science Foundation of China (82160415) was omitted. The correct Funding statement appears below.

Funding

The author(s) declare that financial support was received for the research, authorship, and/or publication of this article. This work was supported by the Key Research and Development (Key R & D) plan of Jiangsu Province—social development (BE2021683), Guiyang Science and Technology Plan Project (grant number [2023] 48-23), National Science Foundation of China (82160415), Guizhou Province Excellent Young Science and Technology Talents Project (YQK[2023] 022), Guizhou Provincial Science and Technology Projects (grant number ZK [2024] general 475) and Guizhou Provincial People’s Hospital fund (grant numbers GZSYBS [2022] 01, GZSYQN[2021] 05 and GZSYQN [2022] 03).

The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Keywords: anodic oxidation, TiO2 nanotubes, bioactive coating, corrosion resistance, titanium implants

Citation: Zheng H, Xu L, Jiao Y, Xia Y, Wu X, Lu K, Zhang P, Zhao Q, Zhang L and Ni X (2024) Corrigendum: Fabrication and surface characterization of titanium dioxide nanotubes on titanium implants. Front. Mater. 11:1456883. doi: 10.3389/fmats.2024.1456883

Received: 29 June 2024; Accepted: 27 August 2024;
Published: 04 September 2024.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2024 Zheng, Xu, Jiao, Xia, Wu, Lu, Zhang, Zhao, Zhang and Ni. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Xiaohui Ni, bml4aWFvaHVpQGpzbWMuZWR1LmNu; Lu Zhang, MjI3MjI4Mzk5NEBxcS5jb20=; Quanming Zhao, cHJvZmVzc29yZ2tAMTYzLmNvbQ==

†These authors have contributed equally to this work and share first authorship

‡These authors have contributed equally to this work

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.