Skip to main content

CORRECTION article

Front. Mater., 01 November 2023
Sec. Semiconducting Materials and Devices
Volume 10 - 2023 | https://doi.org/10.3389/fmats.2023.1290821

Corrigendum: High performance surface plasmon resonance based sensor using black phosphorus and magnesium oxide adhesion layer

This article is a correction to:

  1. High performance surface plasmon resonance based sensor using black phosphorus and magnesium oxide adhesion layer

    1. Read original article
Shatrughna Kumar,Shatrughna Kumar1,2Archana Yadav, Archana Yadav3,4*Boris A. Malomed,Boris A. Malomed2,5
  • 1Department of Electronics Engineering, Indian Institute of Technology (Indian Institute of Mines), Dhanbad, Jharkhand, India
  • 2Department of Physical Electronics, School of Electrical Engineering, Faculty of Engineering and Center for Light-Matter Interaction, Tel Aviv University, Tel Aviv, Israel
  • 3Department of Electronics and Communication Engineering, ASET Amity University, Nodia, Uttar Pradesh, India
  • 4Department of Electronics and Communication Engineering, Faculty of Engineering Integral University, Lucknow, Uttar Pradesh, India
  • 5Instituto de Alta Investigación, Universidad de Tarapacá, Arica, Chile

A Corrigendum on
High performance surface plasmon resonance based sensor using black phosphorus and magnesium oxide adhesion layer

by Kumar S, Yadav A and Malomed BA (2023). Front. Mater. 10:1131412. doi: 10.3389/fmats.2023.1131412

In the published article, there was an error in the correspondence section. The corresponding author was incorrect. A correction has been made to the Correspondence section. This sentence previously stated: “*Correspondence: Shatrughna Kumar, shatruism15@gmail.com”

The corrected sentence appears below:

“*Correspondence: Archana Yadav, archanayadav.ay@gmail.com”

The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Keywords: surface plasmon resonance, sensitivity, black phosphorus, magnesium oxide, biosensor

Citation: Kumar S, Yadav A and Malomed BA (2023) Corrigendum: High performance surface plasmon resonance based sensor using black phosphorus and magnesium oxide adhesion layer. Front. Mater. 10:1290821. doi: 10.3389/fmats.2023.1290821

Received: 08 September 2023; Accepted: 23 October 2023;
Published: 01 November 2023.

Approved by:

Frontiers Editorial Office, Frontiers Media SA, Switzerland

Copyright © 2023 Kumar, Yadav and Malomed. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Archana Yadav, YXJjaGFuYXlhZGF2LmF5QGdtYWlsLmNvbQ==

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.