Skip to main content

CORRECTION article

Front. Mater., 06 March 2024
Sec. Mechanics of Materials
Volume 11 - 2024 | https://doi.org/10.3389/fmats.2024.1388987

Corrigendum: Fabrication and surface characterization of titanium dioxide nanotubes on titanium implants

This article is a correction to:

  1. Fabrication and surface characterization of titanium dioxide nanotubes on titanium implants

    1. Read original article
Hongming Zheng&#x;Hongming Zheng1†Li Xu&#x;Li Xu1†Yang JiaoYang Jiao2Yan XiaYan Xia1Xinglin WuXinglin Wu3Kaihang LuKaihang Lu3Pengpeng ZhangPengpeng Zhang3Quanming Zhao &#x;Quanming Zhao4*‡Lu Zhang &#x;Lu Zhang4*‡Xiaohui Ni &#x;Xiaohui Ni4*‡
  • 1Department of Orthopedic Surgery, The People’s Hospital of Danyang, Danyang, China
  • 2Department of Stomatology, The Seventh Medical Center of PLA General Hospital, Beijing, China
  • 3Department of Orthopedics, Guizhou Provincial People’s Hospital, Guiyang, Guizhou, China
  • 4Department of Orthopedics, Dafeng People’s Hospital, Yancheng, Jiangsu, China

A Corrigendum on
Fabrication and surface characterization of titanium dioxide nanotubes on titanium implants

by Zheng H, Xu L, Jiao Y, Xia Y, Wu X, Lu K, Zhang P, Zhao Q, Zhang L and Ni X (2023). Front. Mater. 10:1325997. doi: 10.3389/fmats.2023.1325997

In the published article, there was an error regarding the e-mail for Quanming Zhao. Instead of “gzdxfsyy@163.com,” it should be “professorgk@163.com.” The “‡” sign was also not used to mark the equal contributions of Xiaohui Ni, Lu Zhang and Quanming Zhao.

The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Keywords: anodic oxidation, TiO2 nanotubes, bioactive coating, corrosion resistance, titanium implants

Citation: Zheng H, Xu L, Jiao Y, Xia Y, Wu X, Lu K, Zhang P, Zhao Q, Zhang L and Ni X (2024) Corrigendum: Fabrication and surface characterization of titanium dioxide nanotubes on titanium implants. Front. Mater. 11:1388987. doi: 10.3389/fmats.2024.1388987

Received: 20 February 2024; Accepted: 21 February 2024;
Published: 06 March 2024.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2024 Zheng, Xu, Jiao, Xia, Wu, Lu, Zhang, Zhao, Zhang and Ni. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Quanming Zhao, professorgk@163.com; Lu Zhang, 2272283994@qq.com; Xiaohui Ni, nixiaohui@jsmc.edu.cn

†These authors have contributed equally to this work and share first authorship

‡These authors have contributed equally to this work

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.