Skip to main content

CORRECTION article

Front. Mater., 27 June 2023
Sec. Structural Materials

Corrigendum: Characterization of strength and quality of cemented mine backfill made up of lead-zinc processing tailings

  • 1Department of Mining Engineering, Faculty of Engineering, Istanbul University-Cerrahpasa, Istanbul, Turkiye
  • 2Department of Civil Engineering, Geotechnical Division, Recep Tayyip Erdogan University, Rize, Turkiye

A Corrigendum on
Characterization of strength and quality of cemented mine backfill made up of lead-zinc processing tailings

by Akkaya UG, Cinku K and Yilmaz E (2021). Front. Mater. 8:740116. doi: 10.3389/fmats.2021.740116

In the published article there is a missing Reference. This has now been inserted in Table 3 and should read:

“TABLE 3 | ICP MS results of the tailings (Tuylu, 2016).”

The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

References

Tuylu, S. (2016). Determination of optimum design conditions of paste materials for disposal of mineral processing tailings (in Turkish). Istanbul: I.U. Institute of Science and Technology. PhD Thesis.

Google Scholar

Keywords: sulphurous tailing, sulphate attack, mine backfill, hydraulic binder, mechanical strength

Citation: Akkaya UG, Çinku K and Yilmaz E (2023) Corrigendum: Characterization of strength and quality of cemented mine backfill made up of lead-zinc processing tailings. Front. Mater. 10:1228163. doi: 10.3389/fmats.2023.1228163

Received: 24 May 2023; Accepted: 20 June 2023;
Published: 27 June 2023.

Edited by:

Antonio Caggiano, Darmstadt University of Technology, Germany

Reviewed by:

Xiao Gu, Northeastern University, China
Ahmad Jamshidi, Tarbiat Modares University, Iran

Copyright © 2023 Akkaya, Çinku and Yilmaz. This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

*Correspondence: Ufuk Gökhan Akkaya, dWZ1a2hhbkBpdWMuZWR1LnRy

Disclaimer: All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.